75 Ohm SMB Plug Connector Clamp/Solder Attachment For RG179, RG187 TECHNICAL DATA SHEET PE4257 75 Ohm SMB Plug Connector Clamp/Solder Attachment For RG179, RG187 Configuration Connector Connector Specification Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SMB Plug MIL-C-39012 RG179,RG187 Clamp/Solder Straight Electrical Specifications Impedance, Ohms 75 Mechanical Specifications Temperature Operating Range, deg C -65 to +165 Size Length, in [mm] Width/Dia., in [mm] 0.75 [19.05] 0.362 [9.19] Weight, lbs [g] 0.013 [5.9] Connector Type Contact Material and Plating Contact Plating Specification Body Material and Plating Dielectric Type SMB Plug Gold MIL-G-45204 Brass, Nickel Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level 75 Ohm SMB Plug Connector Clamp/Solder Attachment For RG179, RG187 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm SMB Plug Connector Clamp/Solder Attachment For RG179, RG187 PE4257 URL: http://www.pasternack.com/smb-plug-standard-rg179-rg187-connector-pe4257-p.aspx PE4257 REV 1 © 2013 Pasternack Enterprises All Rights Reserved PE4257 REV 3. SOLDER CONTACT (4) TO CENTER CONDUCTOR THROUGH HOLE IN CONTACT. SLIDE FRONT INSULATOR (5) OVER CONTACT. INSERT CABLE ASSEMBLY INTO BODY & TIGHTEN. 2. SLIDE CONE ASSEMBLY (2) OVER DIELECTRIC & UNDER BRAID. SLIDE REAR INSULATOR (3) OVER CENTER CONDUCTOR RESTING AGAINST CONE ASSEMBLY (2). 1. SLIDE CLAMP NUT (1) OVER CABLE. STRIP CABLE AS SHOWN. DO NOT NICK BRAID & CENTER CONDUCTOR. SLIT JACKET IN 2 PLACES. TIN CENTER CONDUCTOR. ASSEMBLY PROCEDURES REV. - CAD FILE 042309 SCALE N/A SIZE A 2233 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4257 DWG TITLE 75 Ohm SMB Plug Connector Clamp/Solder Attachment For RG179, RG187 PE4257 CAD Drawing 2