SUD50N04-8m8P N-Channel 40 V (D-S) MOSFET FEATURES PRODUCT SUMMARY RDS(on) (Ω) ID (A)a 0.0088 at VGS = 10 V 50 0.0105 at VGS = 4.5 V 50 VDS (V) 40 Qg (Typ.) 16 nC • Halogen-free According to IEC 61249-2-21 Definition • TrenchFET® Power MOSFET • 100 % UIS Tested • 100 % Rg Tested • PWM Optimized • Compliant to RoHS Directive 2002/95/EC APPLICATIONS • LCD Display Backlight Inverters • DC/DC Converters TO-252 D G Drain Connected to Tab G D S Top View S Ordering Information: SUD50N04-8m8P-4GE3 (Lead (Pb)-free and Halogen-free) N-Channel MOSFET ABSOLUTE MAXIMUM RATINGS TA = 25 °C, unless otherwise noted Parameter Symbol VDS VGS Drain-Source Voltage Gate-Source Voltage Continuous Drain Current (TJ = 150 °C) TC = 25 °C TC = 70 °C TA = 25 °C TA = 70 °C ID TC = 25 °C TA = 25 °C IS Single Pulse Avalanche Current Avalanche Energy L = 0.1 mH IAS EAS Maximum Power Dissipation TC = 25 °C TC = 70 °C TA = 25 °C TA = 70 °C PD Continuous Source-Drain Diode Current 40 ± 20 V 14b 11.2b 100 40 A 2.6b 30 45 48.1 30.8 mJ W 3.1b 2.0b - 55 to 150 TJ, Tstg Operating Junction and Storage Temperature Range Unit 50a 44 IDM Pulsed Drain Current Limit °C THERMAL RESISTANCE RATINGS Parameter Maximum Steady State Symbol RthJA Typical Maximum Junction-to-Ambientb 32 40 Maximum Junction-to-Case Steady State RthJC 2.1 2.6 Notes: a. Package limited. b. Surface mounted on 1" x 1" FR4 board. 1/9 www.freescale.net.cn Unit °C/W SUD50N04-8m8P N-Channel 40 V (D-S) MOSFET SPECIFICATIONS TJ = 25 °C, unless otherwise noted Parameter Symbol Test Conditions Min. VDS VGS = 0 V, ID = 250 µA 40 Typ. Max. Unit Static Drain-Source Breakdown Voltage VDS Temperature Coefficient ΔVDS/TJ VGS(th) Temperature Coefficient ΔVGS(th)/TJ Gate-Source Threshold Voltage ID = 1.0 mA VGS(th) VDS = VGS, ID = 250 µA Gate-Source Leakage IGSS VDS = 0 V, VGS = ± 20 V Zero Gate Voltage Drain Current IDSS On-State Drain Currenta ID(on) Drain-Source On-State Resistancea Forward Transconductancea gfs mV/°C - 5.9 1.5 3.0 V ± 100 nA VDS = 40 V, VGS = 0 V 1 VDS = 40 V, VGS = 0 V, TJ = 70 °C 20 VDS ≥ 5 V, VGS = 10 V RDS(on) V 44 50 µA A VGS = 10 V, ID = 20 A 0.0069 0.0088 VGS = 4.5 V, ID = 15 A 0.0084 0.0105 VDS = 15 V, ID = 15 A 75 Ω S Dynamicb Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd Gate Resistance Rg Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time 2400 VDS = 20 V, VGS = 0 V, f = 1 MHz 260 pF 100 VDS = 20 V, VGS = 10 V, ID = 20 A VDS = 20 V, VGS = 4.5 V, ID = 20 A 37 56 16 24 6.5 nC 4.5 f = 1 MHz td(on) VDD = 20 V, RL = 1 Ω ID ≅ 20 A, VGEN = 4.5 V, Rg = 1 Ω tr td(off) 2.5 5.5 8.5 30 45 15 25 45 70 tf 15 25 td(on) 9 15 VDD = 20 V, RL = 1 Ω ID ≅ 20 A, VGEN = 10 V, Rg = 1 Ω tr td(off) tf 5 10 40 60 5 10 Ω ns Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current TC = 25 °C IS Pulse Diode Forward Currenta ISM Body Diode Voltage VSD Body Diode Reverse Recovery Time trr Body Diode Reverse Recovery Charge Qrr Reverse Recovery Fall Time ta Reverse Recovery Rise Time tb 40 100 IS = 10 A IF = 20 A, dI/dt = 100 A/µs, TJ = 25 °C A 0.81 1.2 V 22 35 ns 14 25 nC 11 11 ns Notes: a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 %. b. Guaranteed by design, not subject to production testing. