15C01SS Ordering number : EN7508A SANYO Semiconductors DATA SHEET NPN Epitaxial Planar Silicon Transistor 15C01SS Low-Frequency General-Purpose Amplifier Applications Applications • Low-frequency Amplifier, muting circuit Features • • • • Large current capacity Low collector-to-emitter saturation voltage (resistance) : RCE(sat) typ=0.58Ω [IC=0.7A, IB=35mA] Ultrasmall, slim flat-lead package (1.4mm×0.8mm×0.6mm) Small ON-resistance (Ron) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Conditions Ratings VCBO VCEO Collector-to-Emitter Voltage Emitter-to-Base Voltage VEBO IC ICP Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature PC Tj Storage Temperature Tstg Mounted on a glass epoxy board (20×30×1.6mm) 15C01SS-TL-E 0.3 3 Packing Type: TL 1.2 A 200 mW 150 °C °C • Package : SSFP • JEITA, JEDEC : SC-81 • Minimum Packing Quantity : 8,000 pcs./reel 0.1 V mA --55 to +150 Product & Package Information Marking 0.3 1 2 0.45 0.2 TL Electrical Connection 0.6 0.07 0.07 YP LOT No. 0.8 0 to 0.02 LOT No. 1.4 V 5 unit : mm (typ) 7029A-002 0.25 V 15 600 Package Dimensions 1.4 Unit 20 1 2 3 3 1 : Base 2 : Emitter 3 : Collector 1 SANYO : SSFP 2 http://semicon.sanyo.com/en/network 71812 TKIM/O3003 TSIM TA-100251 No.7508-1/6 15C01SS Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO VCB=15V, IE=0A VEB=4V, IC=0A Gain-Bandwidth Product hFE fT VCE=2V, IC=10mA VCE=2V, IC=50mA Output Capacitance Cob Collector-to-Emitter Saturation Voltage VCE(sat) VBE(sat) VCB=10V, f=1MHz IC=200mA, IB=10mA Emitter Cutoff Current DC Current Gain Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Ratings Conditions min typ Unit max 300 0.1 μA 0.1 μA 800 330 MHz 3.2 IC=200mA, IB=10mA pF 150 300 mV 0.9 1.2 V V(BR)CBO V(BR)CEO IC=10μA, IE=0A 20 IC=1mA, RBE=∞ 15 V V V(BR)EBO ton IE=10μA, IC=0A 5 V tstg tf See specified Test Circuit. 30 ns 77 ns 40 ns Switching Time Test Circuit IB1 PW=20μs D.C.≤1% OUTPUT IB2 INPUT RB VR RL 50Ω + 470μF + 220μF VBE= --5V VCC=5V IC=20IB1= --20IB2=500mA Ordering Information Device 15C01SS-TL-E Shipping memo SSFP 8,000pcs./reel Pb Free IC -- VCE mA 200 0.8m 0.9 A VCE=2V 0.7mA 700 120 0.4mA 100 0.3mA 80 0.2mA 60 0.1mA 40 600 500 400 5°C 25°C --25 °C 1.0mA 0.5mA 300 Ta= 7 0.6mA 160 140 IC -- VBE 800 Collector Current, IC -- mA 180 Collector Current, IC -- mA Package 200 100 20 IB=0 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Collector-to-Emitter Voltage, VCE -- V 1.8 0 2.0 IT05490 0 0.2 0.4 0.6 0.8 1.0 Base-to-Emitter Voltage, VBE -- V 1.2 IT05491 No.7508-2/6 15C01SS hFE -- IC 1000 DC Current Gain, hFE Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 25°C Ta=75°C 3 --25°C 2 100 7 5 3 1.0 2 3 5 7 10 2 3 5 7 100 2 3 3 2 °C 75 5°C --2 = Ta °C 25 3 2 10 1.0 2 3 5 7 10 2 3 5 7 100 2 3 3 2 5 7 1.0 2 3 5 7 2 10 Collector-to-Base Voltage, VCB -- V 5 7 100 2 5 7 1000 IT05493 2 Ta= --25°C 1000 7 75°C 5 25°C 3 2 100 1.0 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 IT05495 Collector Current, IC -- mA fT -- IC VCE=2V 5 3 2 100 7 5 1.0 3 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 IT05496 Collector Current, IC -- mA PC -- Ta OUT 1kΩ 2 IB 3 2 1.0 7 5 3 M 200 ou nt 150 ed on ag las se po xy bo ard 100 (2 0✕ 3 0✕ 1 50 2 0.1 0.1 3 3 Collector Dissipation, PC -- mW ON-resistance, Ron -- Ω 3 IC / IB=20 250 1kΩ 10 7 5 2 VBE(sat) -- IC IT05497 IN 3 5 7 10 5 Ron -- IB f=1MHz 3 Collector Current, IC -- mA Gain-Bandwidth Product, fT -- MHz Output Capacitance, Cob -- pF 5 3 2 7 7 100 7 5 2 f=1MHz 2 °C 25 3 Cob -- VCB 1.0 0.1 = Ta 5 5 7 1000 IT05494 Collector Current, IC -- mA 10 °C 75 C 5° --2 7 7 5 5 100 10 1.0 Base-to-Emitter Saturation Voltage, VBE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 7 7 2 10000 IC / IB=50 100 3 IT05492 VCE(sat) -- IC 1000 5 5 7 1000 Collector Current, IC -- mA IC / IB=20 7 7 5 VCE(sat) -- IC 1000 VCE=2V .6m m ) 0 2 3 5 7 1.0 2 Base Current, IB -- mA 3 5 7 10 IT06067 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT05520 No.7508-3/6 15C01SS Embossed Taping Specification 15C01SS-TL-E No.7508-4/6 15C01SS Outline Drawing 15C01SS-TL-E Land Pattern Example Mass (g) Unit 0.0018 mm * For reference Unit: mm 1.2 0.5 0.5 0.45 0.45 0.45 0.45 No.7508-5/6 15C01SS Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of July, 2012. Specifications and information herein are subject to change without notice. PS No.7508-6/6