Low Current, High Performance NPN Silicon Bipolar Transistor Technical Data AT-30511 AT-30533 Features Description • High Performance Bipolar Transistor Optimized for Low Current, Low Voltage Operation • 900 MHz Performance: AT-30511: 1.1 dB NF, 16 dB GA AT-30533: 1.1 dB NF, 13 dB GA • Characterized for End-OfLife Battery Use (2.7 V) • SOT-23 and SOT-143 SMT Plastic Packages • Tape-And-Reel Packaging Option Available[1] Hewlett-Packard’s AT-30511 and AT-30533 are high performance NPN bipolar transistors that have been optimized for maximum fT at low voltage operation, making them ideal for use in battery powered applications in wireless markets. The AT-30533 uses the 3 lead SOT-23, while the AT-30511 places the same die in the higher performance 4 lead SOT-143. Both packages are industry standard, and compatible with high volume surface mount assembly techniques. Outline Drawing EMITTER COLLECTOR 305 BASE EMITTER SOT-143 (AT-30511) COLLECTOR 305 BASE The 3.2 micron emitter-to-emitter pitch and reduced parasitic design of these transistors yields extremely high performance products that can perform a multiplicity of tasks. The 5 emitter finger interdigitated geometry yields an extremely fast transistor with high gain and low operating currents. Optimized performance at 2.7 V makes these devices ideal for use in 900 MHz, 1.8 GHz, and 2.4 GHz battery operated systems as an LNA, gain stage, buffer, oscillator, or active mixer. Typical amplifier designs at 900 MHz yield 1.3 dB noise figures with 13 dB or more associated gain at a 2.7 V, 1 mA bias. Voltage breakdowns are high enough for use at 5 volts. High gain capability at 1 V, 1 mA makes these devices a good fit for 900␣ MHz pager applications. The AT-3 series bipolar transistors are fabricated using an optimized version of Hewlett- Packard’s 10␣ GHz f T, 30 GHz fMAX SelfAligned-Transistor (SAT) process. The die are nitride passivated for surface protection. Excellent device uniformity, performance and reliability are produced by the use of ion-implantation, selfalignment techniques, and gold metalization in the fabrication of these devices. EMITTER SOT-23 (AT-30533) Note: 1. Refer to “Tape-and-Reel Packaging for Semiconductor Devices”. 4-23 5965-8918E AT-30511, AT-30533 Absolute Maximum Ratings Symbol VEBO VCBO VCEO IC PT Tj TSTG [1] Parameter Units Emitter-Base Voltage V Collector-Base Voltage V Collector-Emitter Voltage V Collector Current mA Power Dissipation[2] [3] mW Junction Temperature °C Storage Temperature °C [2] Absolute Maximum 1.5 11 5.5 8 100 150 -65 to 150 Thermal Resistance : θ jc = 550°C/W Notes: 1. Operation of this device above any one of these parameters may cause permanent damage. 