CLR130,CLR131,CLR132 NPN Silicon Photodarlingtons Clairex ® Technologies, Inc. CLR130, CLR131, and CLR132 are exact replacements for obsolete part numbers CLR2169, CLR2170 and CLR2180. 0.210 (5.33) 0.190 (4.83) 0.190 (4.83) 0.176 (4.47) April, 2002 0.500 (12.7) min 0.215 (5.46) 0.205 (5.21) COLLECTOR 0.158 (4.01) 0.136 (3.45) BASE EMITTER 0.100 (2.54) dia 0.025 (0.64) max 0.060 (1.52) max 0.147 (3.73) 0.137 (3.48) 0.019 (0.48) 0.016 (0.41) ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) Case 17 features absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature ....................................................................... -65°C to +150°C • high sensitivity operating temperature ................................................................... -65°C to +125°C • ± 20° acceptance angle lead soldering temperature(1) ......................................................................... 260°C • custom aspheric lensed TO-18 collector-emitter voltage..................................................................................... 15V • transistor base is bonded continuous collector current ............................................................................ 50mA • usable throughout visible and near continuous power dissipation(2) .................................................................... 250mW infrared spectrum • RoHS compliant notes: 1. 0.06” (1.5mm) from the header for 5 seconds maximum description 2. Derate linearly 2.0mW/°C from 25°C free air temperature to TA = +125°C. The CLR130-CLR132 series are NPN silicon photodarlingtons mounted in TO-18 packages. Photodarlingtons allow high sensitivity at low irradiance levels. A custom double convex glass-to-metal sealed aspheric lens provides a narrow acceptance angle for excellent on-axis coupling. These devices are mechanically and spectrally matched to the CLE130-CLE133 series IREDs. For additional information, call Clairex. electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter IL Light current ICEO V(BR)CEO min typ max units Collector dark current 0.5 2.0 4.0 - - 100 mA mA mA nA Collector-emitter breakdown (1) CLR130 CLR131 CLR132 test conditions VCE=5V, Ee=0.06mW/cm2 VCE=10V, Ee=0 15 - - V IC=100µA tr Output time - 100 - µs VCE=5V, RL=100Ω. tf Output fall time - 150 - µs VCE=5V, RL=100Ω. Total angle at half sensitivity points - 40 - deg. θHP note: 1. Radiation source for all light current testing is a 940nm IRED. Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Revised 3/16/06 Plano, Texas 75074-8524 www.clairex.com