5.0mm x 6.0mm FULL COLOR LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAF5060PBESEEVGA BLUE HYPER ORANGE GREEN Features Description ●OUTSTANDING MATERIAL EFFICIENCY. The Blue source color devices are made with InGaN on SiC ●RELIABLE AND RUGGED. Light Emitting Diode. ●WATER CLEAR LENS. The Hyper Orange source color devices are made with ●LOW POWER CONSUMPTION. DH InGaAlP on GaAs substrate Light Emitting Diode. ●ONE BLUE, ONE ORANGE AND ONE GREEN CHIPS IN The Green source color devices are made with InGaN on G-SiC Light Emitting Diode. ONE PACKAGE. ●CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic INCLUDING WHITE LIGHT. ●MOISTURE SENSITIVITY LEVEL : LEVEL 4. glove when handling the LEDs. ●RoHS COMPLIANT. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from package. 4. Specifications are subject to change without notice. SPEC NO: DSAG5858 REV NO: V.1 DATE: JUN/22/2006 PAGE: 1 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002375 Selection Guide Dice Part No. Iv (mcd) [2] @30mA *50mA Lens Type BLUE (InGaN) HYPER ORANGE(InGaAIP) AAF5060PBESEEVGA WATER CLEAR GREEN (InGaN) Min. Typ. 110 250 *650 *1000 180 350 Viewing Angle [1] 2 θ 1/2 100° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. *Luminous intensity with asterisk is measured at 50mA; Luminous intensity / luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue Hyper Orange Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 465 630 520 nm IF=20mA Blue Hyper Orange Green 470 621 525 nm IF=20mA Spectral Line Half-width Blue Hyper Orange Green 25 20 35 nm IF=20mA C Capacitance Blue Hyper Orange Green 110 25 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue Hyper Orange Green 3.7 2.0 3.2 4.3 2.5 4.0 V IF=20mA IR Reverse Current Blue Hyper Orange Green 10 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Power dissipation [1] Hyper Orange Green 350 Units mW DC Forward Current 30 50 50 mA Peak Forward Current [2] 160 195 100 mA 5 5 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [3] 260°C For 3 Seconds Lead Solder Temperature [4] 260°C For 5 Seconds Notes: 1. Within 350mW at all chips are lightened. 2. 1/10 Duty Cycle, 0.1ms Pulse Width. 3. 2mm below package base. 4. 5mm below package base. SPEC NO: DSAG5858 REV NO: V.1 DATE: JUN/22/2006 PAGE: 2 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002375 AAF5060PBESEEVGA Blue SPEC NO: DSAG5858 REV NO: V.1 DATE: JUN/22/2006 PAGE: 3 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002375 Hyper Orange SPEC NO: DSAG5858 REV NO: V.1 DATE: JUN/22/2006 PAGE: 4 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002375 Green SPEC NO: DSAG5858 REV NO: V.1 DATE: JUN/22/2006 PAGE: 5 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002375 PACKING & LABEL SPECIFICATIONS AAF5060PBESEEVGA SPEC NO: DSAG5858 REV NO: V.1 DATE: JUN/22/2006 PAGE: 6 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002375