D4KB05 thru D4KB10 GLASS PASSIVATED REVERSE VOLTAGE FORWARD CURRENT BRIDGE RECTIFIERS - 50 to 1000Volts - 4.0 Amperes D3K FEATURES ● Glass passivated chip junction .057(1.45) R2 ● High case dielectric strength .130(3.3) .114(2.9) .110(2.8) .094(2.4) .555(14.1) .531(13.5) ● Terminal:Plated leads solderable per MIL-STD 202E, Method 208C ● Case:UL-94 Class V-0 recognized Flane Retardant Epoxy .055(1.4) .039(1.0) .024 (0.6) .484(12.3) .461(11.7) .055(1.4) .047(1.2) MACHANICAL DATA .276(7.0) .252(6.4) .484(12.3) .461(11.7) .437(11.1) .413(10.5) ldeal for printed circuit board .134 .122 (3.4) (3.1) ● High surge current capability .059(1.5) .043(1.1) .094(2.4) .071(1.8) .049(1.25) .041(1.05) .034(0.86) .026(0.66) ● Polarity:Polarity symbol marked on body ● Mounting position:any .024(0.6) .016(0.4) .162 .162 .162 .138 .138 .138 (4.11)(4.11)(4.11) (3.51)(3.51)(3.51) 1 2 3 4 1 + 2 3 ~ ~ 4 - Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOL D4KB05 D4KB1 D4KB2 D4KB4 D4KB6 D4KB8 D4KB10 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Output Current I(AV) 4 A IFSM 135 A VF 1.1 V 2 It 64.84 A2s without heatsink RθJa 55 with heatsink RθJC 1.5 without heatsink RθJL @ TC=138℃ (with heatsink) Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage at 4.0A DC 2 I t Rating for Fusing (t<8.3ms) Typical Thermal Resistance Maximum DC Reverse Current @ Ta =25℃ at Rated DC Blocking Voltage @ Ta =125℃ Operating Temperature Range Storage Temperature Range ℃/W 15 10.0 IR 500 μA TJ -55 to +150 ℃ TSTG -55 to +150 ℃ REV. 1, 30-Dec-2011 ~ 554 ~ RATING AND CHARACTERTIC CURVES D4KB05 thru D4KB10 FIG.1-DERATING CURVE OUTPUT RECTIFIED CURRENT FIG.2-MAXIMUM NON-REPETITIVE SURGE CURRENT 180 5.0 4.0 3.0 2.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 1.0 0.0 0.1 0 20 40 60 80 100 120 140 150 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES 6.0 160 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 120 80 40 0 1 CASE TEMPERATURE, °C 10 5 2 20 50 100 NUMBER OF CYCLETS AT 60Hz FIG.3-TYPICAL FORWARD CHARACTERISTICS FIG.3-TYPICAL JUNCTION CAPACITANCE 20.0 100 Pulse Width = 300μs 1% Duty Cycle INSTANTANEOUS FORWARD CURRENT, AMPERES 10 T J=25°C,f=1MHZ 1.0 1.0 10.0 T C=125°C 1.0 0.1 T C=25°C 0.01 100 0 REVERSE VOLTAGE,VOLTS 0.2 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE. VOLTS FIG.5-TYPICAL REVERSE CHARACTERISTICS 100.0 INSTANTANEOUS REVERSE CURRENT ,(uA) CAPACITANCE,(pF) 10.0 T J=150°C 10.0 T J=125°C 1.0 0.1 T J=25°C 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) REV. 1, 30-Dec-2011 ~ 555 ~