2. TMounting Surface = 25°C. 3. Derate at 1.82 mW/°C for TC > 95°C. Electrical Specifications, TA = 25°C AT-30511 Symbol NF Parameters and Test Conditions Units Min Typ AT-30533 Max Min Typ Max Noise Figure VCE = 2.7 V, IC = 1 mA f = 0.9 GHz dB Associated Gain VCE = 2.7 V, IC = 1 mA f = 0.9 GHz dB hFE Forward Current Transfer Ratio VCE = 2.7 V IC = 1 mA - ICBO Collector Cutoff Current VCB = 3 V µA 0.03 0.2 0.03 0.2 IEBO Emitter Cutoff Current VEB = 1 V µA 0.1 1.5 0.1 1.5 GA [1] 1.1 [1] 14 [1] 70 VCC W = 10 L = 1860 W = 10 L = 1860 25 Ω 1000 pF 1000 pF W = 10 L = 1000 W = 30 L = 100 TEST CIRCUIT BOARD MATL = 0.062" FR-4 (ε = 4.8) DIMENSIONS IN MILS W = 30 L = 100 W = 10 L = 1025 TEST CIRCUIT A: W = 20 L = 100 TEST CIRCUIT B: W = 20 L = 200 x 2 NOT TO SCALE Figure 1. Test Circuit for Noise Figure and Associated Gain. This Circuit is a Compromise Match Between Best Noise Figure, Best Gain, Stability, a Practical, Synthesizable Match, and a Circuit Capable of Matching Both the AT-305 and AT-310 Geometries. 4-24 [2] 1.1 [2] 16 11 300 Notes: 1. Test circuit B, Figure 1. Numbers reflect device performance de-embedded from circuit losses. Input loss = 0.4 dB; output loss = 0.4 dB. 2. Test circuit A, Figure 1. Numbers reflect device performance de-embedded from circuit losses. Input loss = 0.4 dB; output loss = 0.4 dB. VBB [1] 1.4 [2] 1.4 [2] 13 70 300 AT-30511, AT-30533 Characterization Information, TA = 25°C AT-30511 AT-30533 Symbol Parameters and Test Conditions P1dB G1dB IP3 |S21|E2 CCB Units Typ Typ Power at 1 dB Gain Compression (opt tuning) VCE = 2.7 V, IC = 5 mA f = 0.9 GHz dBm 7 7 Gain at 1 dB Gain Compression (opt tuning) VCE = 2.7 V, IC = 5 mA f = 0.9 GHz dB 16.5 15 Output Third Order Intercept Point, VCE = 2.7 V, IC = 5 mA (opt tuning) f = 0.9 GHz dBm 17 17 Gain in 50 Ω System; VCE = 2.7 V, IC = 1 mA f = 0.9 GHz dB 10 9 VCB = 3V, f = 1 MHz pF 0.04 0.04 Collector-Base Capacitance Typical Performance 5 mA 5 mA Ga (dB) 1.5 1.0 20 20 AMPLIFIER NF NF MIN. 15 Ga (dB) 2.0 NOISE FIGURE (dB) 25 25 2.5 10 15 10 1 mA 1 mA 0.5 5 5 1 mA 5 mA 0 0.5 1.0 1.5 2.0 0 2.5 0 0.5 FREQUENCY (GHz) 1.5 2.0 25 8 20 G 1dB (dBm) 5 mA 4 1.5 2.0 2.5 15 2 mA 10 FREQUENCY (GHz) Figure 5. AT-30511 and AT-30533 Power at 1 dB Gain Compression vs. Frequency and Current at VCE␣ = 2.7 V. 0 1.5 2.5 2 Figure 4. AT-30533 Associated Gain at Optimum Noise Match vs. Frequency and Current at VCE␣ = 2 .7 V. 20 5 mA 15 2 