AD ADSP

Blackfin® Embedded
Symmetric Multiprocessor
ADSP-BF561
a
FEATURES
PERIPHERALS
Dual symmetric 600 MHz high performance Blackfin cores
328K bytes of on-chip memory (see memory information
on Page 4)
Each Blackfin core includes:
Two 16-bit MACs, two 40-bit ALUs, four 8-bit video ALUs,
40-bit shifter
RISC-like register and instruction model for ease of programming and compiler-friendly support
Advanced debug, trace, and performance monitoring
0.8 V to 1.35 V core VDD with on-chip voltage regulator
3.3 V and 2.5 V compliant I/O
256-ball mini-BGA and 297-ball PBGA package options
Two parallel input/output peripheral interface units supporting ITU-R 656 video and glueless interface to analog front
end ADCs
Two dual channel, full duplex synchronous serial ports supporting eight stereo I2S channels
Dual 16-channel DMA controllers and one internal memory
DMA controller
12 general-purpose 32-bit timers/counters, with PWM
capability
SPI®-compatible port
UART with support for IrDA®
Dual watchdog timers
48 programmable flags
On-chip phase-locked loop capable of 0.5× to 64× frequency
multiplication
IRQ CONTROL/
WATCHDOG
TIMER
VOLTAGE
REGULATOR
B
L1
INSTRUCTION
MEMORY
MMU
B
L1
DATA
MEMORY
L1
INSTRUCTION
MEMORY
MMU
IRQ CONTROL/
WATCHDOG
TIMER
JTAG TEST
EMULATION
UART
IrDA
SPI
L1
DATA
MEMORY
L2 SRAM
128K BYTES
SPORT0
IMDMA
CONTROLLER
CORE SYSTEM/BUS INTERFACE
SPORT1
GPIO
EAB
DMA
CONTROLLER1
32
TIMERS
DMA
CONTROLLER2
DEB
DAB
BOOT ROM
32
PAB
16
16
DAB
EXTERNAL PORT
FLASH/SDRAM CONTROL
PPI0
PPI1
Figure 1. Functional Block Diagram
Blackfin and the Blackfin logo are registered trademarks of Analog Devices, Inc.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
© 2006 Analog Devices, Inc. All rights reserved.
ADSP-BF561
TABLE OF CONTENTS
General Description ................................................. 4
Programmable Flags Cycle Timing ....................... 38
Portable Low Power Architecture ............................. 4
Timer Cycle Timing .......................................... 39
Blackfin Processor Core .......................................... 4
JTAG Test and Emulation Port Timing .................. 40
Memory Architecture ............................................ 5
Output Drive Currents ......................................... 41
DMA Controllers .................................................. 9
Power Dissipation ............................................... 42
Watchdog Timer .................................................. 9
Test Conditions .................................................. 43
Timers ............................................................. 10
Environmental Conditions .................................... 45
Serial Ports (SPORTs) .......................................... 10
256-Ball MBGA Pinout ............................................ 46
Serial Peripheral Interface (SPI) Port ....................... 10
297-Ball PBGA Pinout ............................................. 51
UART Port ........................................................ 10
Outline Dimensions ................................................ 56
Programmable Flags (PFx) .................................... 11
Ordering Guide ..................................................... 58
Parallel Peripheral Interface ................................... 11
Dynamic Power Management ................................ 12
Voltage Regulation .............................................. 13
Clock Signals ..................................................... 13
Booting Modes ................................................... 14
Instruction Set Description ................................... 14
Development Tools ............................................. 15
Designing an Emulator-Compatible
Processor Board (Target) ................................... 16
Related Documents ............................................. 16
Pin Descriptions .................................................... 17
Specifications ........................................................ 20
Recommended Operating Conditions ...................... 20
Electrical Characteristics ....................................... 20
Absolute Maximum Ratings .................................. 21
Package Information ........................................... 21
ESD Sensitivity ................................................... 21
Timing Specifications .......................................... 22
Clock and Reset Timing .................................... 23
Asynchronous Memory Read Cycle Timing ........... 24
Asynchronous Memory Write Cycle Timing .......... 25
SDRAM Interface Timing .................................. 26
External Port Bus Request and Grant Cycle Timing .. 27
Parallel Peripheral Interface Timing ..................... 28
Serial Ports ..................................................... 31
Serial Peripheral Interface (SPI) Port—
Master Timing ............................................. 35
Serial Peripheral Interface (SPI) Port—
Slave Timing ............................................... 36
Universal Asynchronous Receiver Transmitter (UART)
Port—Receive and Transmit Timing ................. 37
Rev. A |
Page 2 of 60 |
May 2006
ADSP-BF561
REVISION HISTORY
5/06—Changes from Rev. 0 to Rev. A
Minor format and wording changes throughout the docunment.
