EVERLIGHT ELECTRONICS CO., LTD. DATA SHEET Part No. ：67-03/BHGHR6W-B11/2T Date ：2007.09.21 Department：RD3 Revision ：1.1 Received □ MASS PRODUCTION ■ PRELIMINARY □ CUSTOMER DESIGN PAGE : 14 Revised record REV. DESCRIPTION RELEASE DATE 1.1 New Spec. 2007.9.21 OFFICE:.NO.25,LANE76,SEC.3,CHUNG YANG RD.,TUCHENG 236,TAIPEI,TAIWAN,R.O.C TEL : 886-2-22672000 FAX : 886-2-22676244 http://www.everlight.com EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T Features ․P-LCC-4 package. ․White package and black surface. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain with RoHS compliant version Descriptions ․The 67-03 series is available in soft orange, green, blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Emitted Color Type R6 Material AlGaInP Brilliant Red GH InGaN Brilliant Green BH InGaN Blue Resin Color White Diffuse Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 1 of 14 Device No. : Prepared date: 21-Sep-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T Package Outline Dimensions 3 CL 4 1 2 2.8±0.2 3 0.7±0.1 2.2±0.1 CL 4 2 1 3.2±0.2 3.5±0.2 0.15±0.05 0.8±0.1 1.9±0.2 0.5±0.1 2.4±0.1 2.8±0.2 2.7±0.2 Recommended soldering pad design 1.6 0.7 1.8 1.8 2.2 0.8±0.1 Notes: 1. All dimensions are in millimeters 2. Tolerance unless mentioned is ±0.1mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 2 of 14 Device No. : Prepared date: 21-Sep-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF Peak Forward Current (Duty 1/10 @ 1KHz) IFP Pd Power Dissipation Electrostatic Discharge(HBM) ESD R6 50 GH 25 BH 25 R6 100 GH 100 BH 100 R6 120 GH 110 BH 110 R6 2000 GH 150 BH 150 mA mA mW V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 3 of 14 Device No. : Prepared date: 21-Sep-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous Intensity IV λp Peak Wavelength λd Dominant Wavelength Spectrum Radiation Bandwidth △λ Forward Voltage Viewing Angle Reverse Current VF Min. Typ. Max. R6 200 ----- 345 GH 500 ----- 860 BH 165 ----- 285 R6 ----- 632 ----- GH ----- 518 ----- BH ----- 468 ----- R6 619 ----- 628 GH 525 ----- 532.5 BH 465 ----- 472.5 R6 ----- 20 ----- GH ----- 35 ----- BH ----- 35 ----- R6 1.75 ----- 2.35 GH 2.9 ----- 3.5 BH 2.9 ----- 3.5 ----- 120 ----- R6 ----- ----- 10 GH ----- ----- 50 BH ----- ----- 50 2θ1/2 IR Unit Condition mcd IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA V IF=20mA deg IF=20mA μA VR=5V Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±11% Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 4 of 14 Device No. : Prepared date: 21-Sep-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T Bin Range of Luminous Intensity Symbol Bin Code Min. Max. 6 200 240 7 240 285 8 285 345 11 500 600 12 600 720 13 720 860 5 165 200 6 200 240 7 240 285 Bin Code Min. Max. R1 619 622 R2 622 625 R3 625 628 G1 525 527.5 G2 527.5 530 G3 530 532.5 B1 465 467.5 B2 467.5 470 B3 470 472.5 R6 Iv GB B7 Unit Condition mcd IF =20mA Unit Condition nm IF =20mA Bin Range of Dominant Wavelength Symbol RS λd GB B7 Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 5 of 14 Device No. : Prepared date: 21-Sep-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T Bin Range of Forward Voltage Symbol RS VF GB B7 Bin Code Min. Max. 0 1.75 1.95 1 1.95 2.15 2 2.15 2.35 11 2.90 3.10 12 3.10 3.30 13 3.30 3.50 11 2.90 3.10 12 3.10 3.30 13 3.30 3.50 Unit Condition V IF =20mA Note: 1. Tolerance of Forward Voltage: ±11% Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 6 of 14 Device No. : Prepared date: 21-Sep-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T Typical Electro-Optical Characteristics Curves (BH) Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C