http://www.fujielectric.com/products/semiconductor/ FGW15N120VD Discrete IGBT Discrete IGBT (High-Speed V series) 1200V / 15A Features Low power loss Low switching surge and noise High reliability, high ruggedness (RBSOA, SCSOA etc.) Applications Inverter for Motor drive AC and DC Servo drive amplifier Uninterruptible power supply Equivalent circuit Maximum Ratings and Characteristics Absolute Maximum Ratings (at TC =25°C unless otherwise specified) Items Collector-Emitter voltage Gate-Emitter voltage DC Collector Current Pulsed Collector Current Turn-Off Safe Operating Area Diode Forward Current Diode Pulsed Current Symbols VCES VGES IC@25 IC@100 ICP IF@25 IF@100 IFP Short Circuit Withstand Time tSC IGBT Max. Power Dissipation FWD Max. Power Dissipation Operating Junction Temperature Storage Temperature PD_IGBT PD_FWD Tj Tstg Characteristics Units Remarks 1200 V ±20 V 28 A TC =25°C, Tj =150°C 15 A TC =100°C, Tj =150°C 30 A Note *1 30 A VCE ≤1200V, Tj ≤175°C 26 A 15 A 30 A Note *1 VCC ≤640V, VGE=15V 10 μs Tj ≤150°C 155 TC =25°C W 95 TC =25°C -40~+175 °C -55~+175 °C Collector Gate Emitter Note *1 : Pulse width limited by Tjmax. Electrical characteristics (at Tj = 25°C unless otherwise specified) Items Symbols Conditions Collector-Emitter Breakdown Voltage V(BR)CES IC = 50μA, VGE = 0V Zero Gate Voltage Collector Current ICES VCE = 1200V, VGE = 0V Gate-Emitter Leakage Current Gate-Emitter Threshold Voltage IGES VGE (th) VCE = 0V, VGE = ±20V VCE = +20V, IC = 15mA Collector-Emitter Saturation Voltage VCE (sat) VGE = +15V, IC = 15A Input Capacitance Output Capacitance Reverse Transfer Capacitance Cies Coes Cres Gate Charge QG Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Energy td(on) tr td(off) tf Eon Turn-Off Energy Eoff Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Energy td(on) tr td(off) tf Eon Turn-Off Energy Eoff Forward Voltage Drop VF Diode Reverse Recovery Time trr1 Diode Reverse Recovery Time trr2 Diode Reverse Recovery Charge Qrr VCE=25V VGE=0V f=1MHz VCC = 600V IC = 15A VGE = 15V Tj = 25°C VCC = 600V IC = 15A VGE = 15V RG = 10Ω L = 500μH Energy loss include “tail” and FWD reverse recovery. Tj = 175°C VCC = 600V IC = 15A VGE = 15V RG = 10Ω L = 500μH Energy loss include “tail” and FWD reverse recovery. Tj =25°C IF=15A Tj =175°C VCC =30V IF = 1.5A -di/dt=200A/µs VCC =600V IF=15A -diF/dt=200A/µs Tj =25°C 1 Tj =25°C Tj =175°C Tj =25°C Tj =175°C Characteristics min. typ. max. 1200 250 2 200 6.0 6.5 7.0 1.85 2.4 2.4 1015 58 47 - Unit V µA mA nA V V pF - 150 - nC - 27 20 180 45 1.1 - - 0.8 - - 28 22 245 75 1.7 - - 1.4 - - 1.7 1.8 2.21 - V V - 56 73 ns - 0.26 - µs - 0.85 - µC ns mJ ns mJ FGW15N120VD Items Discrete IGBT http://www.fujielectric.com/products/semiconductor/ Symbols Diode Reverse Recovery Time trr2 Diode Reverse Recovery Charge Qrr Characteristics min. typ. max. Conditions VCC =600V IF=15A -diF/dt=200A/µs Tj =175°C Thermal resistance Items Symbols Thermal Resistance, Junction-Ambient Thermal Resistance, IGBT Junction to Case Thermal Resistance, FWD Junction to Case Rth(j-a) Rth(j-c)_IGBT Rth(j-c)_FWD 2 min. - Unit - 0.65 - µs - 2.2 - µC Characteristics typ. - max. 50 0.962 1.563 Unit °C/W FGW15N120VD Discrete IGBT http://www.fujielectric.com/products/semiconductor/ Characteristics (Representative) Graph.1 DC Collector Current vs T V ≥+15V, T ≤175ºC Graph.2 Collector Current vs. switching frequency V =+15V, T ≤175ºC, V =600V, D=0.5, R =10Ω, T =100ºC C GE j GE C 50 100 40 80 Switching frequency fs [kHz] Collector current IC [A] G 30 Tj≤175℃ 20 CC C 60 40 20 10 0 0 25 50 75 100 125 150 0 175 5 Case Temperature [°C] 10 15 20 25 30 Collector-Emitter corrent : ICE [A] Graph.3 Typical Output Characteristics (V -I ) T =25ºC CE Graph.4 Typical Output Characteristics (V -I ) T =175ºC C CE j C j 30 30 25 25 VGE= 20V VGE= 20V 15V 15V 20 20 12V 15 IC [A] IC [A] 12V 10V 15 10V 10 10 8V 5 5 8V 0 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0.0 0.5 1.0 1.5 VCE [V] 2.0 2.5 3.0 3.5 4.0 VCE [V] Graph.6 Gate Threshold Voltage vs. T I =15mA, V =20V Graph.5 Typical Transfer Characteristics V =+15V j GE C 30 CE 10 9 Gate Threshold Voltage VGE(th) [V] 25 IC [A] 20 15 10 Tj=175℃ Tj=25℃ 8 typ. max. 7 6 min. 5 4 3 2 5 1 0 0 0 2 4 6 8 10 12 14 -50 -25 0 25 50 75 Tj [℃] VGE [V] 3 100 125 150 175 FGW15N120VD Discrete IGBT http://www.fujielectric.com/products/semiconductor/ Graph.8 Typical Gate Charge