Changed voltage range in Features.................................1
Changed PLL multiplier range in Peripherals ...................1
Changed figure Blackfin Processor Core..........................5
Changed title of Table 2 ..............................................8
Moved section Timers .............................................. 10
Replaced section Parallel Peripheral Interface ................. 11
Replaced figure Frequency Modification Methods ........... 13
Added section EZ-KIT Lite Evaluation Board ................. 16
Added section Related Documents............................... 16
Reformated table Pin Descriptions............................... 17
Changed Recommended Operating Conditions .............. 20
Changed CIN in Electrical Characteristics....................... 20
Changed Absolute Maximum Ratings........................... 21
Added Maximum Duty Cycle for Input Transient Voltage. 21
Added Package Information....................................... 21
Changed Core Clock Requirements ............................. 22
Added Maximum SCLK Conditions............................. 22
Changed figure Clock and Reset Timing ....................... 23
Changed SDRAM Interface Timing ............................. 26
Changed Parallel Peripheral Interface Timing................. 28
Changed figures in Parallel Peripheral Interface Timing.... 28
Changed figure Serial Ports ........................................ 32
Rewrote/Changed values in Power Dissipation ............... 42
Rewrote section Test Conditions ................................. 43
Changed title of Figure 37 through Figure 44.................. 44
Reordered Table 36 .................................................. 46
Added Table 37....................................................... 48
Added Figure 47 and Figure 48 ................................... 50
Added Figure 45 and Figure 46 ................................... 50
Reordered Table 38 .................................................. 51
Added Table 39....................................................... 53
Added Section for Surface Mount Design ...................... 57
Changed Ordering Guide .......................................... 58
1/05—Initial version
Rev. A |
Page 3 of 60 |
May 2006
ADSP-BF561
GENERAL DESCRIPTION
The ADSP-BF561 processor is a high performance member of
the Blackfin family of products targeting a variety of multimedia, industrial, and telecommunications applications. At the
heart of this device are two independent Analog Devices
Blackfin processors. These Blackfin processors combine a dualMAC state-of-the-art signal processing engine, the advantage of
a clean, orthogonal RISC-like microprocessor instruction set,
and single instruction, multiple data (SIMD) multimedia capabilities in a single instruction set architecture.
The ADSP-BF561 processor has 328K bytes of on-chip memory.
Each Blackfin core includes:
The powerful 40-bit shifter has extensive capabilities for performing shifting, rotating, normalization, extraction, and
depositing of data. The data for the computational units is
found in a multiported register file of sixteen 16-bit entries or
eight 32-bit entries.
A powerful program sequencer controls the flow of instruction
execution, including instruction alignment and decoding. The
sequencer supports conditional jumps and subroutine calls, as
well as zero overhead looping. A loop buffer stores instructions
locally, eliminating instruction memory accesses for tight
looped code.
Two data address generators (DAGs) provide addresses for
simultaneous dual operand fetches from memory. The DAGs
share a register file containing four sets of 32-bit Index, Modify,
Length, and Base registers. Eight additional 32-bit registers
provide pointers for general indexing of variables and stack
locations.
• 16K bytes of instruction SRAM/cache
• 16K bytes of instruction SRAM
• 32K bytes of data SRAM/cache
• 32K bytes of data SRAM
• 4K bytes of scratchpad SRAM
Additional on-chip memory peripherals include:
• 128K bytes of low latency on-chip L2 SRAM
• Four-channel internal memory DMA controller
• External memory controller with glueless support for
SDRAM, mobile SDRAM, SRAM, and flash.
PORTABLE LOW POWER ARCHITECTURE
Blackfin processors provide world-class power management
and performance. Blackfin processors are designed in a low
power and low voltage design methodology and feature
dynamic power management, the ability to vary both the voltage
and frequency of operation to significantly lower overall power
consumption. Varying the voltage and frequency can result in a
substantial reduction in power consumption, compared with
just varying the frequency of operation. This translates into
longer battery life for portable appliances.
BLACKFIN PROCESSOR CORE
As shown in Figure 2, each Blackfin core contains two multiplier/accumulators (MACs), two 40-bit ALUs, four video ALUs,
and a single shifter. The computational units process 8-bit,
16-bit, or 32-bit data from the register file.
Each MAC performs a 16-bit by 16-bit multiply in every cycle,
with accumulation to a 40-bit result, providing eight bits of
extended precision. The ALUs perform a standard set of arithmetic and logical operations. With two ALUs capable of
operating on 16-bit or 32-bit data, the flexibility of the computation units covers the signal processing requirements of a varied
set of application needs.
Each of the two 32-bit input registers can be regarded as two
16-bit halves, so each ALU can accomplish very flexible single
16-bit arithmetic operations. By viewing the registers as pairs of
16-bit operands, dual 16-bit or single 32-bit operations can be
accomplished in a single cycle. By further taking advantage of
the second ALU, quad 16-bit operations can be accomplished
simply, accelerating the per cycle throughput.
Rev. A |
Blackfin processors support a modified Harvard architecture in
combination with a hierarchical memory structure. Level 1 (L1)
memories are those that typically operate at the full processor
speed with little or no latency. Level 2 (L2) memories are other
memories, on-chip or off-chip, that may take multiple processor
cycles to access. At the L1 level, the instruction memory holds
instructions only. The two data memories hold data, and a dedicated scratchpad data memory stores stack and local variable
information. At the L2 level, there is a single unified memory
space, holding both instructions and data.
In addition, half of L1 instruction memory and half of L1 data
memory may be configured as either Static RAMs (SRAMs) or
caches. The Memory Management Unit (MMU) provides memory protection for individual tasks that may be operating on the
core and may protect system registers from unintended access.
The architecture provides three modes of operation: user mode,
supervisor mode, and emulation mode. User mode has
restricted access to certain system resources, thus providing a
protected software environment, while supervisor mode has
unrestricted access to the system and core resources.
The Blackfin instruction set has been optimized so that 16-bit
op-codes represent the most frequently used instructions,
resulting in excellent compiled code density. Complex DSP
instructions are encoded into 32-bit op-codes, representing fully
featured multifunction instructions. Blackfin processors support a limited multi-issue capability, where a 32-bit instruction
can be issued in parallel with two 16-bit instructions, allowing
the programmer to use many of the core resources in a single
instruction cycle.
The Blackfin assembly language uses an algebraic syntax for
ease of coding and readability. The architecture has been optimized for use in conjunction with the VisualDSP C/C++
compiler, resulting in fast and efficient software
implementations.
Page 4 of 60 |
May 2006
ADSP-BF561
ADDRESS ARITHMETIC UNIT
32
DA0
32
L3
B3
M3
I2
L2
B2
M2
I1
L1
B1
M1
I0
L0
B0
M0
SP
FP
P5
DAG1
P4
P3
DAG0
P2
P1
P0
TO MEMORY
DA1
I3
32
PREG
32
RAB
SD
LD1
LD0
32
32
32
ASTAT
32
32
SEQUENCER
R7.H
R6.H
R7.L
R6.L
R5.H
R5.L
R4.H
R4.L
R3.H
R3.L
R2.H
R2.L
R1.H
R1.H
R0.H
R0.L
16
ALIGN
16
8
8
8
8
DECODE
BARREL
SHIFTER
40
40
A0
32
40
40
A1
LOOP BUFFER
CONTROL
UNIT
32
DATA ARITHMETIC UNIT
Figure 2. Blackfin Processor Core
MEMORY ARCHITECTURE
Internal (On-Chip) Memory
The ADSP-BF561 views memory as a single unified 4G byte
address space, using 32-bit addresses. All resources including
internal memory, external memory, and I/O control registers
occupy separate sections of this common address space. The
memory portions of this address space are arranged in a hierarchical structure to provide a good cost/performance balance of
some very fast, low latency memory as cache or SRAM very
close to the processor, and larger, lower cost and performance
memory systems farther away from the processor. The
ADSP-BF561 memory map is shown in Figure 3.
The ADSP-BF561 has four blocks of on-chip memory providing
high bandwidth access to the core.
The L1 memory system in each core is the highest performance
memory available to each Blackfin core. The L2 memory provides additional capacity with lower performance. Lastly, the
off-chip memory system, accessed through the External Bus
Interface Unit (EBIU), provides expansion with SDRAM, flash
memory, and SRAM, optionally accessing more than
768M bytes of physical memory. The memory DMA controllers
provide high bandwidth data movement capability. They can
perform block transfers of code or data between the internal
L1/L2 memories and the external memory spaces.
Rev. A |
The first is the L1 instruction memory of each Blackfin core
consisting of 16K bytes of four-way set-associative cache memory and 16K bytes of SRAM. The cache memory may also be
configured as an SRAM. This memory is accessed at full processor speed. When configured as SRAM, each of the two 16K
banks of memory is broken into 4K sub-banks which can be
independently accessed by the processor and DMA.
The second on-chip memory block is the L1 data memory of
each Blackfin core which consists of four banks of 16K bytes
each. Two of the L1 data memory banks can be configured as
one way of a two-way set-associative cache or as an SRAM. The
other two banks are configured as SRAM. All banks are accessed
at full processor speed. When configured as SRAM, each of the
four 16K banks of memory is broken into 4K sub-banks which
can be independently accessed by the processor and DMA.