IF (mA) Forward Current 75 50 25 0 400 1000 450 500 550 Wavelength λ (nm) 10 1 -40 -20 0 20 40 40 30 20 10 0 2.6 1000 3.6 4.0 f=1KHz Duty=1/10 100 10 1 0 10 60 80 100 1 2 10 3 10 10 Forward current I F (mA) Radiation Diagram Forward Current Derating Curve 0° 50 IF (mA) 3.2 Relative Luminous Intensity vs. Forward Current Ta=25°C Ambient temperature Ta (°c) Forward Current 2.8 Forward Voltage V F (V) Relative Luminous Intensity vs. Ambient Temperature 100 Ta=25°C 50 600 Relative luminous intensity (%) Relative luminous intensity (%) Relative luminous intensity (%) 100 10° Ta=25°C 20° 30° 40 30 20 10 0 40° 1.0 0.9 50° 0.8 60° 70° 0.7 0 20 40 60 80 100 Ambient temperature Ta (°c) 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 7 of 14 Device No. : Prepared date: 21-Sep-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T Typical Electro-Optical Characteristics Curves (GB) Forward Current vs. Forward Voltage Ta=25°C IF (mA) 100 Forward Current 75 50 25 0 400 1000 450 500 550 Wavelength λ (nm) 40 30 20 10 0 2.4 2.6 2.8 3.2 3.6 100 10 0 20 40 60 80 100 Relative Luminous Intensity vs. Forward Current Ta=25°C 1000 f=1KHz Duty=1/10 100 10 1 0 10 2 1 10 10 Forward Current Ambient Temperature Ta (°C) IF(mA) Radiation Diagram IF (mA) 0° Forward Current 4.0 Forward Voltage VF (V) Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 Ta=25°C 50 600 Relative luminous intensity (%) Relative luminous intensity (%) Relative luminous intensity (%) Spectrum Distribution 10° 50 Ta=25°C 20° 30° 40 30 20 10 0 40° 1.0 0.9 50° 0.8 60° 70° 0.7 0 20 40 60 80 100 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 8 of 14 Device No. : Prepared date: 21-Sep-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T Typical Electro-Optical Characteristics Curves (RS) Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C 50 Forward Current I F (mA) Relative luminous intensity (%) 100 75 50 25 0 550 600 650 700 Wavelength λ (nm) 40 30 20 10 0 2.0 2.4 1000 3.0 Relative Luminous Intensity vs. Forward Current Ta=25°C 100 10 1000 f=1KHz Duty=1/10 100 0 20 40 60 80 100 Ambient Temperature Ta (°C) 10 1 0 10 2 1 10 10 Forward Current I F (mA) Radiation Diagram Forward Current Derating Curve 0° 10° 60 Forward Current I F (mA) 2.8 Forward Voltage VF (V) Relative luminous intensity (%) Relative luminous intensity (%) 1.6 1.2 750 Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 Ta=25°C 3 10 Ta=25°C 20° 30° 50 40 40° 1.0 30 0.9 50° 20 0.8 60° 10 0.7 0 0 20 40 60 80 100 70° 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta(°C) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 9 of 14 Device No. : Prepared date: 21-Sep-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: Tolerance unless mentioned is ±0.1mm; Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 10 of 14 Device No. : Prepared date: 21-Sep-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. + Note: Tolerance unless mentioned is ±0.1mm; Unit = mm Moisture Resistant Packaging Label Aluminum moistue-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 11 of 14 Device No. : Prepared date: 21-Sep-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering Test Hours/Cycles Sample Size Ac/Re 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min 2 Temperature Cycle ∫ 5 min L : -40℃ 15min H : +100℃ 5min 3 Thermal Shock 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 12 of 14 Device No. : Prepared date: 21-Sep-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 13 of 14 Device No. : Prepared date: 21-Sep-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 14 of 14 Device No. : Prepared date: 21-Sep-2007 Prepared by: Josh Chou