mA 10 5 5 1.0 1.0 25 2 mA 2 0.5 0.5 5 mA 6 0 0 FREQUENCY (GHz) Figure 3. AT-30511 Associated Gain at Optimum Noise Match vs. Frequency and Current at VCE␣ = 2 .7 V. 10 0 0 2.5 FREQUENCY (GHz) Figure 2. AT-30511 and AT-30533 Minimum Noise Figure and Amplifier NF[1] vs. Frequency and Current at VCE␣ = 2 .7 V. P 1dB (dBm) 1.0 G 1dB (dBm) 0 0 0 0.5 1.0 1.5 2.0 2.5 FREQUENCY (GHz) Figure 6. AT-30511 1 dB Compressed Gain vs. Frequency and Current at VCE␣ = 2.7 V. 0 0.5 1.0 1.5 2.0 2.5 FREQUENCY (GHz) Figure 7. AT-30533 1 dB Compressed Gain vs. Frequency and Current at VCE␣ = 2.7 V. Note: 1. Amplifier NF represents the noise figure which can be expected in a real circuit representing reasonable reflection coefficients and including circuit losses. 4-25 AT-30511, AT-30533 Typical Performance, continued 10 25 8 20 25 20 6 4 G 1dB (dBm) 5 mA G 1dB (dBm) P 1dB (dBm) 5 mA 15 2 mA 10 5 mA 15 2 mA 10 2 mA 5 2 0 0 0.5 1.0 1.5 2.0 2.5 0 0.5 Figure 8. AT-30511 and AT-30533 Power at 1 dB Gain Compression vs. Frequency and Current at VCE␣ = 5 V. 0 2.5 2.0 0 0.5 6 25 4 20 5 mA 0 1.0 1.5 2.0 2.5 FREQUENCY (GHz) Figure 9. AT-30511 1 dB Compressed Gain vs. Frequency and Current at VCE␣ = 5 V. G 1dB (dBm) P 1dB (dBm) 1.5 FREQUENCY (GHz) FREQUENCY (GHz) 2 1.0 Figure 10. AT-30533 1 dB Compressed Gain vs. Frequency and Current at VCE␣ = 5 V. 25 20 5 mA G 1dB (dBm) 0 5 15 2 mA 10 5 mA 15 2 mA 10 2 mA 5 -2 0.5 1.0 1.5 2.0 0 2.5 0 Figure 11. AT-30511 and AT-30533 Power at 1 dB Gain Compression vs. Frequency and Current at VCE␣ = 1 V. 2.0 20 2.0 Ga (dBm) 10 1.0 NF 0.5 50 0 100 TEMPERATURE (°C) Figure 14. AT-30511 Noise Figure and Associated Gain at VCE␣ = 2.7 V, IC␣ =␣ 1␣ mA vs. Temperature in Test Circuit, Figure 1. (Circuit Losses De-embedded) Ga (dBm) 2.5 1.5 0 0 0.5 Ga 15 1.5 1.0 10 NF 0 -50 0 50 2.0 2.5 Figure 13. AT-30533 1 dB Compressed Gain vs. Frequency and Current at VCE␣ = 1 V. IM3 (dBc) IM5 (dBc) IM7 (dBc) 0 100 TEMPERATURE (°C) Figure 15. AT-30533 Noise Figure and Associated Gain at VCE␣ = 2.7 V, IC␣ =␣ 1␣ mA vs. Temperature in Test Circuit, Figure 1. (Circuit Losses De-embedded) 4-26 1.5 0 0.5 5 1.0 FREQUENCY (GHz) 25 15 0 -50 0 2.5 2.0 2.5 Ga 5 1.5 Figure 12. AT-30511 1 dB Compressed Gain vs. Frequency and Current at VCE␣ = 1 V. NOISE FIGURE (dB) 20 1.0 FREQUENCY (GHz) FREQUENCY (GHz) 25 0.5 -20 IM3 (dBc) 0 NOISE FIGURE (dB) -4 5 -40 -60 -80 -9 -6 -3 0 3 6 POWER PER TONE (dBm) Figure 16. AT-30511 and AT-30533 Intermodulation Products vs. Output Power at VCE␣ = 2 .7 V, IC␣ = 10 mA, 900␣ MHz with Optimal Tuning. AT-30511 Typical