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2/9 www.freescale.net.cn SUD50N04-8m8P N-Channel 40 V (D-S) MOSFET TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 100 100 VGS = 10 V thru 5 V VGS = 4 V 80 I D - Drain Current (A) I D - Drain Current (A) 80 60 40 20 TC = 25 °C TC = 125 °C TC = - 55 °C 0 0.5 1.0 1.5 2.0 2.5 0 1 2 3 4 VDS - Drain-to-Source Voltage (V) VGS - Gate-to-Source Voltage (V) Output Characteristics Transfer Characteristics 5 0.012 1.5 R DS(on) - On-Resistance (Ω) 1.2 I D - Drain Current (A) 40 20 VGS = 3 V 0 0.0 60 0.9 0.6 TC = 25 °C 0.010 VGS = 4.5 V 0.008 VGS = 10 V 0.006 0.3 TC = 125 °C TC = - 55 °C 0.004 0.0 0 1 2 3 4 0 5 60 80 ID - Drain Current (A) Transfer Characteristics On-Resistance vs. Drain Current 100 10 ID = 20 A VGS - Gate-to-Source Voltage (V) Ciss 2400 C - Capacitance (pF) 40 VGS - Gate-to-Source Voltage (V) 3200 1600 800 Coss Crss 0 0 VDS = 10 V 8 VDS = 20 V 6 VDS = 30 V 4 2 0 5 10 15 VDS - Drain-to-Source Voltage (V) Capacitance 3/9 20 20 0 10 20 30 Qg - Total Gate Charge (nC) Gate Charge www.freescale.net.cn 40 SUD50N04-8m8P N-Channel 40 V (D-S) MOSFET TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 100 2.0 TJ = 25 °C ID = 20 A VGS = 10 V 10 1.4 VGS = 4.5 V 1.1 I S - Source Current (A) (Normalized) R DS(on) - On-Resistance 1.7 1 TJ = 150 °C 0.1 TJ = - 55 °C 0.8 0.01 0.5 - 50 - 25 0 25 50 75 100 125 0.001 0.0 150 0.2 0.4 0.6 0.8 1.0 1.2 TJ - Junction Temperature (°C) VSD - Source-to-Drain Voltage (V) On-Resistance vs. Junction Temperature Source-Drain Diode Forward Voltage 0.6 0.030 0.025 VGS(th) Variance (V) 0.2 0.020 0.015 TJ = 125 °C - 0.2 ID = 1 mA - 0.6 0.010 ID = 250 µA TJ = 25 °C 0.005 0 2 4 6 8 - 1.0 - 50 10 - 25 0 25 50 75 100 125 150 TJ - Temperature (°C) VGS - Gate-to-Source Voltage (V) Threshold Voltage On-Resistance vs. Gate-to-Source Voltage 500 1000 400 100 I D - Drain Current (A) Limited by RDS(on)* Power (W) R DS(on) - On-Resistance (Ω) ID = 7.2 A 300 200 TA = 25 °C 0 0.0001 0.001 0.01 0.1 1 Time (s) Single Pulse, Junction-to-Ambient 4/9 100 µs 10 10 1 ms 10 ms, 100 ms, DC 1 0.1 100 10 µs 0.01 0.1 TC = 25 °C Single Pulse BVDSS 1 10 100 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified Safe Operating Area, Junction-to-Case www.freescale.net.cn SUD50N04-8m8P N-Channel 40 V (D-S) MOSFET TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 60 I D - Drain Current (A) 45 Package Limited 30 15 0 0 25 50 75 100 125 150 TC - Case Temperature (°C) Current Derating*, Junction-to-Case 4.0 70 3.5 60 50 2.5 Power (W) Power (W) 3.0 2.0 40 30 1.5 20 1.0 10 0.5 0.0 0 0 25 50 75 100 125 TJ - Junction Temperature (°C) Power Derating, Junction-to-Ambient 150 0 25 50 75 100 125 150 TJ - Junction Temperature (°C) Power Derating, Junction-to-Case * The power dissipation PD is based on TJ(max) = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit. 