Model MM9xMS-3 Model MM9xMS-13 Double Balanced Mixer Multi-Octave Band (1) : Conditions Parameter SSB Conversion loss:(2) (3) RF(GHz) 5.0-18.5 5.0-18.5 5.0-18.5 4.0-20.0 4.0-20.0 4.0-20.0 Isolation LO to RF: LO(GHz) 5.0-18.5 5.0-18.5 5.0-18.5 4.0-20.0 4.0-20.0 4.0-20.0 Specifications IF(MHz) DC-500 DC-2000 DC-4000 DC-500 DC-2000 DC-4000 4.0-5.0 5.0-20.0 4.0-7.0 7.0-20.0 LO to IF: RF to IF: Input 1-dB Compression Point: 4.0-20.0 4.0-20.0 4.0-20.0 DC-4000 Input Third Order Intercept Point: 4.0-20.0 4.0-20.0 DC-4000 4.0-20.0 4.0-20.0 DC-4000 LO Power: (4) Min Typical 6.5 dB 7.0 dB 8.0 dB 7.0 dB 7.5 dB 8.5 dB Max 8.0 dB 8.5 dB 9.5 dB 9.5 dB 10.0 dB 11.5 dB 20 25 16 20 30 dB 38 dB 21 dB 27 dB 20 dB +2 dBm +5 dBm +8 dBm +12 dBm +11 dBm +14 dBm +18 dBm +21 dBm +7 dBm +10 dBm +14 dBm +18 dBm MM93 MM94 MM96 MM97 MM93 MM94 MM96 MM97 MM93 MM94 MM96 MM97 dB dB dB dB LO Power 3 = +7 dBm 4 = +10 dBm 6 = +14 dBm 7 = +18 dBm Mixers Electrical Specifications RF 4.0 to 20.0 GHz Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. MM9xMS-3 Outline: MS3C Typical Performance at 25˚C MHz MM9xMS-13 Outline: MS3D ECTRU MHz MICROWAVE INC. M SP All dimensions are in inches and [mm]. A Spectrum Control Business SPECTRUM MICROWAVE • 2144 Franklin Drive N.E. • Palm Bay, Florida 32905 • Phone: (888) 553-7531 • Fax: (888) 553-7532 www.specwave.com SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 625