Scattering Parameters, VCE = 1 V, IC = 1 mA, Common Emitter, ZO = 50 Ω Freq. GHz Mag S11 Ang 0.1 0.5 0.9 1.0 1.5 1.8 2.0 2.4 3.0 4.0 5.0 0.97 0.95 0.85 0.83 0.70 0.63 0.59 0.50 0.39 0.29 0.27 -5 -24 -42 -46 -67 -78 -85 -100 -122 -161 153 dB S21 Mag Ang dB S12 Mag Ang Mag 10.84 10.51 9.96 9.66 8.71 8.06 7.75 6.73 5.58 3.97 2.64 3.48 3.35 3.15 3.04 2.73 2.53 2.44 2.17 1.90 1.58 1.36 175 155 137 133 113 102 96 84 67 45 25 -39.42 -25.87 -21.46 -20.71 -18.44 -17.69 -17.27 -16.79 -16.32 -15.87 -15.47 0.01 0.05 0.08 0.09 0.12 0.13 0.14 0.14 0.15 0.16 0.17 86 72 61 58 46 41 37 32 27 20 20 0.99 0.95 0.92 0.91 0.84 0.80 0.77 0.73 0.68 0.63 0.61 S22 Ang -2 -14 -24 -26 -36 -40 -43 -48 -53 -63 -72 30 AT-30511 Typical Noise Parameters, Common Emitter, ZO = 50 Ω, 1 V, IC = 1 mA ΓOPT Freq GHz Fmin[1] dB Mag Ang 0.5[2] 0.9 1.8 2.4 0.3 0.4 0.9 1.3 0.96 0.92 0.83 0.76 10 19 43 60 20 GAIN (dB) Rn 1.49 1.33 0.98 0.74 MSG MAG 10 S21 0 Notes: 1. Matching constraints may make Fmin values associated with high |Γopt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. 0 1 MSG 2 3 5 4 FREQUENCY (GHz) Figure 17. AT-30511 Gains vs. Frequency at VCE␣ = 1 V, IC␣ = 1 mA. AT-30533 Typical Scattering Parameters, VCE = 1 V, IC = 1 mA, Common Emitter, ZO = 50 Ω Freq. GHz Mag S11 Ang 0.1 0.5 0.9 1.0 1.5 1.8 2.0 2.4 3.0 4.0 5.0 0.95 0.91 0.77 0.73 0.55 0.46 0.41 0.30 0.17 0.02 0.12 -5 -25 -41 -45 -62 -71 -76 -85 -95 -139 61 dB S21 Mag Ang dB S12 Mag Ang Mag 10.90 10.32 9.44 9.03 7.75 6.94 6.51 5.45 4.26 2.71 1.56 3.51 3.28 2.97 2.83 2.44 2.22 2.12 1.87 1.63 1.37 1.20 174 150 128 124 102 91 85 73 57 37 19 -38.36 -25.08 -20.95 -20.21 -18.13 -17.33 -16.84 -16.05 -14.80 -12.58 -10.14 0.01 0.06 0.09 0.10 0.12 0.14 0.14 0.16 0.18 0.24 0.31 87 73 63 61 54 51 50 49 49 48 45 0.99 0.95 0.89 0.88 0.80 0.77 0.74 0.71 0.68 0.65 0.62 S22 Ang -3 -14 -24 -25 -33 -36 -38 -41 -46 -57 -69 30 AT-30533 Typical Noise Parameters, Common Emitter, ZO = 50 Ω, 1 V, IC = 1 mA ΓOPT Fmin[1] dB Mag Ang 0.5[2] 0.9 1.8 2.4 0.3 0.4 0.9 1.3 0.94 0.89 0.75 0.65 7 16 43 65 Rn 1.02 0.86 0.58 0.38 Notes: 1. Matching constraints may make Fmin values associated with high |Γopt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. 