5/9 www.freescale.net.cn SUD50N04-8m8P N-Channel 40 V (D-S) MOSFET TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 Notes: 0.1 PDM 0.05 t1 t2 1. Duty Cycle, D = 0.02 t1 t2 2. Per Unit Base = RthJA = 80 °C/W 3. TJM - T A = PDMZthJA(t) Single Pulse 4. Surface Mounted 0.01 10 -4 10 -3 10 -2 10 -1 1 Square Wave Pulse Duration (s) 100 10 1000 Normalized Thermal Transient Impedance, Junction-to-Ambient 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 0.05 0.1 0.02 Single Pulse 0.01 10 -4 10 -3 10 -2 10 -1 1 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Case 6/9 www.freescale.net.cn 10 SUD50N04-8m8P N-Channel 40 V (D-S) MOSFET TO-252AA CASE OUTLINE E A MILLIMETERS C1 e b1 D1 e1 E1 L gage plane height (0.5 mm) L1 b L3 H D L2 b2 C A2 A1 INCHES DIM. MIN. MAX. MIN. MAX. A 2.21 2.38 0.087 0.094 A1 0.89 1.14 0.035 0.045 A2 0.030 0.127 0.001 0.005 b 0.71 0.88 0.028 0.035 b1 0.76 1.14 0.030 0.045 b2 5.23 5.44 0.206 0.214 C 0.46 0.58 0.018 0.023 C1 0.46 0.58 0.018 0.023 D 5.97 6.22 0.235 0.245 D1 4.10 4.45 0.161 0.175 E 6.48 6.73 0.255 0.265 E1 4.49 5.50 0.177 0.217 e e1 2.28 BSC 4.57 BSC 0.090 BSC 0.180 BSC H 9.65 10.41 0.380 L 1.40 1.78 0.055 0.070 L1 0.64 1.02 0.025 0.040 L2 0.89 1.27 0.035 0.050 L3 1.15 1.52 0.040 0.060 ECN: T11-0110-Rev. L, 18-Apr-11 DWG: 5347 Note • Dimension L3 is for reference only. 7/9 www.freescale.net.cn 0.410 SUD50N04-8m8P N-Channel 40 V (D-S) MOSFET RECOMMENDED MINIMUM PADS FOR DPAK (TO-252) 0.224 0.243 0.087 (2.202) 0.090 (2.286) (10.668) 0.420 (6.180) (5.690) 0.180 0.055 (4.572) (1.397) Recommended Minimum Pads Dimensions in Inches/(mm) Return to Index 8/9 Return to Index www.freescale.net.cn SUD50N04-8m8P N-Channel 40 V (D-S) MOSFET Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. freestyle Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on it s or their behalf (collectively, “freestyle”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. freestyle makes no warranty, representation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain type s of applications are based on freestyle’s knowledge of typical requirements that are often placed on freestyle products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsib ility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify freestyle’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, freestyle products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the freestyle product could result in personal injury or death. Customers using or selling freestyle products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold freestyle and its distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vis hay Material Category Policy freestyle Intertechnology, Inc. hereby certi fies that all its products that are id entified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwis e specified as non-compliant. Please note that some freestyle documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002 /95/EC conform to Directive 2011/65/EU. 9/9 www.freescale.net.cn