The third memory block associated with each core is a 4K byte
scratchpad SRAM which runs at the same speed as the L1 memories, but is only accessible as data SRAM (it cannot be
configured as cache memory and is not accessible via DMA).
Page 5 of 60 |
May 2006
ADSP-BF561
CORE A MEMORY MAP
CORE B MEMORY MAP
0xFFFF FFFF
0xFFE0 0000
CORE MMR REGISTERS
0xFFB0 1000
0xFFB0 0000
0xFFA1 4000
0xFFA1 0000
0xFFA0 4000
0xFFA0 0000
0xFF90 8000
0xFF90 4000
0xFF90 0000
0xFF80 8000
0xFF80 4000
0xFF80 0000
CORE MMR REGISTERS
SYSTEM MMR REGISTERS
0xFFC0 0000
RESERVED
L1 SCRATCHPAD SRAM (4K)
RESERVED
L1 INSTRUCTION SRAM/CACHE (16K)
RESERVED
L1 INSTRUCTION SRAM (16K)
RESERVED
RESERVED
L1 DATA BANK B SRAM/CACHE (16K)
L1 DATA BANK B SRAM (16K)
RESERVED
L1 DATA BANK A SRAM/CACHE (16K)
L1 DATA BANK A SRAM (16K)
0xFF80 0000
RESERVED
0xFF70 1000
L1 SCRATCHPAD SRAM (4K)
RESERVED
L1 INSTRUCTION SRAM/CACHE (16K)
RESERVED
RESERVED
L1 DATA BANK B SRAM/CACHE (16K)
L1 DATA BANK B SRAM (16K)
RESERVED
L1 DATA BANK A SRAM (16K)
0xFEB0 0000
0xEF00 4000
0xEF00 0000
0x3000 0000
0x2C00 0000
0x2800 0000
0x2400 0000
0x2000 0000
Top of last SDRAM page
0xFF60 0000
0xFF50 8000
0xFF50 4000
0xFF50 0000
0xFF40 8000
L1 DATA BANK A SRAM/CACHE (16K)
0xFEB2 0000
0xFF61 0000
0xFF60 4000
L1 INSTRUCTION SRAM (16K)
RESERVED
INTERNAL MEMORY
0xFF70 0000
0xFF61 4000
0xFF40 4000
0xFF40 0000
RESERVED
L2 SRAM (128K)
RESERVED
BOOT ROM
RESERVED
ASYNC MEMORY BANK 3
ASYNC MEMORY BANK 2
ASYNC MEMORY BANK 1
ASYNC MEMORY BANK 0
EXTERNAL MEMORY
RESERVED
SDRAM BANK 3
SDRAM BANK 2
SDRAM BANK 1
0x0000 0000
SDRAM BANK 0
Figure 3. Memory Map
The fourth on-chip memory system is the L2 SRAM memory
array which provides 128K bytes of high speed SRAM operating
at one half the frequency of the core, and slightly longer latency
than the L1 memory banks. The L2 memory is a unified instruction and data memory and can hold any mixture of code and
data required by the system design. The Blackfin cores share a
dedicated low latency 64-bit wide data path port into the L2
SRAM memory.
Each Blackfin core processor has its own set of core Memory
Mapped Registers (MMRs) but share the same system MMR
registers and 128K bytes L2 SRAM memory.
External (Off-Chip) Memory
The ADSP-BF561 external memory is accessed via the External
Bus Interface Unit (EBIU). This interface provides a glueless
connection to up to four banks of synchronous DRAM
Rev. A |
(SDRAM) as well as up to four banks of asynchronous memory
devices, including flash, EPROM, ROM, SRAM, and memory
mapped I/O devices.
The PC133-compliant SDRAM controller can be programmed
to interface to up to four banks of SDRAM, with each bank containing between 16M bytes and 128M bytes providing access to
up to 512M bytes of SDRAM. Each bank is independently programmable and is contiguous with adjacent banks regardless of
the sizes of the different banks or their placement. This allows
flexible configuration and upgradability of system memory
while allowing the core to view all SDRAM as a single, contiguous, physical address space.
The asynchronous memory controller can also be programmed
to control up to four banks of devices with very flexible timing
parameters for a wide variety of devices. Each bank occupies a
Page 6 of 60 |
May 2006
ADSP-BF561
64M byte segment regardless of the size of the devices used so
that these banks will only be contiguous if fully populated with
64M bytes of memory.
I/O Memory Space
Blackfin processors do not define a separate I/O space. All
resources are mapped through the flat 32-bit address space. Onchip I/O devices have their control registers mapped into memory mapped registers (MMRs) at addresses near the top of the
4G byte address space. These are separated into two smaller
blocks, one which contains the control MMRs for all core functions, and the other which contains the registers needed for
setup and control of the on-chip peripherals outside of the core.
The core MMRs are accessible only by the core and only in
supervisor mode and appear as reserved space by on-chip
peripherals. The system MMRs are accessible by the core in
supervisor mode and can be mapped as either visible or reserved
to other devices, depending on the system protection
model desired.
Booting
The ADSP-BF561 contains a small boot kernel, which configures the appropriate peripheral for booting. If the ADSP-BF561
is configured to boot from boot ROM memory space, the processor starts executing from the on-chip boot ROM.
Event Handling
The event controller on the ADSP-BF561 handles all asynchronous and synchronous events to the processor. The
ADSP-BF561 provides event handling that supports both nesting and prioritization. Nesting allows multiple event service
routines to be active simultaneously. Prioritization ensures that
servicing of a higher priority event takes precedence over servicing of a lower priority event. The controller provides support for
five different types of events:
• Emulation – An emulation event causes the processor to
enter emulation mode, allowing command and control of
the processor via the JTAG interface.
• Reset – This event resets the processor.
• Nonmaskable Interrupt (NMI) – The NMI event can be
generated by the software watchdog timer or by the NMI
input signal to the processor. The NMI event is frequently
used as a power-down indicator to initiate an orderly shutdown of the system.
• Exceptions – Events that occur synchronously to program
flow, i.e., the exception will be taken before the instruction
is allowed to complete. Conditions such as data alignment
violations or undefined instructions cause exceptions.
The ADSP-BF561 event controller consists of two stages: the
Core Event Controller (CEC) and the System Interrupt Controller (SIC). The Core Event Controller works with the System
Interrupt Controller to prioritize and control all system events.
Conceptually, interrupts from the peripherals enter into the
SIC, and are then routed directly into the general-purpose
interrupts of the CEC.
Core Event Controller (CEC)
The CEC supports nine general-purpose interrupts (IVG15–7),
in addition to the dedicated interrupt and exception events. Of
these general-purpose interrupts, the two lowest priority interrupts (IVG15–14) are recommended to be reserved for software
interrupt handlers, leaving seven prioritized interrupt inputs to
support the peripherals of the ADSP-BF561. Table 1 describes
the inputs to the CEC, identifies their names in the Event Vector
Table (EVT), and lists their priorities.
Table 1. Core Event Controller (CEC)
Priority
(0 is Highest)
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
EVT Entry
EMU
RST
NMI
EVX
IVHW
IVTMR
IVG7
IVG8
IVG9
IVG10
IVG11
IVG12
IVG13
IVG14
IVG15
System Interrupt Controller (SIC)
The System Interrupt Controller provides the mapping and
routing of events from the many peripheral interrupt sources to
the prioritized general-purpose interrupt inputs of the CEC.
Although the ADSP-BF561 provides a default mapping, the user
can alter the mappings and priorities of interrupt events by writ-
• Interrupts – Events that occur asynchronously to program
flow. They are caused by timers, peripherals, input pins,
and an explicit software instruction.
Each event has an associated register to hold the return address
and an associated “return from event” instruction. When an
event is triggered, the state of the processor is saved on the
supervisor stack.
Rev. A |
Event Class
Emulation/Test Control
Reset
Nonmaskable Interrupt
Exceptions
Global Enable
Hardware Error
Core Timer
General Interrupt 7
General Interrupt 8
General Interrupt 9
General Interrupt 10
General Interrupt 11
General Interrupt 12
General Interrupt 13
General Interrupt 14
General Interrupt 15
Page 7 of 60 |
May 2006
ADSP-BF561
ing the appropriate values into the Interrupt Assignment
Registers (SIC_IAR7–0). Table 2 describes the inputs into the
SIC and the default mappings into the CEC.
