75 Ohm SMB Positive Snap Plug Right Angle Connector Crimp/Solder Attachment For RG179, RG187 TECHNICAL DATA SHEET PE44445 75 Ohm SMB Positive Snap Plug Right Angle Connector Crimp/Solder Attachment For RG179, RG187 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SMB Positive Snap Plug RG179,RG187 Crimp/Solder Right Angle Electrical Specifications Impedance, Ohms 75 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 0.875 [22.23] 0.4 [10.16] 0.78 [19.81] Weight, lbs [g] 0.027 [12.25] Connector Type Contact Material and Plating Body Material and Plating Dielectric Type SMB Positive Snap Plug Gold Brass, Nickel PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level 75 Ohm SMB Positive Snap Plug Right Angle Connector Crimp/Solder Attachment For RG179, RG187 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm SMB Positive Snap Plug Right Angle Connector Crimp/Solder Attachment For RG179, RG187 PE44445 URL: http://www.pasternack.com/smb-positive-snap-plug-standard-rg179-rg187-connector-pe44445-p.aspx PE44445 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved PE44445 REV 01 INSTALL CABLE INTO BODY OF CONNECTOR AND SOFT SOLDER CENTER CONDUCTOR IN PLACE. CRIMP FERRULE & PRESS CAP DOWN. 2. 3. FERRULE: .128" HEX CRIMP TOOL CRIMP SIZE REQUIRED STRIP CABLE AS SHOWN & SLIDE FERRULE OVER CABLE. 1. ASSEMBLY PROCEDURES FSCM NO. 53919 PE44445 DWG TITLE CAD FILE 092804 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. 75 Ohm SMB Positive Snap Plug Right Angle Connector Crimp/Solder Attachment For RG179, RG187 PE44445 CAD Drawing 2