3.0x1.5 mm SMD CHIP LED LAMP APL3015SURC HYPER RED Features Description !3.0mmx1.5mm SMT LED, 1.4mm THICKNESS. The Hyper Red source color devices are made with !LOW POWER CONSUMPTION. DH InGaAlP on GaAs substrate Light Emitting Diode. !WIDE VIEWING ANGLE. !IDEAL FOR BACKLIGHT AND INDICATOR. ! VARIOUS COLORS AND LENS TYPES AVAILABLE. !INNER LENS TYPE. !PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. SPEC NO: DSAA8946 APPROVED:J.LU REV NO: V.3 CHECKED: Allen Liu DATE:MAR/18/2003 DRAWN: X.T.HU PAGE: 1 OF 4 Selection Guide Par t No . Dic e APL3015SURC Iv (m c d ) @ 20 m A L en s Ty p e HYPER RED ( InGaAlP ) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 110 28 0 70 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Hyper Red λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un it s Tes t Co n d it io n s 640 nm I F =20mA Hyper Red 6 28 nm I F =20mA Spectral Line Half-width Hyper Red 27 nm I F =20mA C Capacitance Hyper Red 45 pF V F =0V;f=1MHz VF Forward Voltage Hyper Red 1.9 2.5 V I F =20mA IR Reverse Current Hyper Red 10 uA V R = 5V Absolute Maximum Ratings at T)=25°°C P ar am e t e r H y p e r R ed Un it s Power dissipation 170 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAA8946 APPROVED:J.LU REV NO: V.3 CHECKED: Allen Liu DATE:MAR/18/2003 DRAWN: X.T.HU PAGE: 2 OF 4 Hyper Red SPEC NO: DSAA8946 APPROVED:J.LU APL3015SURC REV NO: V.3 CHECKED: Allen Liu DATE:MAR/18/2003 DRAWN: X.T.HU PAGE: 3 OF 4 APL3015SURC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAA8946 APPROVED:J.LU REV NO: V.3 CHECKED: Allen Liu DATE:MAR/18/2003 DRAWN: X.T.HU PAGE: 4 OF 4