Table 2. System Interrupt Controller (SIC) (Continued)
Table 2. System Interrupt Controller (SIC)
Peripheral Interrupt Event
PLL wakeup
DMA1 Error (generic)
DMA2 Error (generic)
IMDMA Error
PPI0 Error
PPI1 Error
SPORT0 Error
SPORT1 Error
SPI Error
UART Error
Reserved
DMA1 Channel 0 Interrupt (PPI0)
DMA1 Channel 1 Interrupt (PPI1)
DMA1 Channel 2 Interrupt
DMA1 Channel 3 Interrupt
DMA1 Channel 4 Interrupt
DMA1 Channel 5 Interrupt
DMA1 Channel 6 Interrupt
DMA1 Channel 7 Interrupt
DMA1 Channel 8 Interrupt
DMA1 Channel 9 Interrupt
DMA1 Channel 10 Interrupt
DMA1 Channel 11 Interrupt
DMA2 Channel 0 Interrupt (SPORT0 RX)
DMA2 Channel 1 Interrupt (SPORT0 TX)
DMA2 Channel 2 Interrupt (SPORT1 RX)
DMA2 Channel 3 Interrupt (SPORT1 TX)
DMA2 Channel 4 Interrupt (SPI)
DMA2 Channel 5 Interrupt (UART RX)
DMA2 Channel 6 Interrupt (UART TX)
DMA2 Channel 7 Interrupt
DMA2 Channel 8 Interrupt
DMA2 Channel 9 Interrupt
DMA2 Channel 10 Interrupt
DMA2 Channel 11 Interrupt
Timer0 Interrupt
Timer1 Interrupt
Timer2 Interrupt
Timer3 Interrupt
Timer4 Interrupt
Timer5 Interrupt
Timer6 Interrupt
Default
Mapping
IVG7
IVG7
IVG7
IVG7
IVG7
IVG7
IVG7
IVG7
IVG7
IVG7
IVG7
IVG8
IVG8
IVG8
IVG8
IVG8
IVG8
IVG8
IVG8
IVG8
IVG8
IVG8
IVG8
IVG9
IVG9
IVG9
IVG9
IVG9
IVG9
IVG9
IVG9
IVG9
IVG9
IVG9
IVG9
IVG10
IVG10
IVG10
IVG10
IVG10
IVG10
IVG10
Rev. A |
Peripheral Interrupt Event
Timer7 Interrupt
Timer8 Interrupt
Timer9 Interrupt
Timer10 Interrupt
Timer11 Interrupt
Programmable Flags 15–0 Interrupt A
Programmable Flags 15–0 Interrupt B
Programmable Flags 31–16 Interrupt A
Programmable Flags 31–16 Interrupt B
Programmable Flags 47–32 Interrupt A
Programmable Flags 47–32 Interrupt B
DMA1 Channel 12/13 Interrupt
(Memory DMA/Stream 0)
DMA1 Channel 14/15 Interrupt
(Memory DMA/Stream 1)
DMA2 Channel 12/13 Interrupt
(Memory DMA/Stream 0)
DMA2 Channel 14/15 Interrupt
(Memory DMA/Stream 1)
IMDMA Stream 0 Interrupt
IMDMA Stream 1 Interrupt
Watchdog Timer Interrupt
Reserved
Reserved
Supplemental Interrupt 0
Supplemental Interrupt 1
Default
Mapping
IVG10
IVG10
IVG10
IVG10
IVG10
IVG11
IVG11
IVG11
IVG11
IVG11
IVG11
IVG8
IVG8
IVG9
IVG9
IVG12
IVG12
IVG13
IVG7
IVG7
IVG7
IVG7
Event Control
The ADSP-BF561 provides the user with a very flexible mechanism to control the processing of events. In the CEC, three
registers are used to coordinate and control events. Each of the
registers is 16 bits wide, while each bit represents a particular
event class.
Page 8 of 60 |
• CEC Interrupt Latch Register (ILAT) – The ILAT register
indicates when events have been latched. The appropriate
bit is set when the processor has latched the event and
cleared when the event has been accepted into the system.
This register is updated automatically by the controller, but
may be written only when its corresponding IMASK bit is
cleared.
• CEC Interrupt Mask Register (IMASK) – The IMASK register controls the masking and unmasking of individual
events. When a bit is set in the IMASK register, that event is
unmasked and will be processed by the CEC when asserted.
A cleared bit in the IMASK register masks the event
thereby preventing the processor from servicing the event
even though the event may be latched in the ILAT register.
This register may be read from or written to while in super-
May 2006
ADSP-BF561
ler. DMA-capable peripherals include the SPORTs, SPI port,
UART, and PPI. Each individual DMA-capable peripheral has
at least one dedicated DMA channel.
visor mode. (Note that general-purpose interrupts can be
globally enabled and disabled with the STI and CLI
instructions.)
• CEC Interrupt Pending Register (IPEND) – The IPEND
register keeps track of all nested events. A set bit in the
IPEND register indicates the event is currently active or
nested at some level. This register is updated automatically
by the controller but may be read while in supervisor mode.
The SIC allows further control of event processing by providing
six 32-bit interrupt control and status registers. Each register
contains a bit corresponding to each of the peripheral interrupt
events shown in Table 2.
• SIC Interrupt Mask Register (SIC_IMASK0,
SIC_IMASK1) – This register controls the masking and
unmasking of each peripheral interrupt event. When a bit
is set in the register, that peripheral event is unmasked and
will be processed by the system when asserted. A cleared bit
in the register masks the peripheral event thereby preventing the processor from servicing the event.
• SIC Interrupt Status Register (SIC_ISR0, SIC_ISR1)–
As multiple peripherals can be mapped to a single event,
this register allows the software to determine which peripheral event source triggered the interrupt. A set bit indicates
the peripheral is asserting the interrupt; a cleared bit indicates the peripheral is not asserting the event.
