MURA260T3 Preferred Device Surface Mount Ultrafast Power Rectifier Ideally suited for high voltage, high frequency rectification, or as free wheeling and protection diodes in surface mount applications where compact size and weight are critical to the system. • • • • Small Compact Surface Mountable Package with J-Bend Leads Rectangular Package for Automated Handling High Temperature Glass Passivated Junction Low Forward Voltage Drop (1.2 Volts Max @ 2.0 A, TJ = 150°C) Mechanical Characteristics: http://onsemi.com ULTRAFAST RECTIFIER 2 AMPERES 600 VOLTS • Case: Epoxy, Molded • Weight: 70 mg (approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • • • • • Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Shipped in 12 mm Tape and Reel, 5000 units per reel Polarity: Polarity Band Indicates Cathode Lead ESD Protection: Human Body Model > 4000 V (Class 3) ESD Protection: Machine Model > 400 V (Class C) Marking: U5J MARKING DIAGRAM U5J SMA CASE 403D PLASTIC U5J = Device Code ORDERING INFORMATION MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 600 V Average Rectified Forward Current @ TL = 145°C @ TL = 110°C IF(AV) Non-Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM 30 A TJ - 65 to +175 °C Operating Junction Temperature Range Semiconductor Components Industries, LLC, 2003 January, 2003 - Rev. 2 A Device Package Shipping MURA260T3 SMA 5000/Tape & Reel Preferred devices are recommended choices for future use and best overall value. 1.0 2.0 1 Publication Order Number: MURA260T3/D MURA260T3 THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Lead (TL = 25°C) (Note 1) Thermal Resistance, Junction to Ambient (Note 1) Symbol Max Unit PsiJL (Note 2) RθJA 24 °C/W 216 ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (Note 3) (iF = 2.0 A, TJ = 25°C) (iF = 2.0 A, TJ = 150°C) vF Maximum Instantaneous Reverse Current (Note 3) (Rated dc Voltage, TJ = 25°C) (Rated dc Voltage, TJ = 150°C) iR Maximum Reverse Recovery Time (iF = 1.0 A, di/dt = 50 A/µs) trr Volts 1.45 1.20 µA 5.0 150 75 ns 1. Rating applies when surface mounted on the minimum pad size recommended, PC Board FR-4. 2. In compliance with JEDEC 51, these values (historically represented by RθJL) are now referenced as PsiJL. 3. Pulse Test: Pulse Width = 300 µs, Duty Cycle 2.0%. 1000 TJ = 175°C IR, REVERSE CURRENT (A) IR, REVERSE CURRENT (A) 100 10 TJ = 100°C 1 0.1 TJ = 25°C TJ = 175°C 100 TJ = 100°C 10 TJ = 25°C 0.01 100 200 300 400 500 1 600 100 200 300 400 500 VR, REVERSE VOLTAGE (VOLTS) Figure 1. Typical Reverse Current Figure 2. Maximum Reverse Current 10 100°C TC = 175°C 25°C 1 0.1 0.01 0.3 0 VR, REVERSE VOLTAGE (VOLTS) IF, INSTANTANEOUS FORWARD CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) 0 0.5 0.7 0.9 1.1 1.3 1.5 1.7 10 TC = 175°C 100°C 25°C 1 0.1 0.01 0.3 VF, INSTANTANEOUS VOLTAGE (VOLTS) 0.5 0.7 0.9 1.1 1.3 1.5 1.7 VF, INSTANTANEOUS VOLTAGE (VOLTS) Figure 4. Maximum Forward Voltage Figure 3. Typical Forward Voltage http://onsemi.com 2 600 1.9 MURA260T3 30 NOTE: TYPICAL CAPACITANCE AT 0 V = 24 pF 20 15 10 5 20 15 10 5 0 8 4 12 16 24 20 28 32 36 0 40 12 16 20 24 28 32 Figure 5. Typical Capacitance Figure 6. Maximum Capacitance 4 dc 3 SQUARE WAVE 2 1 0 80 8 VR, REVERSE VOLTAGE (VOLTS) 5 60 4 VR, REVERSE VOLTAGE (VOLTS) IF(AV), AVERAGE FORWARD CURRENT (A) 0 100 120 140 160 180 160 180 0.8 0.7 0.6 SQUARE WAVE 0.5 0.4 0.3 0.2 0.1 0 0 20 40 60 80 100 120 140 TA, AMBIENT TEMPERATURE (°C) Figure 8. Current Derating, Ambient (FR-4 Board with Minimum Pad) 4.5 4 dc 3.5 3 SQUARE WAVE 2.5 2 1.5 1 0.5 0 0.5 40 dc Figure 7. Current Derating, Lead 0 36 1 0.9 TL, LEAD TEMPERATURE (°C) PF, AVERAGE POWER DISSIPATION (W) IF(AV), AVERAGE FORWARD CURRENT (A) 0 NOTE: MAXIMUM CAPACITANCE AT 0 V = 27 pF 25 C, CAPACITANCE (pF) C, CAPACITANCE (pF) 25 1 1.5 2 2.5 3 IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 9. Power Dissipation http://onsemi.com 3 3.5 MURA260T3 PACKAGE DIMENSIONS SMA CASE 403D-02 ISSUE A S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 403D−01 OBSOLETE, NEW STANDARD IS 403D−02. A D DIM A B C D H J K S B POLARITY INDICATOR OPTIONAL AS NEEDED INCHES MIN MAX 0.160 0.180 0.090 0.115 0.075 0.095 0.050 0.064 0.002 0.006 0.006 0.016 0.030 0.060 0.190 0.220 MILLIMETERS MIN MAX 4.06 4.57 2.29 2.92 1.91 2.41 1.27 1.63 0.05 0.15 0.15 0.41 0.76 1.52 4.83 5.59 C K J H 0.157 4.0 0.0787 2.0 0.0787 2.0 inches mm SMA FOOTPRINT ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected] JAPAN: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 Email: [email protected] ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800-282-9855 Toll Free USA/Canada http://onsemi.com 4 MURA260T3/D