4-27 GAIN (dB) 20 Freq GHz MSG MAG 10 S21 0 0 1 MSG 2 3 4 5 FREQUENCY (GHz) Figure 18. AT-30533 Gains vs. Frequency at VCE␣ = 2 .7 V, IC␣ = 1 mA. AT-30511 Typical Scattering Parameters, VCE = 2.7 V, IC = 1 mA, Common Emitter, ZO = 50 Ω Freq. GHz Mag S11 Ang 0.1 0.5 0.9 1.0 1.5 1.8 2.0 2.4 3.0 4.0 5.0 0.97 0.95 0.86 0.84 0.72 0.65 0.61 0.52 0.41 0.30 0.26 -5 -23 -39 -43 -63 -73 -80 -93 -114 -150 165 dB S21 Mag Ang dB S12 Mag Ang Mag S22 Ang 10.88 10.58 10.09 9.83 8.94 8.32 8.06 7.06 5.92 4.35 3.06 3.50 3.38 3.20 3.10 2.80 2.60 2.53 2.25 1.98 1.65 1.42 175 156 139 135 115 105 99 86 70 48 28 -40.13 -26.71 -22.28 -21.51 -19.15 -18.28 -17.83 -17.29 -16.72 -16.13 -15.65 0.01 0.05 0.08 0.08 0.11 0.12 0.13 0.14 0.15 0.16 0.16 86 74 63 60 49 43 40 35 30 23 22 0.999 0.96 0.93 0.92 0.85 0.82 0.79 0.75 0.70 0.66 0.63 -2 -13 -23 -25 -34 -38 -41 -46 -51 -61 -69 30 AT-30511 Typical Noise Parameters, Common Emitter, ZO = 50 Ω, 2.7 V, IC = 1 mA ΓOPT Freq GHz Fmin[1] dB Mag Ang 0.5[2] 0.9 1.8 2.4 0.3 0.4 0.9 1.3 0.96 0.92 0.83 0.76 10 19 43 60 20 GAIN (dB) Rn 1.49 1.33 0.98 0.74 MSG MAG 10 S21 0 Notes: 1. Matching constraints may make Fmin values associated with high |Γopt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. 0 1 2 4 3 5 FREQUENCY (GHz) Figure 19. AT-30511 Gains vs. Frequency at VCE␣ = 2 .7 V, IC␣ = 1 mA. AT-30533 Typical Scattering Parameters, VCE = 2.7 V, IC = 1 mA, Common Emitter, ZO = 50 Ω Freq. GHz Mag 0.1 0.5 0.9 1.0 1.5 1.8 2.0 2.4 3.0 4.0 5.0 0.95 0.92 0.78 0.75 0.58 0.49 0.44 0.33 0.21 0.05 0.09 S11 Ang -5 -23 -39 -42 -59 -66 -71 -79 -87 -88 47 dB S21 Mag Ang dB S12 Mag Ang Mag 10.76 10.21 9.42 9.04 7.83 7.04 6.64 5.59 4.40 2.87 1.72 3.45 3.24 2.96 2.83 2.46 2.25 2.15 1.90 1.66 1.39 1.22 174 151 130 126 105 94 88 76 60 40 22 -39.49 -26.05 -21.78 -21.05 -18.88 -18.08 -17.58 -16.77 -15.50 -13.20 -10.67 0.01 0.05 0.08 0.09 0.11 0.12 0.13 0.15 0.17 0.22 0.29 87 74 64 63 55 53 52 51 51 52 49 0.999 0.95 0.91 0.90 0.83 0.79 0.77 0.74 0.71 0.68 0.66 AT-30533 Typical Noise Parameters, S22 Ang -2 -13 -22 -23 -31 -34 -36 -39 -44 -54 -66 30 Common Emitter, ZO = 50 Ω, 2.7 V, IC = 1 mA ΓOPT Freq GHz Fmin[1] dB Mag Ang 0.5[2] 0.9 1.8 2.4 0.3 0.4 0.9 1.3 0.94 0.89 0.75 0.65 7 16 43 65 Rn Notes: 1. Matching constraints may make Fmin values associated with high |Γopt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. 4-28 GAIN (dB) 1.02 0.88 0.58 0.38 20 MSG MAG 10 0 MSG S21 0 1 2 3 4 5 FREQUENCY (GHz) Figure 20. AT-30511- Gains vs. Frequency at VCE␣ = 2 .7 V, IC␣ = 1 mA. AT-30511 Typical Scattering Parameters, VCE = 2.7 V, IC = 5 mA, Common Emitter, ZO = 50 Ω Freq. GHz Mag S11 Ang 0.1 0.5 0.9 1.0 1.5 1.8 2.0 2.4 3.0 4.0 5.0 0.88 0.70 0.49 0.46 0.30 0.24 0.21 0.16 0.13 0.15 0.21 -11 -48 -72 -77 -100 -112 -120 -140 -172 137 106 dB S21 Mag Ang dB S12 Mag Ang Mag 22.49 20.42 17.77 17.09 14.44 13.10 12.31 10.94 9.18 7.03 5.44 13.32 10.49 7.73 7.15 5.27 4.52 4.13 3.52 2.88 2.25 1.87 169 