• SIC Interrupt Wakeup Enable Register (SIC_IWR0,
SIC_IWR1) – By enabling the corresponding bit in this
register, each peripheral can be configured to wake up the
processor, should the processor be in a powered-down
mode when the event is generated.
Because multiple interrupt sources can map to a single generalpurpose interrupt, multiple pulse assertions can occur simultaneously, before or during interrupt processing for an interrupt
event already detected on this interrupt input. The IPEND register contents are monitored by the SIC as the interrupt
acknowledgement.
The appropriate ILAT register bit is set when an interrupt rising
edge is detected (detection requires two core clock cycles). The
bit is cleared when the respective IPEND register bit is set. The
IPEND bit indicates that the event has entered into the processor pipeline. At this point the CEC will recognize and queue the
next rising edge event on the corresponding event input. The
minimum latency from the rising edge transition of the generalpurpose interrupt to the IPEND output asserted is three core
clock cycles; however, the latency can be much higher, depending on the activity within and the mode of the processor.
DMA CONTROLLERS
The ADSP-BF561 has multiple, independent DMA controllers
that support automated data transfers with minimal overhead
for the DSP core. DMA transfers can occur between the
ADSP-BF561 internal memories and any of its DMA-capable
peripherals. Additionally, DMA transfers can be accomplished
between any of the DMA-capable peripherals and external
devices connected to the external memory interfaces, including
the SDRAM controller and the asynchronous memory controlRev. A |
The ADSP-BF561 DMA controllers support both 1-dimensional (1-D) and 2-dimensional (2-D) DMA transfers. DMA
transfer initialization can be implemented from registers or
from sets of parameters called descriptor blocks.
The 2-D DMA capability supports arbitrary row and column
sizes up to 64K elements by 64K elements, and arbitrary row
and column step sizes up to ± 32K elements. Furthermore, the
column step size can be less than the row step size, allowing
implementation of interleaved data streams. This feature is
especially useful in video applications where data can be deinterleaved on the fly.
Examples of DMA types supported by the ADSP-BF561 DMA
controllers include:
• A single linear buffer that stops upon completion.
• A circular autorefreshing buffer that interrupts on each full
or fractionally full buffer.
• 1-D or 2-D DMA using a linked list of descriptors.
• 2-D DMA using an array of descriptors, specifying only the
base DMA address within a common page.
In addition to the dedicated peripheral DMA channels, each
DMA Controller has four memory DMA channels provided for
transfers between the various memories of the ADSP-BF561
system. These enable transfers of blocks of data between any of
the memories—including external SDRAM, ROM, SRAM, and
flash memory—with minimal processor intervention. Memory
DMA transfers can be controlled by a very flexible descriptorbased methodology or by a standard register-based autobuffer
mechanism.
Further, the ADSP-BF561 has a four channel Internal Memory
DMA (IMDMA) Controller. The IMDMA Controller allows
data transfers between any of the internal L1 and L2 memories.
WATCHDOG TIMER
Each ADSP-BF561 core includes a 32-bit timer, which can be
used to implement a software watchdog function. A software
watchdog can improve system availability by forcing the processor to a known state, via generation of a hardware reset,
nonmaskable interrupt (NMI), or general-purpose interrupt, if
the timer expires before being reset by software. The programmer initializes the count value of the timer, enables the
appropriate interrupt, then enables the timer. Thereafter, the
software must reload the counter before it counts to zero from
the programmed value. This protects the system from remaining in an unknown state where software, which would normally
reset the timer, has stopped running due to an external noise
condition or software error.
After a reset, software can determine if the watchdog was the
source of the hardware reset by interrogating a status bit in the
timer control register, which is set only upon a watchdog generated reset.
Page 9 of 60 |
May 2006
ADSP-BF561
The timer is clocked by the system clock (SCLK) at a maximum
frequency of fSCLK.
• Interrupts – Each transmit and receive port generates an
interrupt upon completing the transfer of a data word or
after transferring an entire data buffer or buffers through
DMA.
TIMERS
There are 14 programmable timer units in the ADSP-BF561.
Each of the 12 general-purpose timer units can be independently programmed as a Pulse-Width Modulator (PWM),
internally or externally clocked timer, or pulse-width counter.
The general-purpose timer units can be used in conjunction
with the UART to measure the width of the pulses in the data
stream to provide an autobaud detect function for a serial channel. The general-purpose timers can generate interrupts to the
processor core providing periodic events for synchronization,
either to the processor clock or to a count of external signals.
In addition to the 12 general-purpose programmable timers,
another timer is also provided for each core. These extra timers
are clocked by the internal processor clock (CCLK) and are typically used as a system tick clock for generation of operating
system periodic interrupts.
