3.5x2.8mm SURFACE MOUNT LED LAMP AAA3528SURKSYKC HYPER RED SUPER BRIGHT YELLOW Features Description BOTH CHIPS CAN BE CONTROLLED SEPARATELY. The Hyper Red source color devices are made with DH SUITABLE FOR ALL SMT ASSEMBLY AND InGaAlP on GaAs substrate Light Emitting Diode. SOLDER PROCESS. The Super Bright Yellow source color devices are made AVAILABLE ON TAPE AND REEL. with DH InGaAlP on GaAs substrate Light Emitting Diode. PACKAGE: 1500PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subjected to change without notice. SPEC NO: DSAD1242 REV NO: V.3 DATE: APR/05/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000734 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type HYPER RED (InGaAlP) AAA3528SURKSYKC Min. Typ. 70 200 18 100 WATER CLEAR SUPER BRIGHT YELLOW (InGaAlP) Viewing Angle 2θ θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Units Test Conditions 650 590 Max. nm IF=20mA λpeak Peak Wavelength Hyper Red Super Bright Yellow λD Dominant Wavelength Hyper Red Super Bright Yellow 635 590 nm IF=20mA ∆λ1/2 Spectral Line Half-width Hyper Red Super Bright Yellow 28 20 nm IF=20mA C Capacitance Hyper Red Super Bright Yellow 35 20 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red Super Bright Yellow 1.95 2.0 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR= 5V Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Super Bright Yellow Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 175 mA Reverse Voltage 5 Operating/Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1242 REV NO: V.3 DATE: APR/05/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000734 AAA3528SURKSYKC Hyper Red SPEC NO: DSAD1242 REV NO: V.3 DATE: APR/05/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000734 Super Bright Yellow SPEC NO: DSAD1242 REV NO: V.3 DATE: APR/05/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000734 AAA3528SURKSYKC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1242 REV NO: V.3 DATE: APR/05/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000734