SEMICONDUCTORS BUV26 – BUV26A SILICON POWER TRANSISTORS High-speed,NPN power transistors in a TO-220 envelope. They are intended for fast switching applications such as high frequency and efficiency converters, switching regulators and motor control. Compliance to RoHS. ABSOLUTE MAXIMUM RATINGS Value Symbol Ratings Unit BUV26 BUV26A VCBO Collector-Base Voltage IE = 0 180 200 V VCEO Collector-Emitter Voltage IB = 0 90 100 V VEBO Emitter-Base Voltage IC = 0 7 5 V IC Collector Current ICM Collector Peak Current IB Base Current IBM Base Current Pt Power Dissipation Tj Junction Temperature Tstg Storage Temperature range tp = 10ms tp = 10ms 14 A 25 A 4 A 6 A 85 65 W 150 °C -65 to 150 Limiting values in accordance with the Absolute Maximum System (IEC 134) THERMAL CHARACTERISTICS Symbol RthJ-mb 29/09/2012 Ratings From junction to mounting base BUV26 BUV26A COMSET SEMICONDUCTORS Value Unit 1.76 °C/W 1|3 SEMICONDUCTORS BUV26 – BUV26A ELECTRICAL CHARACTERISTICS TC=25°C unless otherwise noted Value Symbol ICEX IEBO VCE0sust Ratings Collector Cutoff Current (*) Emitter Cutoff Current Collector-Emitter Sustaining Voltage VCE(SAT) Collector-Emitter saturation Voltage VBE(SAT) Base-Emitter Saturation Voltage Test Condition(s) BUV26 VCE =VCESMax VBE= 1.5V, TJ= 125°C BUV26A BUV26 VEB= 5 V, IC= 0 BUV26A BUV26 IB= 0 , IC= 0.2 A L = 25 mH BUV26A BUV26 IC= 6 A, IB= 600 mA IC= 5 A, IB= 500 mA BUV26A IC=12 A, IB= 1.2 A BUV26 IC=10 A, IB= 1 A BUV26A IC= 6 A, IB= 600 mA BUV26 IC= 5 A, IB= 500 mA BUV26A IC=12 A, IB= 1.2 A BUV26 IC=10 A, IB= 1 A BUV26A Unit Min Typ Max - - 1 mA - - 1 mA 90 100 - - 0.6 0.5 1.5 1 1.2 1.2 2 1.5 V V V SWITCHING TIMES Symbol Ratings ton turn-on time toff turn-off time tf Fall time Value Test Condition(s) For BUV26 IC= 12 A , VCC= 50 V IB1 = 1.2 A , IB2 = 2 A For BUV26A IC= 10 A , VCC= 50 V IB1 = 1 A , IB2 = 2 A BUV26 BUV26A BUV26 BUV26A BUV26 BUV26A Unit Min Typ Max - 0.4 0.8 - 0.5 1.2 - 0.12 0.4 (*) Mesured with a half-sinewave voltage (curve tracer). 29/09/2012 COMSET SEMICONDUCTORS 2|3 µs SEMICONDUCTORS BUV26 – BUV26A MECHANICAL DATA CASE TO-220 DIMENSIONS (mm) Min. A B C D E F G H L M N P R S T U 9,90 15,65 13,20 6,45 4,30 2,70 2,60 15,75 1,15 3,50 0,46 2,50 4,98 2.49 0,70 Pin 1 : Pin 2 : Pin 3 : Package Max. 10,30 15,90 13,40 6,65 4,50 3,15 3,00 17.15 1,40 3,70 1,37 0,55 2,70 5,08 2.54 0,90 Base Collector Emitter Collector Revised August 2012 Information furnished is believed to be accurate and reliable. However, Comset Semiconductors assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. Data are subject to change without notice. Comset Semiconductors makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Comset Semiconductors assume any liability arising out of the application or use of any product and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Comset Semiconductors’ products are not authorized for use as critical components in life support devices or systems. www.comsetsemi.com 29/09/2012 [email protected] COMSET SEMICONDUCTORS 3|3