134 111 107 89 81 76 67 55 38 22 -40.50 -28.45 -25.24 -24.70 -22.62 -21.65 -21.05 -20.01 -18.55 -16.57 -14.88 0.01 0.04 0.05 0.06 0.07 0.08 0.09 0.10 0.12 0.15 0.18 83 64 57 55 53 52 52 50 48 44 39 0.97 0.82 0.70 0.69 0.62 0.59 0.58 0.57 0.55 0.53 0.52 S22 Ang -5 -22 -30 -31 -35 -37 -39 -42 -46 -55 -64 30 AT-30511 Typical Noise Parameters, Common Emitter, ZO = 50 Ω, 2.7 V, IC = 5 mA MSG ΓOPT Freq GHz Fmin[1] dB Mag Ang 0.5[2] 1.1 1.2 1.5 1.8 0.77 0.71 0.60 0.51 9 18 45 65 0.9 1.8 2.4 20 GAIN (dB) Rn 1.10 0.96 0.66 0.47 0 Notes: 1. Matching constraints may make Fmin values associated with high |Γopt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. S21 10 0 1 MAG 2 3 5 4 FREQUENCY (GHz) Figure 21. AT-30511 Gains vs. Frequency at VCE␣ = 2.7 V, IC␣ = 5 mA. AT-30533 Typical Scattering Parameters, VCE = 2.7 V, IC = 5 mA, Common Emitter, ZO = 50 Ω Freq. GHz 0.1 0.5 0.9 1.0 1.5 1.8 2.0 2.4 3.0 4.0 5.0 S11 Mag Ang 0.84 0.57 0.37 0.34 0.23 0.20 0.19 0.17 0.15 0.15 0.17 -12 -39 -46 -46 -43 -38 -35 -27 -17 -2 11 dB S21 Mag Ang dB S12 Mag Ang Mag S22 Ang 22.26 18.54 14.97 14.20 11.24 9.85 9.05 7.70 6.12 4.30 3.07 12.98 8.46 5.60 5.13 3.65 3.11 2.84 2.43 2.02 1.64 1.42 164 121 100 96 81 73 69 61 50 34 19 -39.96 -28.03 -24.09 -23.32 -20.30 -18.88 -18.02 -16.50 -14.57 -11.90 -9.66 0.01 0.04 0.06 0.07 0.10 0.11 0.13 0.15 0.19 0.25 0.33 82 71 70 69 68 67 66 64 61 55 47 0.98 0.80 0.73 0.72 0.69 0.68 0.68 0.67 0.66 0.64 0.61 -5 -18 -22 -22 -26 -28 -30 -33 -39 -49 -61 AT-30533 Typical Noise Parameters, 30 Common Emitter, ZO = 50 Ω, 2.7 V, IC = 5 mA ΓOPT Freq GHz Fmin[1] dB Mag Ang 0.5[2] 0.9 1.8 2.4 1.1 1.2 1.5 1.8 0.71 0.61 0.42 0.28 8 16 39 57 Rn Notes: 1. Matching constraints may make Fmin values associated with high |Γopt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. 4-29 GAIN (dB) 0.78 0.66 0.41 0.25 20 MSG MAG 10 0 MSG S21 0 1 2 3 4 5 FREQUENCY (GHz) Figure 22. AT-30533 Gains vs. Frequency at VCE␣ = 2 .7 V, IC␣ = 5 mA. AT-30511 Typical Scattering Parameters, VCE = 5 V, IC = 1 mA, Common Emitter, ZO = 50 Ω Freq. GHz Mag S11 Ang 0.1 0.5 0.9 1.0 1.5 1.8 2.0 2.4 3.0 4.0 5.0 0.98 0.96 0.88 0.85 0.74 0.67 0.63 0.55 0.43 0.31 0.25 -5 -21 -37 -41 -59 -69 -75 -88 -106 -138 178 dB S21 Mag Ang dB S12 Mag Ang Mag 10.56 10.30 9.83 9.57 8.71 8.13 7.88 6.90 5.79 4.29 3.04 3.37 3.27 3.10 3.01 2.73 2.55 2.48 2.21 1.95 1.64 1.42 175 157 139 136 116 106 100 87 71 49 29 -40.34 -26.99 -22.52 -21.75 -19.23 -18.34 -17.85 -17.23 -16.53 -15.83 -15.38 0.01 0.04 0.07 0.08 0.11 0.12 0.13 0.14 0.15 0.16 0.17 87 74 64 62 51 45 42 37 31 23 20 