Transistor 2SB0788 (2SB788) Silicon PNP epitaxial planer type For high breakdown voltage low-noise amplification Complementary to 2SD0958 (2SD958) Unit: mm 6.9±0.1 1.0 0.85 (Ta=25˚C) Parameter Symbol Ratings Unit Collector to base voltage VCBO –120 V Collector to emitter voltage VCEO –120 V Emitter to base voltage VEBO –7 V Peak collector current ICP –50 mA Collector current IC –20 mA Collector power dissipation PC 400 mW Junction temperature Tj 150 ˚C Storage temperature Tstg –55 ~ +150 ˚C ■ Electrical Characteristics 4.5±0.1 0.55±0.1 3 0.45±0.05 2 2.5 1:Base 2:Collector 3:Emitter 1 1.25±0.05 ■ Absolute Maximum Ratings 4.1±0.2 7 0. ● High collector to emitter voltage VCEO. Low noise voltage NV. M type package allowing easy automatic and manual insertion as well as stand-alone fixing to the printed circuit board. 1.0 1.5 R0.9 R0.9 R ● 1.0±0.1 ● 0.4 ■ Features 2.5±0.1 2.4±0.2 2.0±0.2 3.5±0.1 1.5 2.5 EIAJ:SC–71 M Type Mold Package (Ta=25˚C) Parameter Symbol Conditions min typ max Unit ICBO VCB = –50V, IE = 0 –100 nA ICEO VCE = –50V, IB = 0 –1 µA Collector to base voltage VCBO IC = –10µA, IE = 0 –120 V Collector to emitter voltage VCEO IC = –1mA, IB = 0 –120 V Emitter to base voltage VEBO IE = –10µA, IC = 0 –7 Forward current transfer ratio hFE* VCE = –5V, IC = –2mA 180 Collector to emitter saturation voltage VCE(sat) IC = –20mA, IB = –2mA Transition frequency fT VCB = –5V, IE = 2mA, f = 200MHz Noise voltage NV Collector cutoff current *h FE VCE = 40V, IC = –1mA, GV = 80dB, Rg = 100kΩ, Function = FLAT V 700 – 0.6 150 V MHz 150 mV Rank classification Rank R S T hFE 180 ~ 360 260 ~ 520 360 ~ 700 Note.) The Part number in the Parenthesis shows conventional part number. 1 Transistor 2SB0788 PC — Ta IC — VBE 25˚C –50 400 350 300 250 200 150 100 Ta=75˚C –40 –25˚C –30 –30 –10 –3 –1 25˚C Ta=75˚C – 0.1 –10 –25˚C – 0.03 0 20 40 60 80 100 120 140 160 0 Ambient temperature Ta (˚C) – 0.4 – 0.8 –1.2 –1.6 –2.0 Transition frequency fT (MHz) 400 25˚C –25˚C 300 200 100 280 240 200 160 120 80 40 0 – 0.1 – 0.3 –1 –3 –10 –30 –100 Collector current IC (mA) VCE=–10V GV=80dB Function=FLAT 100 Rg=100kΩ 80 60 22kΩ 40 4.7kΩ 20 – 0.03 – 0.1 – 0.3 Collector current IC (mA) 0.3 1 3 10 30 Emitter current IE (mA) NV — IC 120 0 0.1 –1 –10 –30 –100 5 VCB=–10V Ta=25˚C 100 Collector output capacitance Cob (pF) 320 Ta=75˚C –3 Cob — VCB VCE=–5V 500 –1 Collector current IC (mA) fT — I E 600 0 – 0.01 – 0.01 – 0.1 – 0.3 Base to emitter voltage VBE (V) hFE — IC Forward current transfer ratio hFE IC/IB=10 – 0.3 –20 50 0 Noise voltage NV (mV) Collector to emitter saturation voltage VCE(sat) (V) VCE=–5V 450 0 2 VCE(sat) — IC –100 –60 Collector current IC (mA) Collector power dissipation PC (mW) 500 IE=0 f=1MHz Ta=25˚C 4 3 2 1 0 –1 –3 –10 –30 –100 Collector to base voltage VCB (V) Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR