PASTERNACK PE4273

75 Ohm SMB Jack Connector Clamp/Solder
Attachment For RG180, RG195
TECHNICAL DATA SHEET
PE4273
75 Ohm SMB Jack Connector Clamp/Solder Attachment For RG180, RG195
Configuration
Connector
Connector Interface Type
Cable Attachment Method (Shield/Contact)
Body Style
SMB Jack
RG180,RG195
Clamp/Solder
Straight
Electrical Specifications
Impedance, Ohms
75
Mechanical Specifications
Size
Length, in [mm]
Width/Dia., in [mm]
0.615 [15.62]
0.344 [8.74]
Weight, lbs [g]
0.013 [5.9]
Connector
Type
Contact Material and Plating Body Material and Plating
Dielectric Type SMB Jack
Gold
Brass, Nickel
Teflon
.
Compliance Certifications (visit www.Pasternack.com for current document)
RoHS Compliant
Yes
Plotted and Other Data
Notes:
Values at 25 °C, sea level
75 Ohm SMB Jack Connector Clamp/Solder Attachment For RG180, RG195 from Pasternack Enterprises has same day
shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and
are part of the broadest selection in the industry.
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 75 Ohm SMB Jack Connector Clamp/Solder Attachment For RG180, RG195 PE4273
URL: http://www.pasternack.com/smb-jack-standard-rg180-rg195-connector-pe4273-p.aspx
PE4273 REV 01
1
© 2013 Pasternack Enterprises All Rights Reserved
PE4273 REV 01
3. SOLDER CONTACT (5) TO CENTER CONDUCTOR. INSERT
CABLE ASSEMBLY INTO BODY & TIGHTEN.
2. SLIDE BRAID CLAMP (3) OVER DIELECTRIC & UNDER
BRAID. PUSH INTO WASHER UNTIL IT STOPS. STRIP
CABLE AS SHOWN IN B. TRIM EXCESS BRAID FLUSH
WITH SURFACE OF COMPRESSION WASHER (2). INSERT
INSULATOR (4) OVER DIELECTRIC WITH CENTER
CONDUCTOR PROTRUDING THROUGH HOLE.
1. SLIDE CLAMP NUT (1) OVER CABLE AS SHOWN IN A.
SLIDE COMPRESSION WASHER (2) OVER BRAID & SEAT
AGAINST JACKET. FLAIR BRAID OVER COMPRESSION
WASHER (2).
ASSEMBLY PROCEDURES
REV. -
CAD FILE
042309
SCALE N/A
SIZE A
2233
NOTES:
1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL.
2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME.
3. DIMENSIONS ARE IN INCHES [mm].
4. FITS MIL-C-17 AND EQUIVALENT CABLES.
FSCM NO. 53919
PE4273
DWG TITLE
75 Ohm SMB Jack Connector Clamp/Solder Attachment For RG180, RG195
PE4273 CAD Drawing
2