0.999 0.96 0.93 0.92 0.86 0.82 0.80 0.77 0.72 0.67 0.64 S22 Ang -2 -13 -22 -24 -33 -38 -41 -45 -50 -60 -69 30 AT-30511 Typical Noise Parameters, Common Emitter, ZO = 50 Ω, 5 V, IC = 1 mA ΓOPT Freq GHz Fmin[1] dB Mag Ang 0.5[2] 0.9 1.8 2.4 0.3 0.4 0.9 1.3 0.96 0.92 0.83 0.76 10 19 43 60 20 GAIN (dB) Rn 1.49 1.33 0.98 0.74 MSG MAG 10 S21 0 Notes: 1. Matching constraints may make Fmin values associated with high |Γopt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. 0 1 2 3 5 4 FREQUENCY (GHz) Figure 23. AT-30511 Gains vs. Frequency at VCE␣ = 5 V, IC␣ = 1 mA. AT-30533 Typical Scattering Parameters, VCE = 5 V, IC = 1 mA, Common Emitter, ZO = 50 Ω Freq. GHz Mag 0.1 0.5 0.9 1.0 1.5 1.8 2.0 2.4 3.0 4.0 5.0 0.96 0.92 0.79 0.77 0.60 0.51 0.46 0.35 0.23 0.07 0.07 S11 Ang -5 -22 -37 -41 -57 -64 -69 -76 -83 -85 38 dB S21 Mag Ang dB S12 Mag Ang Mag 10.59 10.07 9.32 8.94 7.76 7.01 6.61 5.59 4.43 2.92 1.79 3.38 3.19 2.92 2.80 2.44 2.24 2.14 1.90 1.66 1.40 1.23 174 151 131 127 106 95 89 77 61 41 23 -39.38 -26.22 -21.99 -21.21 -19.02 -18.16 -17.66 -16.85 -15.58 -13.34 -10.85 0.01 0.05 0.08 0.09 0.11 0.12 0.13 0.14 0.17 0.22 0.29 85 74 65 63 56 54 52 51 51 52 49 0.999 0.95 0.91 0.90 0.83 0.80 0.78 0.75 0.72 0.69 0.67 S22 Ang -2 -13 -21 -23 -30 -33 -35 -39 -43 -53 -65 30 AT-30533 Typical Noise Parameters, Common Emitter, ZO = 50 Ω, 5 V, IC = 1 mA Fmin[1] dB Mag Ang 0.5[2] 0.9 1.8 2.4 0.3 0.4 0.9 1.3 0.94 0.89 0.75 0.65 7 16 43 65 Rn 1.02 0.98 0.58 0.38 Notes: 1. Matching constraints may make Fmin values associated with high |ΓOPT| values unachievable in physical circuits. See Figure 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. 4-30 20 GAIN (dB) ΓOPT Freq GHz MSG MAG 10 S21 0 0 1 MSG 2 3 4 FREQUENCY (GHz) Figure 24. AT-30533 Gains vs. Frequency at VCE␣ = 5 V, IC␣ = 1 mA. 5 AT-30511 Typical Scattering Parameters, VCE = 5 V, IC = 5 mA, Common Emitter, ZO = 50 Ω Freq. GHz Mag S11 Ang 0.1 0.5 0.9 1.0 1.5 1.8 2.0 2.4 3.0 4.0 5.0 0.90 0.74 0.53 0.49 0.33 0.27 0.24 0.18 0.12 0.11 0.17 -10 -43 -66 -70 -89 -99 -105 -120 -147 154 114 dB S21 Mag Ang dB S12 Mag Ang Mag 22.26 20.41 17.93 17.28 14.72 13.41 12.64 11.27 9.54 7.41 5.86 12.98 10.49 7.88 7.31 5.45 4.68 4.29 3.66 3.00 2.35 1.96 170 136 113 109 91 83 78 69 57 40 24 -40.75 -28.46 -25.18 -24.53 -22.46 -21.45 -20.87 -19.79 -18.34 -16.45 -14.84 0.01 0.04 0.06 0.06 0.08 0.08 0.09 0.10 0.12 0.15 0.18 82 66 58 57 54 53 52 50 48 43 38 0.97 0.83 0.72 0.70 0.63 0.60 0.59 0.57 0.55 0.53 0.52 S22 Ang -5 -22 -30 -31 -36 -38 -39 -42 -46 -55 -63 30 AT-30511 Typical Noise Parameters, Common