MCC 56 MCD 56 MDC 56 ITRMS = 2x 100 A ITAVM = 2x 64 A VRRM = 800-1800 V Thyristor Modules Thyristor/Diode Modules VRRM VDRM V V 900 1300 1500 1700 1900 800 1200 1400 1600 1800 TO-240 AA Type 1 Version 1 MCC MCC MCC MCC MCC 56-08io1 56-12io1 56-14io1 56-16io1 56-18io1 B MCD 56-08io1 B B MCD 56-12io1 B B -B MCD 56-16io1 B B -- MCC 56-14io1 MCC 56-16io1 700 MDC 56-06io1 B Symbol Test Conditions ITRMS, IFRMS ITAVM, IFAVM TVJ = TVJM TC = 83°C; 180° sine TC = 85°C; 180° sine ITSM, IFSM TVJ = 45°C; VR = 0 òi2dt (di/dt)cr MCC MCC MCC MCC MCC 4 5 56-08io8 56-12io8 56-14io8 56-16io8 56-18io8 B B B B B MCD MCD MCD MCD MCD 56-08io8 56-12io8 56-14io8 56-16io8 56-18io8 B B B B B Maximum Ratings 100 64 60 A A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1500 1600 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1350 1450 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 11 200 10 750 A2s A2 s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 9100 8830 A2 s A2 s TVJ = TVJM repetitive, IT = 150 A f =50 Hz, tP =200 ms VD = 2/3 VDRM IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/ms 150 A/ms TVJ = TVJM; VDR = 2/3 VDRM RGK = ¥; method 1 (linear voltage rise) PGM TVJ = TVJM IT = ITAVM 6 7 1 5 4 2 3 1 5 4 2 1 5 2 3 1 5 2 3 6 7 1 2 MCD Version 1 3 MCC Version 8 MCD Version 8 MDC Version 1 500 A/ms 1000 V/ms ● ● ● tP = 30 ms tP = 300 ms PGAV W W W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 °C °C °C 3000 3600 V~ V~ ● ● ● 50/60 Hz, RMS IISOL £ 1 mA t = 1 min t=1s Md Mounting torque (M5) Terminal connection torque (M5) 2.5-4.0/22-35 Nm/lb.in. 2.5-4.0/22-35 Nm/lb.in. Typical including screws Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions 90 g International standard package, JEDEC TO-240 AA Direct copper bonded Al2O3 -ceramic base plate Planar passivated chips Isolation voltage 3600 V~ UL registered, E 72873 Gate-cathode twin pins for version 1B Applications ● ● ● VISOL 6 Features 10 5 0.5 © 2000 IXYS All rights reserved 3 MCC Version 1 (dv/dt)cr Weight 7 Version 8 1500 1400 1700 1600 600 6 3 2 DC motor control Softstart AC motor controller Light, heat and temperature control Advantages ● ● ● ● Space and weight savings Simple mounting with two screws Improved temperature and power cycling Reduced protection circuits 031 VRSM VDSM 1-4 MCC 56 MCD 56 MDC 56 Symbol Test Conditions Characteristic Values IRRM, IDRM TVJ = TVJM; VR = VRRM; VD = VDRM VT, VF IT, IF = 200 A; TVJ = 25°C 1.57 V VT0 rT For power-loss calculations only (TVJ = 125°C) 0.85 3.7 V mW VGT VD = 6 V; IGT VD = 6 V; TVJ = 25°C TVJ = -40°C TVJ = 25°C TVJ = -40°C 1.5 1.6 100 200 V V mA mA VGD IGD TVJ = TVJM; VD = 2/3 VDRM 0.2 10 V mA IL TVJ = 25°C; tP = 10 ms; VD = 6 V IG = 0.45 A; diG/dt = 0.45 A/ms 450 mA 5 V 2: IGT, TVJ = 25°C 3: IGT, TVJ = -40°C VG 3 2 1 200 mA tgd TVJ = 25°C; VD = 1/2 VDRM IG = 0.45 A; diG/dt = 0.45 A/ms 2 ms tq TVJ = TVJM; IT = 150 A, tP = 200 ms; -di/dt = 10 A/ms typ. VR = 100 V; dv/dt = 20 V/ms; VD = 2/3 VDRM 150 ms QS IRM TVJ = TVJM; IT, IF = 50 A, -di/dt = 3 A/ms 100 24 mC A RthJC per per per per 5 6 1 4 4: PGAV = 0.5 W 5: PGM = IGD, TVJ = 125°C TVJ = 25°C; VD = 6 V; RGK = ¥ dS dA a 1: IGT, TVJ = 125°C mA IH RthJK 10 0.1 100 101 5W 6: PGM = 10 W 102 103 IG mA 104 Fig. 1 Gate trigger characteristics thyristor/diode; DC current module thyristor/diode; DC current module other values see Fig. 8/9 Creepage distance on surface Strike distance through air Maximum allowable acceleration 1000 0.45 0.225 0.65 0.325 K/W K/W K/W K/W 12.7 9.6 50 mm mm m/s2 TVJ = 25°C µs tgd typ. 100 Limit 10 Optional accessories for module-type MCC 56 version 1 B Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 200R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1 1 10 mA 100 1000 IG Fig. 2 Gate trigger delay time Dimensions in mm (1 mm = 0.0394") MCC / MCD / MDC Version 1 B MCC Version 8 B MCD Version 8 B Version 1 or 8 without B in typ designation = without insert in mountig holes © 2000 IXYS All rights reserved 2-4 MDC 56 Fig. 3 Surge overload current ITSM, IFSM: Crest value, t: duration Fig. 4 òi2dt versus time (1-10 ms) MCC 56 MCD 56 Fig. 4a Maximum forward current at case temperature Fig. 5 Power dissipation versus onstate current and ambient temperature (per thyristor or diode) Fig. 6 Three phase rectifier bridge: Power dissipation versus direct output current and ambient temperature © 2000 IXYS All rights reserved 3-4 MDC 56 MCC 56 MCD 56 Fig. 7 Three phase AC-controller: Power dissipation versus RMS output current and ambient temperature Fig. 8 Transient thermal impedance junction to case (per thyristor or diode) RthJC for various conduction angles d: d RthJC (K/W) DC 180° 120° 60° 30° 0.45 0.47 0.49 0.505 0.52 Constants for ZthJC calculation: i 1 2 3 Rthi (K/W) ti (s) 0.014 0.026 0.41 0.015 0.0095 0.175 Fig. 9 Transient thermal impedance junction to heatsink (per thyristor or diode) RthJK for various conduction angles d: d DC 180° 120° 60° 30° RthJK (K/W) 0.65 0.67 0.69 0.705 0.72 Constants for ZthJK calculation: i 1 2 3 4 © 2000 IXYS All rights reserved Rthi (K/W) ti (s) 0.014 0.026 0.41 0.2 0.015 0.0095 0.175 0.67 4-4