75 Ohm SMB Plug Right Angle Connector Crimp/ Solder Attachment For RG180, RG195 TECHNICAL DATA SHEET PE4161 75 Ohm SMB Plug Right Angle Connector Crimp/Solder Attachment For RG180, RG195 Configuration Connector Connector Specification Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SMB Plug MIL-C-39012 RG180,RG195 Crimp/Solder Right Angle Electrical Specifications Impedance, Ohms 75 Mechanical Specifications Temperature Operating Range, deg C -65 to +165 Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 0.69 [17.53] 0.38 [9.65] 0.78 [19.81] Weight, lbs [g] 0.013 [5.9] Connector Type Contact Material and Plating Contact Plating Specification Body Material and Plating Body Plating Specification Dielectric Type SMB Plug Gold MIL-G-45204 Brass, Gold MIL-G-45204 Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm SMB Plug Right Angle Connector Crimp/Solder Attachment For RG180, RG195 PE4161 PE4161 REV 1 75 Ohm SMB Plug Right Angle Connector Crimp/ Solder Attachment For RG180, RG195 TECHNICAL DATA SHEET PE4161 Plotted and Other Data Notes: Values at 25 °C, sea level 75 Ohm SMB Plug Right Angle Connector Crimp/Solder Attachment For RG180, RG195 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm SMB Plug Right Angle Connector Crimp/Solder Attachment For RG180, RG195 PE4161 URL: http://www.pasternack.com/smb-plug-standard-rg180-rg195-connector-pe4161-p.aspx PE4161 REV 2 © 2013 Pasternack Enterprises All Rights Reserved PE4161 REV FERRULE: .178" HEX CRIMP TOOL CRIMP SIZE REQUIRED 3. CRIMP FERRULE & PRESS CAP DOWN. 2. INSTALL CABLE INTO BODY OF CONNECTOR AND SOFT SOLDER CENTER CONDUCTOR IN PLACE. 1. STRIP CABLE AS SHOWN & SLIDE FERRULE OVER CABLE. ASSEMBLY PROCEDURES REV. A CAD FILE 021508 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4161 DWG TITLE 75 Ohm SMB Plug Right Angle Connector Crimp/Solder Attachment For RG180, RG195 PE4161 CAD Drawing 3