Emitter, ZO = 50 Ω, 5 V, IC = 5 mA ΓOPT Freq GHz Fmin[1] dB Mag Ang 0.5[2] 0.9 1.8 2.4 1.1 1.2 1.5 1.8 0.77 0.71 0.60 0.51 9 18 45 65 MSG 20 GAIN (dB) Rn 1.10 0.96 0.66 0.47 S21 0 Notes: 1. Matching constraints may make Fmin values associated with high |Γopt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. MAG 10 0 1 2 3 5 4 FREQUENCY (GHz) Figure 25. AT-30511 Gains vs. Frequency at VCE␣ = 5 V, IC␣ = 5 mA. AT-30533 Typical Scattering Parameters, VCE = 5 V, IC = 5 mA, Common Emitter, ZO = 50 Ω Freq. GHz Mag 0.1 0.5 0.9 1.0 1.5 1.8 2.0 2.4 3.0 4.0 5.0 0.86 0.59 0.40 0.37 0.27 0.24 0.23 0.20 0.18 0.17 0.16 S11 Ang -11 -37 -43 -43 -40 -37 -35 -30 -24 -14 -2 dB S21 Mag Ang dB S12 Mag Ang Mag 22.22 18.69 15.19 14.43 11.49 10.11 9.33 7.97 6.40 4.58 3.37 12.92 8.60 5.75 5.27 3.75 3.20 2.93 2.50 2.09 1.70 1.47 165 122 101 97 82 75 70 62 51 36 21 -40.16 -28.05 -24.14 -23.37 -20.30 -18.88 -18.05 -16.55 -14.64 -12.00 -9.83 0.01 0.04 0.06 0.07 0.10 0.11 0.13 0.15 0.19 0.25 0.32 83 72 70 70 68 67 66 64 61 54 46 0.98 0.81 0.74 0.73 0.70 0.69 0.68 0.67 0.66 0.64 0.61 S22 Ang -5 -18 -22 -22 -26 -28 -30 -33 -38 -49 -60 30 AT-30533 Typical Noise Parameters, Common Emitter, ZO = 50 Ω, 5 V, IC = 5 mA Fmin[1] dB Mag Ang 0.5[2] 0.9 1.8 2.4 1.1 1.2 1.5 1.8 0.71 0.61 0.42 0.28 8 16 39 57 Rn 0.78 0.66 0.41 0.25 Notes: 1. Matching constraints may make Fmin values associated with high |Γopt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. 4-31 20 GAIN (dB) ΓOPT Freq GHz MSG MAG 10 0 MSG S21 0 1 2 3 4 FREQUENCY (GHz) Figure 26. AT-30533 Gains vs. Frequency at VCE␣ = 5 V, IC␣ = 5 mA. 5 Ordering Information Part Number Increment Comments AT-30511-BLK 100 Bulk AT-30511-TR1 3000 7" Reel AT-30533-BLK 100 Bulk AT-30533-TR1 3000 7" Reel Package Dimensions SOT-23 Plastic Package 1.02 (0.040) 0.89 (0.035) 0.54 (0.021) 0.37 (0.015) C PACKAGE MARKING CODE 1.40 (0.055) 1.20 (0.047) XXX B 2.65 (0.104) 2.10 (0.083) E 2.04 (0.080) 1.78 (0.070) 0.60 (0.024) 0.45 (0.018) TOP VIEW 3.06 (0.120) 2.80 (0.110) 0.152 (0.006) 0.066 (0.003) 1.02 (0.041) 0.85 (0.033) 0.69 (0.027) 0.45 (0.018) 0.10 (0.004) 0.013 (0.0005) SIDE VIEW END VIEW DIMENSIONS ARE IN MILLIMETERS (INCHES) SOT-143 Plastic Package 0.92 (0.036) 0.78 (0.031) PACKAGE MARKING CODE E C 1.40 (0.055) 1.20 (0.047) XXX B 2.65 (0.104) 2.10 (0.083) E 0.60 (0.024) 0.45 (0.018) 2.04 (0.080) 1.78 (0.070) 0.54 (0.021) 0.37 (0.015) 0.15 (0.006) 0.09 (0.003) 3.06 (0.120) 2.80 (0.110) 1.02 (0.041) 0.85 (0.033) 0.10 (0.004) 0.013 (0.0005) 0.69 (0.027) 0.45 (0.018) DIMENSIONS ARE IN MILLIMETERS (INCHES) 4-32