T-1 3/4 (5mm) SOLID STATE LAMP PRELIMINARY SPEC Part Number: WP7114RWC/Z WHITE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description The source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. Features z LOW It is recommended to use a wrist band or anti-electrostatic POWER CONSUMPTION. glove when handling the LEDs. z POPULAR T-1 3/4 DIAMETER PACKAGE. All devices, equipment and machinery must be electrically z GENERAL PURPOSE LEADS. grounded. z RELIABLE AND RUGGED. z LONG LIFE - SOLID STATE RELIABILITY. z AVAILABLE ON TAPE AND REEL. Applications z MOISTURE SENSITIVITY LEVEL : LEVEL 1. z Furniture lighting z ELECTROSTATIC z TYP. DISCHARGE THRESHOLD (HBM):1000V. COLOR TEMPERATURE:6500K. z COLOR COORDINATES:X=0.33,Y=0.34 ACC. TO z COLOR z RoHS z Optical indicators z Signal and symbol luminaire z Marker lights (e.g. steps, exit ways, etc.) CIE1931(WHITE). z OPTICAL z Outdoor displays EFFICIENCY: 65.6 lm/W(TYP.) REPRODUCTION INDEX:80. z Lighting for special effects (e.g. starry sky) z Substitute for miniature flashlight COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG9988 REV NO: V.1 DATE: NOV/22/2006 PAGE: 1 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1101019912 Selection Guide Note2 Dice Part No. WP7114RWC/Z WHITE (InGaN) luminous Intensity Iv(mcd) @ 20mA Lens Type WATER CLEAR Note3 Φv (mlm) @ 20mA Viewing Note1 Angle Min. Typ. Typ. 2θ1/2 4700 9500 4200 20° Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 111 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C IF 30 mA IFM 100 mA Rth JA Rth JS 350 130 °C/W °C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥16 mm2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Note1 Note1 Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage Unit 0.33 - 0.34 - 2.7 VF Note2 IF=20mA [Max.] Reverse Current (VR=5V) Value 3.2 3.7 [Typ.] 0.01 IR Reverse Current (VR=5V) V [Max.] 10 μA Temperature coefficient of x IF=20mA, -10°C≤ T≤100°C [Typ.] TC x -0.1 10-3 / °C Temperature coefficient of y IF=20mA, -10°C≤ T≤100°C [Typ.] TCy -0.2 10-3 / °C Temperature coefficient of VF IF=20mA, -10°C≤ T≤100°C [Typ.] TCV -2.5 mV/ °C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ± 0.1V. SPEC NO: DSAG9988 REV NO: V.1 DATE: NOV/22/2006 PAGE: 2 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1101019912 Brightness codes Note1 Note2 luminous Intensity Iv(mcd) @ 20mA Φv (mlm) @ 20mA Code. Min. Max. Typ. ZD 4700 6500 2500 ZE 5700 7500 2900 ZF 6700 8500 3400 ZG 7500 10000 3900 ZH 8000 12000 4500 ZM 10000 16000 5900 ZN 12000 20000 7500 ZP 16000 24000 9500 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White WP7114RWC/Z SPEC NO: DSAG9988 REV NO: V.1 DATE: NOV/22/2006 PAGE: 3 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1101019912 White WP7114RWC/Z SPEC NO: DSAG9988 REV NO: V.1 DATE: NOV/22/2006 PAGE: 4 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1101019912 Color Codes WP7114RWC/Z SPEC NO: DSAG9988 REV NO: V.1 DATE: NOV/22/2006 PAGE: 5 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1101019912 WP7114RWC/Z Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) SPEC NO: DSAG9988 REV NO: V.1 DATE: NOV/22/2006 PAGE: 6 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1101019912 PACKING & LABEL SPECIFICATIONS WP7114RWC/Z SPEC NO: DSAG9988 REV NO: V.1 DATE: NOV/22/2006 PAGE: 7 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1101019912