Transistor 2SD2260 Silicon NPN triple diffusion planer type For high breakdown voltage general amplification Unit: mm 0.15 0.65 max. 14.5±0.5 ● High collector breakdown voltage. Low collector to emitter saturation voltage VCE(sat). Allowing supply with the radial taping. 1.0 ● 0.85 ● 0.8 ■ Features 1.05 2.5±0.1 (1.45) ±0.05 0.8 4.0 3.5±0.1 6.9±0.1 0.7 +0.1 2.5±0.5 2.5±0.5 (Ta=25˚C) +0.1 ■ Absolute Maximum Ratings 0.45–0.05 0.45–0.05 Symbol Ratings Unit Collector to base voltage VCBO 400 V Collector to emitter voltage VCEO 400 V Emitter to base voltage VEBO 5 V Peak collector current ICP 100 mA Collector current IC 70 mA Collector power dissipation PC 600 mW Junction temperature Tj 150 ˚C Storage temperature Tstg –55 ~ +150 ˚C 2 3 2.5±0.1 1 Parameter Note: In addition to the lead type shown in the upper figure, the type as shown in the lower figure is also available. 1:Emitter 2:Collector 3:Base MT1 Type Package 1.2±0.1 0.65 max. 0.45+–0.1 0.05 (HW type) ■ Electrical Characteristics (Ta=25˚C) Parameter Symbol Conditions min typ max Unit ICBO VCB = 100V, IE = 0 2 µA ICEO VCE = 100V, IB = 0 2 µA Collector to emitter voltage VCEO IC = 100µA, IB = 0 400 V Emitter to base voltage VEBO IE = 10µA, IC = 0 5 V Forward current transfer ratio hFE * VCE = 10V, IC = 5mA 60 Collector to emitter saturation voltage VCE(sat) IC = 50mA, IB = 5mA Transition frequency fT VCB = 10V, IE = –10mA, f = 200MHz Collector output capacitance Cob VCB = 10V, IE = 0, f = 1MHz Collector cutoff current *h FE 220 0.4 50 1.2 80 4 V MHz 10 pF Rank classification Rank Q R hFE 60 ~ 150 100 ~ 220 1 2SD2260 Transistor PC — Ta IC — VCE 120 500 400 300 200 80 0.6mA 60 0.4mA 40 0.2mA 25˚C 100 20 Ta=75˚C –25˚C 80 60 40 20 100 0 80 120 160 200 0 0 2 Collector to emitter saturation voltage VCE(sat) (V) VCE=10V Ta=25˚C 100 80 60 40 20 0 0.8 8 10 0 0.4 1.2 1.6 2.0 2.5 10 3 1 Ta=75˚C 0.3 25˚C –25˚C 0.1 2.0 1.5 1.0 0.5 0.03 0.01 0.01 0.03 0 0.1 0.3 1 3 10 0 0.2 0.4 0.6 fT — I E VCB=250V VCB=10V Ta=25˚C 180 25˚C –25˚C 60 140 103 120 ICBO (Ta) ICBO (Ta=25˚C) Transition frequency fT (MHz) Ta=75˚C 1.0 ICBO — Ta 104 VCE=10V 0.8 Base to emitter voltage VBE (V) 160 240 2.0 VCE=10V Ta=25˚C 30 Collector current IC (mA) 300 1.6 3.0 IC/IB=10 hFE — IC 120 1.2 IB — VBE 100 Base current IB (mA) 360 0.8 Base to emitter voltage VBE (V) VCE(sat) — IC 120 0.4 6 Collector to emitter voltage VCE (V) IC — IB 0 4 Base current IB (mA) 40 Ambient temperature Ta (˚C) Collector current IC (mA) IB=2.0mA Collector current IC (mA) 100 600 0 Forward current transfer ratio hFE VCE=10V Ta=25˚C 1.8mA 1.6mA 1.4mA 1.2mA 1.0mA 0.8mA 700 0 100 80 60 40 102 10 20 0 0.01 0.03 0.1 0.3 1 3 Collector current IC (mA) 2 IC — VBE 120 Collector current IC (mA) Collector power dissipation PC (mW) 800 10 0 –1 1 –3 –10 –30 Emitter current IE (mA) –100 0 40 80 120 160 200 Ambient temperature Ta (˚C) Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR