SPD5711 and SPD5712 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 33 - 75 mA SCHOTTKY SMALL SIGNAL DIODE Designer’s Data Sheet Part Number/Ordering Information 1/ SPD5711 SPD5712 16 – 50 VOLTS __ __ __ │ │ │ │ │ │ │ │ └ │ └ Screening 2/ __ = Not Screened │ TX = TX Level │ TXV = TXV Level │ S = S Level │ └ Package __ = Axial SMS = Square Tab Surface Mount Family/Rating SPD5711 = 50V, 33mA SPD5712 = 16V, 75mA Features: • • • • Extremely Low Turn On Voltage Ultra Fast Switching Hermetically Sealed Replacement for 1N5711 and 1N5712 with Improved Thermal Resistance Primary Intended for High Level UHF/VHF Detection and Pulse Applications with a Broad Dynamic Range Axial or Square Tab Surface Mount Versions Available 2/ TX, TXV, and S-Level Screening Available • • Maximum Ratings 3/ Symbol Value Units Peak Repetitive Reverse and DC Blocking Voltage SPD5711 SPD5712 VRRM VRWM VR 70 20 Volts Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TC = 25 °C) SPD5711 SPD5712 IO 33 75 mAmps T OP & TSTG -65 to+150 °C R0JL R0JE 250 200 ºC/W Operating & Storage Temperature Maximum Thermal Resistance, Junction to Lead, L = 3/8” (Axial) Junction to End Tab (SMS) Notes: 1/ For ordering information, price, operating curves, and availability- Contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Maximum ratings and electrical characteristics @ 25°C unless otherwise specified. Axial Package: NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Square Tab Surface Mount (SMS) Package: DATA SHEET #: RS0008E DOC SPD5711 and SPD5712 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics 3/ Symbol Blocking Reverse Voltage (IR = 10 μA, TA = 25°C, 300 – 500 μs Pulse) IF = 1 mADC IF = 15 mADC IF = 35 mADC Instantaneous Forward Voltage Drop (TA = 25°C, 300 – 500 μs Pulse) IF = 1 mADC IF = 15 mADC IF = 35 mADC Instantaneous Forward Voltage Drop (TA = -55 ºC, 300 – 500 μs Pulse) Reverse Leakage Current (TA = 25 ºC, 300 μs Minimum Pulse) Reverse Leakage Current SPD5711: Vr = 50V SPD5712: Vr = 16V (TA = 100 ºC, VR = Rated, 300 μs Minimum Pulse) Junction Capacitance (VR = 0 VDC, VSIG = 50 mVPK, TA = 25ºC, f = 1MHz) SPD5711 Min Max SPD5712 Min Max Units VBR 70 –– 20 –– VF1 VF2 VF3 VF4 VF5 VF6 –– –– –– –– –– –– –– 0.41 1.0 –– 0.55 1.0 –– 200 –– –– –– –– –– –– –– 0.41 –– 1.0 0.55 –– 1.0 150 IR2 –– 200 –– 150 μA CJ –– 2.0 –– 2.0 pF IR1 VDC VDC VDC nA Axial Case Outline: DIMENSIONS Note: Lead Diameter is not controlled within 0.050” of the diode body. DIM MIN. MAX. A 0.068” 0.076” B 0.150” 0.170” C 1.00” 1.50” D 0.014” 0.022” Square Tab Surface Mount (SMS) Case Outline: DIMENSIONS NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DIM MIN. A 0.080” B 0.205” C 0.22” 0.28” D 0.001” --- DATA SHEET #: RS0008E MAX. 0.095 ” 0.220 ” DOC