XFGM-3,XFGM-6 Data sheet Pre-amplified/5V Excitation/Gauge Features . . . . . Applications . Industrial instrumentation . Pressure switch, Pneumatic device . Medical device Two accuracy ranks, 1.5 FS and 2.5 FS available Volt level output On-chip amplification and temperature compensations Pre-calibration of offset voltage and span Non-corrosive liquid measurable (XFGMC only) Part number for ordering XFGM C - 3 025KP G S R H Accuracy No mark : 2.5 FS H : 1.5 FS Terminal leads direction(See Outline Diagram) R: Rated pressure (Pa) Length of the pressure port 3 : 3mm Terminal leads configuration 6 : 6mm S : Surface mount package Pressure type Available pressure media G : Gauge (Positive pressure) No mark : Non-corrosive gas only GV : Gauge (Negative pressure) GW : Gauge (Bipolar pressure) C : Non-corrosive gas and liquid Model XFGM Pressure type Gauge pressure XFGM-3 XFGM-6 Surface mount package, 3mm pressure port Surface mount package, 6mm pressure port Model Package configuration Measurable pressure range (kPa) 100 100 0 100 0 25 0 50 0 100 0 200 0 1000 XFGM-3100KPGWSR XFGM-3100KPGVSR XFGM-3025KPGSR XFGM-3050KPGSR XFGM-3100KPGSR XFGM-3200KPGSR XFGM-3001MPGSR XFGM-3100KPGWSRH XFGM-3100KPGVSRH XFGM-3025KPGSRH XFGM-3050KPGSRH XFGM-3100KPGSRH XFGM-3200KPGSRH XFGM-3001MPGSRH XFGMC-3100KPGWSR XFGMC-3100KPGVSR XFGMC-3025KPGSR XFGMC-3050KPGSR XFGMC-3100KPGSR XFGMC-3200KPGSR XFGMC-3001MPGSR 100KPGW(H) 100KPGV(H) 025KPG(H) Part number for ordering XFGMC-3100KPGWSRH XFGM-6100KPGWSR XFGMC-3100KPGVSRH XFGM-6100KPGVSR XFGMC-3025KPGSRH XFGM-6025KPGSR XFGMC-3050KPGSRH XFGM-6050KPGSR XFGMC-3100KPGSRH XFGM-6100KPGSR XFGMC-3200KPGSRH XFGM-6200KPGSR XFGMC-3001MPGSRH XFGM-6001MPGSR XFGM-6100KPGWSRH XFGM-6100KPGVSRH XFGM-6025KPGSRH XFGM-6050KPGSRH XFGM-6100KPGSRH XFGM-6200KPGSRH XFGM-6001MPGSRH XFGMC-6100KPGWSR XFGMC-6100KPGVSR XFGMC-6025KPGSR XFGMC-6050KPGSR XFGMC-6100KPGSR XFGMC-6200KPGSR XFGMC-6001MPGSR XFGMC-6100KPGWSRH XFGMC-6100KPGVSRH XFGMC-6025KPGSRH XFGMC-6050KPGSRH XFGMC-6100KPGSRH XFGMC-6200KPGSRH XFGMC-6001MPGSRH 200KPG(H) 001MPG(H) Unit 1000 10.20 0 1000 kPa kg/cm2 kPa Specifications Model/Rated pressure 050KPG(H) 100KPG(H) Recommended operating conditions Pressure type Gauge pressure 100 100 25 50 100 200 Rated pressure 1.020 1.020 0.255 0.510 1.020 2.040 Measurable pressure range 100 100 0 100 0 25 0 50 0 100 0 200 Pressure media 1 XFGM : Non-corrosive gas only, XFGMC : Non-corrosive gas and liquid Excitation voltage 5.0 0.25 Absolute maximum rating Maximum load pressure Twice of rated pressure Maximum excitation voltage 8 Operating temperature 40 125 Storage temperature 40 125 Operating humidity 30 80(No dew condensation) Electric performances/characteristics (Excitation voltage Vcc=5.0V constant, Ambient temperature Ta=25 ) Current consumption less than 10 Output impedance less than 10 Source current less than 0.2 Sink current less than 2 Mechanical response time 2 (For the reference) Full scale span voltage 4.5 Offset voltage 2 0.2 0.1125, 0.2 0.0675(H) Full scale span voltage 2 4.7 0.1125, 4.7 0.0675(H) Accuracy 2 2.5, 1.5(H) Note ; 1) Please consult us available liquid pressure media when you choose the C models. 2) Excluding input voltage error. 1 VDC 1.5times of rated pressure VDC RH mA mA mA msec V V V FS/0 85 XFGM-3,XFGM-6 Data sheet Pre-amplified/5V Excitation/Gauge Outline dimensions unit : mm XFGM-3 2.54 2.54 0.8 Pressure port 2 6 5 3 7 1 4 7 3 Vent hole 0.25 X. 15 0.8 6.5 3.5 0.15 3 Index MA Recommended footprint for PCB 10.3 5 4 Labelled faceplate 1.7 1 2.54 2.54 1.4 6 1 2 9.4 Land-pads 3 (unit : mm) unit : mm XFGM-6 2.54 2.54 0.8 Pressure port 2 6 5 3 7 1 4 7 Vent hole 3 10.3 6 5 4 2-R0.5 3.5 Recommended footprint for PCB 2- 1(Holes for projections) 1.4 1.7 1 Projections 1 2 3 Labelled faceplate Land-pads 6.2 Projections 2.54 2.54 MA 0.5 X. 15 0.8 0.25 9.5 6 Index 6.2 9.4 (unit : mm) 2 Pre-amplified/5V Excitation/Gauge XFGM-3,XFGM-6 Data sheet Connection diagram XFGM-3, FGM-6 Vcc(DC5V) Vcc Vout Vout GND C2 C1 Remarks : 1) C1 : Connect 680pF capacitor within 2cm distance from leads. 2) C2 : Connect 0.01 F or more capacitor within 2cm distance from leads. GND 3) 4 and 5 pins must be No Connection. Open them as floating ones completely, and do NOT connect to other line or each other. Note ; Please read instruction “Notes” before using the sensor. Fujikura reserves the right to change specifications without notice. If you have any questions regarding technical issues or specifications, please contact us. Sensor Engineering Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan Phone +81-(0)3-5606-1072 Fax. +81-(0)3-5606-1538 3 E-mail : [email protected]