MCC 72 MCD 72 Thyristor Modules Thyristor/Diode Modules ITRMS = 2x180 A ITAVM = 2x115 A VRRM = 800-1800 V VRSM VRRM TO-240 AA VDSM VDRM V V 900 1300 1500 1700 1900 800 1200 1400 1600 1800 Type 1 MCC 72-08 MCC 72-12 MCC 72-14 MCC 72-16 MCC 72-18 1B io1 B / io8 B io1 B / io8 B io1 B / io8 B io1 B / io8 B io1 B / io8 B Conditions ITRMS, IFRMS ITAVM, IFAVM TVJ = TVJM TC = 63°C; 180° sine TC = 85°C; 180° sine ITSM, IFSM TVJ = 45°C VR = 0 (di/dt)cr 8B Version 1B MCD 72-08 MCD 72-12 MCD 72-14 MCD 72-16 MCD 72-18 A A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1700 1800 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1540 1640 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 14 450 13 500 A2s A2 s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 11 850 11 300 A2 s A2 s 150 A/µs TVJ = TVJM repetitive, IT = 250 A f = 50 Hz; tP =200 µs 3 6 7 1 5 4 2 3 1 5 4 2 1 5 2 1 5 2 MCC Version 1 B MCD Version 1 B 3 6 MCC Version 8 B 3 MCD Version 8 B non repetitive, IT = ITAVM 500 A/µs Features 2 TVJ = TVJM; VDR = /3 VDRM RGK = ∞; method 1 (linear voltage rise) PGM TVJ = TVJM; IT = ITAVM; 1000 tP = 30 µs tP = 300 µs V/µs 10 5 W W PGAV 0.5 W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 °C °C °C 3000 3600 V~ V~ VISOL 50/60 Hz, RMS; IISOL ≤ 1 mA; Md Mounting torque (M5) Terminal connection torque (M5) t = 1 min t=1s 2.5-4.0/22-35 Nm/lb.in. 2.5-4.0/22-35 Nm/lb.in. Typical including screws Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions © 2004 IXYS All rights reserved 5 io1 B / io8 B io1 B / io8 B io1 B / io8 B io1 B / io8 B io1 B / io8 B Maximum Ratings (dv/dt)cr Weight 4 8B 180 115 85 VD = 2/3 VDRM IG = 0.45 A diG/dt = 0.45 A/µs 7 90 g • International standard package, JEDEC TO-240 AA • Direct copper bonded Al2O3 -ceramic base plate • Planar passivated chips • Isolation voltage 3600 V~ • UL registered, E 72873 • Gate-cathode twin pins for version 1B Applications • DC motor control • Softstart AC motor controller • Light, heat and temperature control Advantages • Space and weight savings • Simple mounting with two screws • Improved temperature and power cycling • Reduced protection circuits 419 Version Symbol ∫i2dt 6 3 2 1-4 MCC 72 MCD 72 Symbol Conditions IRRM, IDRM TVJ = TVJM; VR = VRRM; VD = VDRM VT /VF IT /IF = 300 A; TVJ = 25°C 1.74 V VT0 rT For power-loss calculations only (TVJ = 125°C) 0.85 3.2 V mΩ VGT VD = 6 V; IGT VD = 6 V; 2.5 2.6 150 200 V V mA mA VGD IGD TVJ = TVJM; 0.2 10 V mA IL TVJ = 25°C; tP = 10 µs; VD = 6 V IG = 0.45 A; diG/dt = 0.45 A/µs 450 mA IH TVJ = 25°C; VD = 6 V; RGK = ∞ 200 mA tgd TVJ = 25°C; VD = ½ VDRM IG = 0.45 A; diG/dt = 0.45 A/µs 2 µs tq TVJ = TVJM; IT = 150 A, tP = 200 µs; -di/dt = 10 A/µs VR = 100 V; dv/dt = 20 V/µs; VD = 2/3 VDRM typ. 185 µs QS IRM TVJ = TVJM; IT /IF = 50 A, -di/dt = 6 A/µs 170 45 µC A RthJC per per per per 0.3 0.15 0.5 0.25 K/W K/W K/W K/W 12.7 9.6 50 mm mm m/s2 RthJK dS dA a Characteristic Values TVJ TVJ TVJ TVJ 5 = 25°C = -40°C = 25°C = -40°C VD = 2/3 VDRM thyristor/diode; DC current module thyristor/diode; DC current module other values see Fig. 8/9 Creepage distance on surface Strike distance through air Maximum allowable acceleration mA Fig. 1 Gate trigger characteristics Optional accessories for module-type MCC 72 version 1 B Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 200R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1 Fig. 2 Gate trigger delay time Dimensions in mm (1 mm = 0.0394") MCC Version 8 B IXYS reserves the right to change limits, test conditions and dimensions 2-4 MCD Version 8 B 419 MCC / MCD Version 1 B © 2004 IXYS All rights reserved MCC 72 MCD 72 Fig. 3 Surge overload current ITSM, IFSM: Crest value, t: duration Fig. 4 ∫i2dt versus time (1-10 ms) Fig. 4a Maximum forward current at case temperature Fig. 5 Power dissipation versus onstate current and ambient temperature (per thyristor or diode) IXYS reserves the right to change limits, test conditions and dimensions © 2004 IXYS All rights reserved 419 Fig. 6 Three phase rectifier bridge: Power dissipation versus direct output current and ambient temperature 3-4 MCC 72 MCD 72 Fig. 7 Three phase AC-controller: Power dissipation versus RMS output current and ambient temperature Fig. 8 Transient thermal impedance junction to case (per thyristor or diode) RthJC for various conduction angles d: RthJC (K/W) d DC 180° 120° 60° 30° 0.3 0.31 0.33 0.35 0.37 Constants for ZthJC calculation: i 1 2 3 Rthi (K/W) ti (s) 0.008 0.054 0.238 0.0019 0.047 0.3 Fig. 9 Transient thermal impedance junction to heatsink (per thyristor or diode) RthJK for various conduction angles d: RthJK (K/W) d DC 180° 120° 60° 30° 0.5 0.51 0.53 0.55 0.57 Constants for ZthJK calculation: IXYS reserves the right to change limits, test conditions and dimensions 4-4 Rthi (K/W) ti (s) 0.008 0.054 0.238 0.2 0.0019 0.047 0.3 1.25 419 i 1 2 3 4 © 2004 IXYS All rights reserved