3.5x2.8mm SMD CHIP LED LAMP AA3528SURC HYPER RED Features Description !SINGLE The Hyper Red source color devices are made COLOR. ! SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. ! AVAILABLE ! IDEAL with DH InGaAlP on GaAs substrate Light Emitting Diode. ON TAPE AND REEL. FOR BACKLIGHTING. ! PACKAGE : 1500PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAA6758 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/27/2003 DRAWN: K.ZHANG PAGE: 1 OF 4 Selection Guide Par t No . Dic e AA3528SURC Iv (m c d ) @ 20 m A L en s Ty p e HYPER RED ( InGaAlP ) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 110 23 0 12 0 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Hyper Red λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un it s Tes t Co n d it io n s 640 nm I F =20mA Hyper Red 6 28 nm I F =20mA Spectral Line Half-width Hyper Red 27 nm I F =20mA C Capacitance Hyper Red 45 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red 1.9 2.5 V I F =20mA IR Reverse Current Hyper Red 10 uA V R = 5V Absolute Maximum Ratings at T)=25°°C P ar am e t e r H y p e r R ed Un it s Power dissipation 170 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAA6758 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/27/2003 DRAWN: K.ZHANG PAGE: 2 OF 4 Hyper Red SPEC NO: DSAA6758 APPROVED: J. Lu AA3528SURC REV NO: V.3 CHECKED: Allen Liu DATE: MAR/27/2003 DRAWN: K.ZHANG PAGE: 3 OF 4 AA3528SURC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAA6758 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/27/2003 DRAWN: K.ZHANG PAGE: 4 OF 4