V =600V, I =15A, T =25ºC Graph.7 Typical Capacitance V =0V, f=1MHz, T =25ºC GE CC j 4 10 C j 20 Cies 3 10 15 2 10 VGE [V] C [pF] VCC=600V Coes 10 Cres 1 10 5 0 10 0 -2 -1 10 0 10 10 0 150 200 250 300 G j CC CC C GE G 1000 1000 Switching Times [nsec] td(off) tf 100 td(on) 10 tr td(off) tf 100 td(on) tr 10 1 1 0 5 10 15 20 25 30 35 0 10 20 50 60 G C j CC GE 40 Graph.12 Typical switching losses vs. R T =175ºC, V =600V, I =15A, L=500µH V =15V Graph.11 Typical switching losses vs. I T =175ºC, V =600V, L=500µH V =15V, R =10Ω j 30 Gate Resistor Rg [Ω] Collector Current IC [A] CC C GE G 6 4 Switching Energy Losses [mJ] 5 Switching Energy Losses [mJ] Switching Times [nsec] 100 Graph.10 Typical switching time vs. R T =175ºC, V =600V, I =15A, L=500µH V =15V C GE 50 Qg [nC] Graph.9 Typical switching time vs. I T =175ºC, V =600V, L=500µH V =15V,R =10Ω j B 1 10 VCE [V] 4 3 Eon 2 Eoff 3 Eon 2 Eoff 1 1 0 0 0 5 10 15 20 25 30 0 35 Collector Current IC [A] 10 20 30 40 Gate Resistor Rg [Ω] 4 50 60 FGW15N120VD Discrete IGBT http://www.fujielectric.com/products/semiconductor/ Graph.14 Typical reverse recovery characteristics vs. I T =175°C, V =600V, L=500µH, V =15V,R =10Ω Graph.13 FWD Forward voltage drop (V -I ) F F F j CC GE G 8 800 30 20 IF [A] Tj=25℃ Tj=175℃ 15 10 6 600 trr 400 4 Qrr 2 200 5 0 0 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 4.0 10 5 VF [V] 30 IF [A] F j CC GE 25 Graph.16 Reverse biased Safe Operating Area T ≤175°C,V =+15V/0V,R =10Ω Graph.15 Typical reverse recovery loss vs. I T =175°C,V =600V,L=500µH V =15V,R =10Ω j 20 15 GE G G 3.0 50 2.5 2.0 Collector current IC [A] Reverse recovery loss [mJ] 40 1.5 1.0 30 20 10 0.5 0.0 0 0 5 10 15 20 25 0 30 200 400 600 800 1000 Collector-Emitter voltage : VCE [V] IF [A] 5 1200 1400 Reverse Recovery Charge [uC] Reverse recovery Time [nsec] 25 FGW15N120VD Discrete IGBT http://www.fujielectric.com/products/semiconductor/ Graph.17 Transient thermal resistance of IGBT 101 Zth(j-c) [℃/W] 100 10-1 10-2 10-3 10-6 10-5 10-4 10-3 10-2 10-1 100 10-1 100 t [sec] Graph.18 Transient thermal resistance of FWD 101 Zth(j-c) [℃/W] 100 10-1 10-2 10-3 10-6 10-5 10-4 10-3 10-2 t [sec] 6 FGW15N120VD Discrete IGBT http://www.fujielectric.com/products/semiconductor/ Outline Drawings, mm Outview : TO-247 Package ① ② ③ CONNECTION ① GATE ② COLLECTOR ③ EMITTER ① ② DIMENSIONS ARE IN MILLIMETERS. ③ 7 FGW15N120VD Discrete IGBT http://www.fujielectric.com/products/semiconductor/ WARNING 1.This Catalog contains the product specifications, characteristics, data, materials, and structures as of May 2011. The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be sur to obtain the latest specifications. 2.All applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Co., Ltd. is (or shall be deemed) granted. Fuji Electric Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which may arise from the use of the applications described herein. 3.Although Fuji Electric Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your design failsafe, flame retardant, and free of malfunction. 4.The products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has normal reliability requirements. • Computers • OA equipment • Communications equipment (terminal devices) • Measurement equipment • Machine tools • Audiovisual equipment • Electrical home appliances • Personal equipment • Industrial robots etc. 5.If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below, it is imperative to contact Fuji Electric Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment becomes faulty. • Transportation equipment (mounted on cars and ships) • Trunk communications equipment • Traffic-signal control equipment • Gas leakage detectors with an auto-shut-off feature • Emergency equipment for responding to disasters and anti-burglary devices • Safety devices • Medical equipment 6.Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment (without limitation). • Space equipment • Aeronautic equipment • Nuclear control equipment • Submarine repeater equipment 7.Copyright ©1996-2011 by Fuji Electric Co., Ltd. All rights reserved. No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Co., Ltd. 8.If you have any question about any portion in this Catalog, ask Fuji Electric Co., Ltd. or its sales agents before using the product. Neither Fuji Electric Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions set forth herein. 8