RECTRON RC205

RC205
SINGLE-PHASE GLASS PASSIVATED
SILICON BRIDGE RECTIFIER
VOLTAGE 600 Volts CURRENT 2.0 Amperes
FEATURES
*
*
*
*
*
*
Reverse voltage to 600v
Surge overload ratings to 50 amperes peak
Good for printed circuit board assembly
Mounting position: Any
Weight: 1.88 grams
Silver-plated copper leads
RC-2
.374 (9.5)
.354 (9.0)
MECHANICAL DA TA
* UL listed the recognized component directory, file #E94233
* Epoxy: Device has UL flammability classification 94V-O
.290 (7.4)
.270 (6.9)
1.2
(30.5)
MIN.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
POS.
LEAD
1.0
(25.4)
MIN.
.032 (0.8)
.028 (0.7)
o
Ratings at 25 C ambient temperature unless otherwise specified.
.220 (5.6)
.180 (4.6)
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.220 (5.6)
.180 (4.6)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At T A = 25oC unless otherwise noted)
SYMBOL
RATINGS
Volts
420
Volts
VDC
600
Volts
IO
2.0
Amps
I FSM
50
Amps
TJ
-55 to + 150
0
C
T STG
-55 to + 150
0
C
SYMBOL
RC205
UNITS
VF
1.1
Volts
Maximum RMS Bridge Input Voltage
Maximum Average Forward Output Current at T A = 25oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Operating Temperature Range
Storage Temperature Range
UNITS
VRMS
VRRM
Maximum DC Blocking Voltage
RC205
600
Maximum Recurrent Peak Reverse Voltage
ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted)
CHARACTERISTICS
Maximum Forward Voltage Drop per Bridge
Element at 2.0A DC
Maximum Reverse Current at Rated
@T A = 25 oC
DC Blocking Voltage per element
@T A = 125 o C
NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted.
2. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
3. Equivalent to Vishay's GBU6 Series.
IR
5.0
uAmps
0.5
mAmps
2012-11
REV:A
RATING AND CHARACTERISTIC CURVES ( RC205 )
FIG. 2 - TYPICAL FORWARD CURRENT
DERATING CURVE
2.0
60
50
AVERAGE FORWARD CURRENT, (A)
PEAK FORWARD SURGE CURRENT, (A)
FIG. 1 - MAXIMUM FORWARD SURGE CURRENT
8.3ms Single Half Sine-Wave
(JEDED Method)
40
30
20
0
1
2
4 6 8 10
20
40 60
NUMBER OF CYCLES AT 60Hz
1.5
1.0
.5
0
100
60 Hz RESISTIVE OR
INDUCTIVE LOAD
20
INSTANTANEOUS FORWARD CURRENT, (A)
INSTANTANEOUS REVERSE CURRENT, (uA)
6
4
2
TJ = 100
1.0
.6
.4
.2
.1
.06
.04
TJ = 25
.02
.01
0
20
40
60
80 100 120
PERCENT OF RATED PEAK
REVERSE VOLTAGE, (%)
140
80
110 140
170
AMBIENT TEMPERATURE, (
200
)
FIG. 4 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
FIG. 3 - TYPICAL REVERSE CHARACTERISTICS
10
50
20
10
7
5
3
1.0
TJ = 25
Pulse Width = 300us
1% Duty Cycle
.5
.3
.1
.05
.02
.01
0
.2
.4
.6
.8
1.0
1.2
1.4
INSTANTANEOUS FORWARD VOLTAGE, (V)
RECTRON
PACKAGING OF DIODE AND BRIDGE RECTIFIERS
BULK PACK
PACKAGE
RC-2
PACKING CODE
-B
EA PER BOX
600
INNER BOX SIZE
(mm)
165*252*59
CARTON SIZE
(mm)
347*320*271
EA PER CARTON
6,000
GROSS
WEIGHT(Kg)
10.30
RECTRON
Attachment information about RC207
1. Internal Circuit
2. Marking on the body
+
VXXX
Rectron Logo
Plant - code
Part No.
Voltage-code
Week - code
(W:01~52)
Year -code
RC20X
(Last digit of year&
A:2010, B:2011...)
1-------50V
5-------600V
2-------100V
6-------800V
3-------200V
4-------400V
7-----1000V
3. Items marked on the innerbox and carton
3.1 On the box (for–B)
CUSTOMER
TYPE
LOT NO.
QUANTITY
Q.A.
DATE
3.2 On the carton
CUSTOMER
TYPE
QUANTITY
LOT NO.
REMARK
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.