X3PM,X3AM Data sheet Pre-amplified/3V Excitation/Absolute Features . . . . Applications . . . . 3V excitation, Battery operation available Volt level output On-chip amplification and temperature compensations Pre-calibration of offset voltage and span Industrial instrumentation Medical device Barometer, Altimeter Altitude compensation Part number for ordering X3AM - 115KP A S R Terminal leads direction (See Outline Diagram) No mark : Rated pressure (Pa) Model X3PM X3AM R : Terminal leads configuration No mark : DIP(X3PM) S : Surface mount package (X3AM) Pressure type A : Absolute Pressure type Absolute pressure X3PM X3AM Dual-In-line-Package (DIP) Surface mount package Model Package configuration Measurable pressure range (kPa) 15 115 X3PM-115KPA Part number for ordering X3PM-115KPAR X3AM-115KPASR Specifications Model/Rated pressure 115KPA Recommended operating conditions Pressure type Absolute pressure Rated pressure 115 Measurable pressure range 15 115 Pressure media Non-corrosive gas only Excitation voltage 3.0 0.15 Absolute maximum rating Maximum load pressure Twice of rated pressure Maximum excitation voltage 6 Operating temperature 10 80 Storage temperature 20 100 Operating humidity 30 80 (No dew condensation) Electric performances/characteristics (Excitation voltage Vcc=3.0V constant, Ambient temperature Ta=25 ) Current consumption less than 6 Output impedance less than 10 Source current less than 0.1 Sink current less than 1 Mechanical response time 2 (For the reference) Full scale span voltage 1.5 Offset voltage 0.5 0.075 Full scale span voltage 2.0 0.075 Accuracy 5.0 Note ; Excluding input voltage error. 1 Unit kPa.abs kPa.abs VDC VDC RH mA mA mA msec V V V FS/0 50 X3PM,X3AM Data sheet Pre-amplified/3V Excitation/Absolute Outline dimensions Unit : mm X3PM (Absolute pressure) 8 5.5 12 Pressure port 2.85 5 4 1 2 3 3 R 14 4 5 6 3 2 1 15.24(600mil) 1. 5 6 C 5 5 0. Labelled faceplate 2.54 2.54 6- 0.9(Diameter of through holes) 6- 1.8(Diameter of lands) 2.54 2.54 1.2 0.5 60 Recommended footprint for PCB 2.8 6.8 15.2 (unit : mm) Unit : mm 0.25 X3PM-R (Absolute pressure) 5 4 1 2 3 8 Pressure port 2.85 4 5 6 3 2 1 0. C 15.24(600mil) 14 3 R 1. 5 6 5.5 max.15 12 5 5 2.54 2.54 Recommended footprint for PCB 6- 0.9(Diameter of through holes) 6- 1.8(Diameter of lands) 2.8 2.54 2.54 60 1.2 0.5 Labelled faceplate 6.8 15.2 2 (unit : mm) X3PM,X3AM Data sheet Pre-amplified/3V Excitation/Absolute Outline dimensions Unit : mm X3AM 2.54 2.54 2 3 7 1 Pressure port 6 5 4 0.8 7 Index X. 15 0.8 3.5 0.25 10 M AX. 0.15 1 3 MA 6 5 4 Labelled faceplate Recommended footprint for PCB 10.3 1 2 Land-pads 3 2.54 2.54 1.4 1.7 9.4 (unit : mm) Transfer Function Vout=Vs (P + ) (Pressure Error Temperature Error Multiplier Vs) Vs=3.0volts Notes ; The output voltage (Vout) is no perfect ratiometric with the power supply voltage. P=Input Pressure(kPa) Model pressure range Temperature Error Multiplier=1 050KPG(D) 100KPG(D) 100KPGV 100KPGW(DW) 200KPG(D) 001MPGW(D) 115KPA 0 50kPa 0 100kPa 0 100kPa 0 +100kPa 0 200kPa 0 1MPa 15 115kPa.abs 3 0.01 0.005 0.005 0.0025 0.0025 0.0025 0.005 0.1667 0.1667 0.1667 0.4667 0.1667 0.1667 0.09167 Pressure Error(kPa) 2.5 5.0 5.0 10.0 10.0 50.0 5.0 Pre-amplified/3V Excitation/Absolute X3PM,X3AM Data sheet Connection diagram X3PM (Absolute pressure) Vcc(DC3V) Vcc Vout Vout GND Remarks : C2 1) C1 : Connect 680pF capacitor within 2cm distance from leads. 2) C2 : Connect 0.01 F or more capacitor within 2cm distance from leads. 3) 2 and 3 pins must be No Connection. Open them as floating ones completely, and do NOT connect to other line or each other. X3AM C1 GND Vcc(DC3V) GND Vout Vout Vcc C2 Remarks : 1) C1 : Connect 680pF capacitor within 2cm distance from leads. 2) C2 : Connect 0.01 F or more capacitor within 2cm distance from leads. 3) 4 and 5 pins must be No Connection. Open them as floating ones completely, and do NOT connect to other line or each other. C1 GND Note ; Please read instruction “Notes” before using the sensor. Fujikura reserves the right to change specifications without notice. If you have any questions regarding technical issues or specifications, please contact us. Sensor Engineering Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan Phone +81-(0)3-5606-1072 Fax. +81-(0)3-5606-1538 4 E-mail : [email protected]