2SA2112 Ordering number : EN7379A SANYO Semiconductors DATA SHEET 2SA2112 PNP Epitaxial Planar Silicon Transistor High Current Switching Applications Applicaitons • DC-DC converter, relay drivers, lamp drivers, motor drivers, strobes Features • • Adoption of MBIT process Low collector-to-emitter saturation voltage • • Large current capacity High-speed switching Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Conditions Ratings VCBO VCES Collector-to-Emitter Voltage Collector-to-Emitter Voltage VCEO VEBO IC Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Unit --50 V --50 V --50 V --6 V --3 A ICP IB --600 PC Tj 1 W Junction Temperature 150 °C Storage Temperature Tstg --55 to +150 °C Base Current Collector Dissipation --6 Package Dimensions Product & Package Information unit : mm (typ) 7540-001 • Package : NMP(Taping) • JEITA, JEDEC : SC-71 • Minimum Packing Quantity : 2,500 pcs./box 2.5 6.9 2SA2112-AN 1.05 Marking(NMP(Taping)) Electrical Connection 2 A2112 1.0 4.5 1.0 1.45 A mA LOT No. 0.6 3 1.0 0.5 1 15.0 0.9 1 2.54 2 3 0.45 2.54 1 : Emitter 2 : Collector 3 : Base SANYO : NMP(Taping) http://www.sanyosemi.com/en/network/ 82912 TKIM TC-00002806/N2503 TSIM TA-3749 No.7379-1/7 2SA2112 Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current Conditions ICBO IEBO VCB=--40V, IE=0A VEB=--4V, IC=0A Gain-Bandwidth Product hFE fT VCE=--2V, IC=--100mA VCE=--10V, IC=--500mA Output Capacitance Cob VCE(sat)1 VCB=--10V, f=1MHz IC=--1A, IB=--50mA VCE(sat)2 VBE(sat) V(BR)CBO Emitter Cutoff Current DC Current Gain Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage V(BR)CES V(BR)CEO V(BR)EBO ton Turn-ON Time Storage Time tstg tf Fall Time Ratings min typ max 200 Unit --1 μA --1 μA 560 390 MHz 24 pF --135 --270 mV IC=--2A, IB=--100mA --260 --700 mV IC=--2A, IB=--100mA --0.88 --1.2 V IC=--10μA, IE=0A IC=--100μA, RBE=0A --50 V --50 V IC=--1mA, RBE=∞ IE=--10μA, IC=0A --50 V --6 V 30 See specified Test Circuit. ns 230 ns 18 ns Switching Time Test Circuit IB2 PW=20μs D.C.≤1% INPUT OUTPUT IB1 VR 50Ω RB + 100μF VBE=5V RL + 470μF VCC= --25V IC=10IB1= --10IB2= --1A Ordering Information Device 2SA2112-AN Package Shipping memo NMP(Taping) 2,500pcs./box Pb Free No.7379-2/7 2SA2112 IC -- VCE Collector Current, IC -- A A --30 m --20 --1.6 A A --8m --10m --6mA --1.2 --4mA --0.8 --2mA --0.4 A mA --8m 0 --1 --6mA --5mA mA --1.6 2 --1 --4mA --1.2 --3mA --0.8 --2mA --1mA --0.4 IB=0 0 0 --0.2 --0.4 --0.6 --0.8 IB=0 0 --1.0 Collector-to-Emitter Voltage, VCE -- V --3.0 --14mA mA 0 --4 IC -- VCE --2.0 mA Collector Current, IC -- A --2.0 0 --4 --8 --12 --16 --20 Collector-to-Emitter Voltage, VCE -- V IT05441 IC -- VBE hFE -- IC 1000 VCE= --2V IT05442 VCE= --2V 7 DC Current Gain, hFE 5 --2.0 Ta=7 5°C 25°C --25°C Collector Current, IC -- A --2.5 --1.5 --1.0 3 --25°C 2 100 7 --0.5 5 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 Base-to-Emitter Voltage, VBE -- V 3 --0.01 --1.2 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 3 2 °C 25 5°C 7 5 7 = Ta 3 5 C 5° --2 2 7 --0.1 2 3 5 7 --1.0 2 3 5 IT05444 VCE(sat) -- IC --10 7 5 5 --0.1 3 Collector Current, IC -- A IC / IB=20 7 2 IT05443 VCE(sat) -- IC --1.0 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Ta=75°C 25°C IC / IB=50 3 2 --1.0 7 5 3 2 °C 25 C 75° Ta= °C --25 --0.1 7 5 3 2 --0.01 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 3 --0.01 --0.01 5 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A VBE(sat) -- IC --10 2 IT05445 5 Cob -- VCB 100 IC / IB=50 3 IT05446 f=1MHz Output Capacitance, Cob -- pF Base-to-Emitter Saturation Voltage, VBE(sat) -- V 7 5 3 2 25°C --1.0 Ta= --25°C 7 75°C 5 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 3 5 IT05447 7 5 3 2 10 --1.0 2 3 5 7 --10 2 3 5 Collector-to-Base Voltage, VCB -- V 7 --100 IT05448 No.7379-3/7 2SA2112 fT -- IC 1000 Collector Current, IC -- A 5 3 2 100 7 5 3 3 2 10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 3 5 IT05449 PC -- Ta 1.2 10ms <10μs 1ms IC= --3.0A 50 Di ssi --1.0 7 5 DC 0μ s 10 0m s nL im i pa tio op t era 3 2 tio n S --0.1 7 5 3 2 2 ASO ICP= --6.0A μs 100 Gain-Bandwidth Product, fT -- MHz 7 Collector Dissipation, PC -- W --10 7 5 VCE= --10V /B Li mi t Ta=25°C pulse --0.01 Single 2 --0.1 3 5 7 --1.0 2 3 5 7 --10 2 3 Collector-to-Emitter Voltage, VCE -- V 5 7 IT05450 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT05451 No.7379-4/7 2SA2112 Bag Packing Specification 2SA2112-AN No.7379-5/7 2SA2112 Outline Drawing 2SA2112-AN Mass (g) Unit 0.275 mm * For reference No.7379-6/7 2SA2112 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of August, 2012. Specifications and information herein are subject to change without notice. PS No.7379-7/7