Bussmann® One-Time General Purpose Fuses NON and NOS 250 and 600 Volts, ⁄Ω• to 600 Amps Dimensions All diameters (± 0.008) 5" (600V) (± 0.031) 2" (250V) (± 0.031) 0.81" (± 0.008) .56" (± 0.008) ⁄Ω¡º to 30A ⁄Ω¡º to 30A 5.5" (600V) (± 0.031) 3" (250V) (± 0.031) 1.06" (± 0.008) .81" (± 0.008) 35A to 60A 35A to 60A 7.13" (250V) (± 0.062) 9.63" (600V) (± 0.062) 5.88" (250V) (± 0.062) 7.9" (600V) (± 0.062) 1.56" (250V) 1.84" (600V) 1.06" (250V) 1.34" (600V) 110A to 200A 70A to 100A Catalog Symbol: NON (250V); NOS (600V) For general purpose application Ampere Rating: ⁄Ω• to 600 Amperes Voltage Rating: 250 and 600 Volts AC (or less) Non-Current-Limiting Interrupting Rating: 50,000A RMS Sym. (1-60A), 10,000A (70-600A)† Agency Approval: U.L. Listed, 250 Vac Class K5 (0-60A)*, Class H (70-600A)† 600 Vac Class K5 (0-60A)*, Class H (70-600A)† (65-100A) Class H 125 Vdc NON Only U.L. Guide JDDZ, File E4274 CSA Certified, Class 1421-01, File 53787 *Std. 248-9 †Std. 248-6 Catalog Numbers—NON ONE-TIME (250 Volts AC) 8.63" (250V) (± 0.094) 11.63" (600V) (± 0.094) 10.38" (250V) (± 0.094) 13.38" (600V) (± 0.094) 2.59" (250V) 3.13" (600V) 2.06" (250V) 2.59" (600V) 450A to 600A 225A to 400A General Information: • Protect lighting, heating and other circuits not subject to temporary surges and where available short-circuit currents are relatively low. • ONE-TIME fuses do not have any appreciable degree of timedelay and thus should not be specified in circuits where large transients or motor overloads occur. Use Buss FUSETRON® or LOW-PEAK® dual-element, time-delay fuses. • For general purpose circuits, size at ampere rating of circuit. • For motor circuits, size at 300% to 400%. Catalog Numbers—NOS ONE-TIME (600 Volts AC) NON-⁄Ω• NON-5 NON-40 NON-175 NOS-1 NOS-12 NOS-70 NOS-225 NON-⁄Ω™ NON-6 NON-45 NON-200 NOS-2 NOS-15 NOS-75 NOS-250 NON-‹Ω¢ NON-6⁄Ω¢ NON-50 NON-225 NOS-3 NOS-20 NOS-80 NON-300 NON-°Ω¡º NON-7 NON-60 NON-250 NOS-4 NOS-25 NOS-90 NOS-350 NON-1 NON-8 NON-65 NON-300 NOS-5 NOS-30 NOS-100 NOS-400 NON-1⁄Ω¢ NON-9 NON-70 NON-350 NOS-6 NOS-35 NOS-110 NOS-450 NON-1⁄Ω™ NON-10 NON-75 NON-400 NOS-7 NOS-40 NOS-125 NOS-500 NON-1flΩ¡º NON-12 NON-80 NON-450 NOS-8 NOS-45 NOS-150 NOS-600 NON-2 NON-15 NON-90 NON-500 NOS-9 NOS-50 NOS-175 NON-2⁄Ω™ NON-20 NON-100 NON-600 NOS-10 NOS-60 NON-3 NON-25 NON-110 — NON-3¤Ω¡º NON-30 NON-125 — NON-4 NON-35 NON-150 — Carton Quantity and Weight—NON ONE-TIME (250 Volts AC) Catalog Number Weight** — Carton Quantity and Weight—NOS ONE-TIME (600 Volts AC) Catalog Number Carton Qty. NOS 1–30 10 Weight** Lbs. Kg. 1.45 0.657 Carton Qty. NOS 35–60 10 2.6 1.179 Lbs. Kg. NOS 70–100 5 2.80 1.270 NON ⁄Ω•–30 10 0.38 0.172 NOS 110–200 1 1.24 0.562 NON 35–60 10 1.00 0.453 NOS 225–400 1 3.03 1.374 NON 65–100 5 0.79 0.358 1 4.63 2.100 NON 110–200 1 0.79 0.358 NOS 450–600 **Weight per carton. NON 225–400 1 1.65 0.748 NON 450–600 1 2.76 1.251 NON -(1/8-60 is rated at 125 Vdc with 50,000 AIC Rating. NON -(65-100) is rated at 125 Vdc with 10,000 AIC Rating. CE logo denotes compliance with European Union Low Voltage Directive (50-1000 Vac, 75-1500 Vdc). Refer to BIF document #8002 or contact Bussmann Application Engineering at 636-527-1270 for more information. Applies to OPM-1038 and OPM-1038R. **Weight per carton. 11-12-99 A99117 Rev. A Form No. NON/ NOS Page 1 of 2 BIF Doc #1030 Bussmann® One-Time General Purpose Fuses NON and NOS 250 and 600 Volts, ⁄Ω• to 600 Amps 10 10 TIME IN SECONDS 100 TIME IN SECONDS 100 1 .1 600A 400A 200A 100A 60A 300 30A 35A AMPERE RATING 15A 20A 600A Time-Current Characteristic Curves–Average Melt NOS ONE-TIME (600 Volts AC) 400A 200A 60A 100A 30A 35A 300 15A 20A NON ONE-TIME (250 Volts AC) AMPERE RATING 1 .1 .08 .06 .04 .03 1,000 100 20 .01 10,000 CURRENT IN AMPERES 10,000 20 100 .01 1,000 .02 CURRENT IN AMPERES The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 11-12-99 A99117 Rev. A Form No. NON/NOS Page 2 of 2 BIF Doc #1030