LC Male Connector Clamp/Solder Attachment For RG14, RG217 TECHNICAL DATA SHEET PE4563 LC Male Connector Clamp/Solder Attachment For RG14, RG217 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style LC Male RG14,RG217 Clamp/Solder Straight Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 2.81 [71.37] 1.5 [38] Weight, lbs [g] 0.584 [264.9] Connector Type Contact Material and Plating Body Material and Plating Dielectric Type LC Male Silver Brass, Nickel PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level LC Male Connector Clamp/Solder Attachment For RG14, RG217 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: LC Male Connector Clamp/Solder Attachment For RG14, RG217 PE4563 URL: http://www.pasternack.com/lc-male-standard-rg14-rg217-connector-pe4563-p.aspx PE4563 REV 1 © 2013 Pasternack Enterprises All Rights Reserved 2. FORM BRAID OVER CLAMP NUT (4). TRIM BRAID BACK TO SHOULDER. CUT DIELECTRIC & CENTER CONDUCTOR TO DIMENSION SHOWN. DO NOT NICK CENTER CONDUCTOR. SOLDER CONTACT TO CENTER CONDUCTOR. REMOVE EXCESS SOLDER. DO NOT OVER HEAT DIELECTRIC. INSERT CABLE ASSEMBLY INTO BODY & TIGHTEN. 1. SLIDE CLAMP NUT (1), WASHER (2) & GASKET (3) OVER CABLE. STRIP CABLE AS SHOWN. DO NOT NICK BRAID WHILE CUTTING JACKET. TAPER END OF BRAID TO PERMIT ASSEMBLY OF BRAID CLAMP (4). SLIDE BRAID CLAMP (4) OVER BRAID & SEAT AGAINST JACKET. ASSEMBLY PROCEDURES PE4563 REV REV. B CAD FILE 082312 SCALE N/A SIZE A 2233 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4563 DWG TITLE LC Male Connector Clamp/Solder Attachment For RG14, RG217 PE4563 CAD Drawing 2