〈SMALL-SIGNAL TRANSISTOR〉 ISA1235AC1 ISA1602AM1 FOR LOW FREQUENCY AMPLIFY APPLICATION SILICON PNP EPITAXIAL TYPE DESCRIPTION OUTLINE DRAWING For small type machine low frequency voltage amplify application. 0.9 ③ 0.3 2.0 1.3 0.65 0.65 0.4 ① ② 2.1 0.425 1.25 0.425 0.65 ① ② ③ 0.7 APPLICATION ISA1602AM1 0.13 1.1 ・Small collector to emitter saturation voltage VCE(sat)=-0.3Vmax 2.8 1.5 0.8 ・Excellent linearity of DC forward current gain. 0.65 2.8 1.9 0.95 0.95 FEATURE ISA1235AC1 0.15 ISA1235AC1 ISA1602AM1 is super mini package resin sealed silicon PNP epitaxial type transistor. These are designed for low frequency voltage amplify application . UNIT：mm 0～0.1 0～0.1 JEITA：SC-59 JEDEC：TO-236 resemblance JEITA：SC-70 JEDEC：－ TERMINAL CONNECTOR ①：BASE ②：EMITTER ③：COLLECTOR TERMINAL CONNECTOR ①：BASE ②：EMITTER ③：COLLECTOR MAXIMUM RATINGS（Ta=25℃） Symbol Parameter ＶＣＢＯ ＶＥＢＯ ＶＣＥＯ Ｉ Ｃ ＰＣ Ｔｊ Ｔｓｔｇ Collector to Base voltage Collector to Emitter voltage Emitter to Base voltage Collector current Collector dissipation Junction temperature Storage temperature Ratings ISA1235AC1 ISA1602AM1 -60 -6 -50 -200 200 +150 -55～+150 UNIT MARKING V V V mA mW ℃ ℃ . MF hFE ITEM ELECTRICAL CHARACTERISTICS（Ta=25℃） Symbol Ｖ（ＢＲ）ＣＥＯ Ｉ ＣＢＯ Ｉ EＢＯ ｈＦＥ* ｈＦＥ ＶＣＥ（ｓａｔ） ｆＴ Cob NF Parameter Collector to Emitter Breakdown voltage Collector cut off current Emitter cut off current DC forward current gain DC forward current gain Collector to Emitter saturation voltage Gain bandwidth product Collector output capacitance Noise Figure Test conditions I C=-100μA，RBE=∞ VCB=-60V，I E =0 VEB=-6V，I C =0 VCE=-6V，I C =-1mA VCE=-6V，I C =-0.1mA I C =-100mA，I B =-10mA VCE=-6V，I E =10mA VCB=-6V，I E =0,f=1MHz VCE=-6V，I E =0.3mA， f=100Hz，RG=10kΩ Min -50 － － 150 90 － － － Limits Ave － － － － － － 200 4.0 Max － -0.1 -0.1 500 － -0.3 － － － － 20 ｈFE E 150～300 *：It shows hFE classification in below table. ISAHAYA ELECTRONICS CORPORATION UNIT V μA μA － － V MHz pF dB F 250～500 〈SMALL-SIGNAL TRANSISTOR〉 ISA1235AC1 ISA1602AM1 FOR LOW FREQUENCY AMPLIFY APPLICATION SILICON PNP EPITAXIAL TYPE TYPICAL CHARACTERISTICS COMMON EMITTER OUTPUT COLLECTOR DISSIPATION VS AMBIENT TEMPERATURE -50 250 IB=-0.18mA IB=-0.2mA IB=-0.14mA COLLECTOR DISSIPATION Pc(mW) IB=-0.16mA COLLECTOR CURRENT IC(mA) 200 150 100 50 IB=-0.12mA -40 IB=-0.10mA -30 IB=-0.08mA IB=-0.06mA -20 IB=-0.04mA -10 IB=-0.02mA IB=0mA 0 0 50 100 150 -0 -1 -3 -4 COLLECTOR・EMITTER VOLTAGE VCE(V) COLLECTOR TO EMITTER SATURATION VOLTAGE VS COLLECTOR CURRENT BASE TO EMITTER SATURATION VOLTAGE VS COLLECTOR CURRENT -5 -10.0 BASE TO EMITTER SATURATION VOLTAGE VBE(sat)(V) IC/IB=10 Ta=100℃ Ta=25℃ -100 Ta=-40℃ -10 -0.1 -1 -10 -100 IC/IB=10 Ta=100℃ Ta=25℃ Ta=-40℃ -1.0 -0.1 -0.1 -1000 -1 -10 -100 COLLECTOR CURRENT IC(mA) COLLECTOR CURRENT IC(mA) COMMON EMITTER TRANSFER COMMON EMITTER TRANSFER -1 -1000 -100 VCE=-6V VCE=-6V -0.8 COLLECTOR CURRENT IC(mA) COLLECTOR CURRENT IC(mA) -2 AMBIENT TEMPERATURE Ta(℃) -1000 COLLECTOR TO EMITTER SATURATION VOLTAGE VCE(sat)(mV) -0 Ta=100℃ -0.6 Ta=25℃ -0.4 Ta=-40℃ -0.2 -0 -0 -0.2 -0.4 -0.6 -0.8 BASE TO EMITTER VOLTAGE VBE(V) -1 -80 -60 Ta=100℃ -40 Ta=25℃ Ta=-40℃ -20 -0 -0 -0.2 -0.4 -0.6 -0.8 BASE TO EMITTER VOLTAGE VBE(V) ISAHAYA ELECTRONICS CORPORATION -1 〈SMALL-SIGNAL TRANSISTOR〉 ISA1235AC1 ISA1602AM1 FOR LOW FREQUENCY AMPLIFY APPLICATION SILICON PNP EPITAXIAL TYPE DC FORWARD CURRENT GAIN VS COLLECTOR CURRENT GAIN BAND WIDTH PRODUCT VS. EMITTER CURRENT -10000 400 VCE=-6V GAIN BAND WIDTH PRODUCT fT[MHz] DC FORWARD CURRENT GAIN hFE(-) VCE=-6V Ta=-40℃ Ta=25℃ Ta=100℃ -1000 -100 -10 -0.1 300 200 100 0 -1 -10 -100 -1000 0.1 1 EMITTER CURRENT IE[mA] COLLECTOR CURRENT IC(mA) COLLECTOR OUTPUT CAPACITANCE VS COLLECTOR TO BASE VOLTAGE EMITTER INPUT CAPACITANCE VS EMITTER TO BASE VOLTAGE COLLECTOR OUTPUT CAPACITANCE Cob(pF) EMITTER INPUT CAPACITANCE Cib(pF) 100 Ta=25℃ f=1MHz 10 Cib Cob 1 0.1 1 10 10 100 COLLECTOR TO BASE VOLTAGE VCB(V) EMITTER TO BASE VOLTAGE VEB(V) ISAHAYA ELECTRONICS CORPORATION 100 〈SMALL-SIGNAL TRANSISTOR〉 ISA1235AC1 ISA1602AM1 FOR LOW FREQUENCY AMPLIFY APPLICATION SILICON PNP EPITAXIAL TYPE COMMON EMITTER ｈ PARAMETER（TYPICAL VALUE） Symbol Parameter hie Closed loop small signal input impedance hre Open loop small signal reverse voltage amplification factor hfe Closed loop small signal forward current amplification factor hoe Open loop small signal output admitance Test conditions Ta=25℃ VCE=-6V IE=1mA f=270Hz ISAHAYA ELECTRONICS CORPORATION Limits Unit 7.0 kΩ 0.1 ×10-3 250 － 18 μs 6-41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan Keep safety first in your circuit designs! ·ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (1) placement of substitutive, auxiliary, (2) use of non-farmable material or (3) prevention against any malfunction or mishap. Notes regarding these materials ·These materials are intended as a reference to our customers in the selection of the ISAHAYA products best suited to the customer’s application; they don't convey any license under any intellectual property rights, or any other rights, belonging ISAHAYA or third party. ·ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights , originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials. ·All information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, and are subject to change by ISAHAYA Electronics Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for the latest product information before purchasing product listed herein. ·ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact ISAHAYA electronics corporation or an authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific purposes , such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. ·The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these materials. ·If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or re-export contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. ·Please contact ISAHAYA Electronics Corporation or authorized ISAHAYA products distributor for further details on these materials or the products contained therein. Jul.2013