SERIAL PORTS (SPORTs)
The ADSP-BF561 incorporates two dual-channel synchronous
serial ports (SPORT0 and SPORT1) for serial and multiprocessor communications. The SPORTs support the following
features:
• I2S capable operation.
• Bidirectional operation – Each SPORT has two sets of independent transmit and receive pins, enabling eight channels
of I2S stereo audio.
• Buffered (8-deep) transmit and receive ports – Each port
has a data register for transferring data words to and from
other DSP components and shift registers for shifting data
in and out of the data registers.
• Clocking – Each transmit and receive port can either use an
external serial clock or generate its own, in frequencies
ranging from (fSCLK/131,070) Hz to (fSCLK/2) Hz.
• Word length – Each SPORT supports serial data words
from 3 bits to 32 bits in length, transferred most significant
bit first or least significant bit first.
• Framing – Each transmit and receive port can run with or
without frame sync signals for each data word. Frame sync
signals can be generated internally or externally, active high
or low, and with either of two pulse-widths and early or late
frame sync.
• Companding in hardware – Each SPORT can perform
A-law or µ-law companding according to ITU recommendation G.711. Companding can be selected on the transmit
and/or receive channel of the SPORT without additional
latencies.
• Multichannel capability – Each SPORT supports 128 channels out of a 1,024-channel window and is compatible with
the H.100, H.110, MVIP-90, and HMVIP standards.
SERIAL PERIPHERAL INTERFACE (SPI) PORT
The ADSP-BF561 processor has an SPI-compatible port that
enables the processor to communicate with multiple SPI-compatible devices.
The SPI interface uses three pins for transferring data: two data
pins (master output-slave input, MOSI, and master input-slave
output, MISO) and a clock pin (serial clock, SCK). An SPI chip
select input pin (SPISS) lets other SPI devices select the processor, and seven SPI chip select output pins (SPISEL7–1) let the
processor select other SPI devices. The SPI select pins are reconfigured programmable flag pins. Using these pins, the SPI port
provides a full-duplex, synchronous serial interface which supports both master/slave modes and multimaster environments.
The baud rate and clock phase/polarities for the SPI port are
programmable, and it has an integrated DMA controller, configurable to support transmit or receive data streams. The SPI
DMA controller can only service unidirectional accesses at any
given time.
The SPI port clock rate is calculated as:
f SCLK
SPI Clock Rate = -------------------------------2 × SPI_Baud
Where the 16-bit SPI_Baud register contains a value of 2 to
65,535.
During transfers, the SPI port simultaneously transmits and
receives by serially shifting data in and out on its two serial data
lines. The serial clock line synchronizes the shifting and sampling of data on the two serial data lines.
UART PORT
The ADSP-BF561 processor provides a full-duplex universal
asynchronous receiver/transmitter (UART) port, which is fully
compatible with PC-standard UARTs. The UART port provides
a simplified UART interface to other peripherals or hosts, supporting full-duplex, DMA-supported, asynchronous transfers of
serial data. The UART port includes support for 5 data bits to
8 data bits, 1 stop bit or 2 stop bits, and none, even, or odd parity. The UART port supports two modes of operation:
• DMA operations with single-cycle overhead – Each SPORT
can automatically receive and transmit multiple buffers of
memory data. The DSP can link or chain sequences of
DMA transfers between a SPORT and memory.
Rev. A |
Page 10 of 60 |
• PIO (programmed I/O) – The processor sends or receives
data by writing or reading I/O-mapped UART registers.
The data is double-buffered on both transmit and receive.
• DMA (direct memory access) – The DMA controller transfers both transmit and receive data. This reduces the
number and frequency of interrupts required to transfer
data to and from memory. The UART has two dedicated
May 2006
ADSP-BF561
defined as inputs can be configured to generate hardware
interrupts, while output PFx pins can be configured to generate software interrupts.
DMA channels, one for transmit and one for receive. These
DMA channels have lower default priority than most DMA
channels because of their relatively low service rates.
• Flag Interrupt Sensitivity Registers – The Flag Interrupt
Sensitivity Registers specify whether individual PFx pins
are level- or edge-sensitive and specify, if edge-sensitive,
whether just the rising edge or both the rising and falling
edges of the signal are significant. One register selects the
type of sensitivity, and one register selects which edges are
significant for edge sensitivity.
The baud rate, serial data format, error code generation and status, and interrupts for the UART port are programmable.
The UART programmable features include:
• Supporting bit rates ranging from (fSCLK/1,048,576) bits per
second to (fSCLK/16) bits per second.
• Supporting data formats from seven bits to 12 bits per
frame.
• Both transmit and receive operations can be configured to
generate maskable interrupts to the processor.
The UART port’s clock rate is calculated as:
f SCLK
UART Clock Rate = ----------------------------------------------16 × UART_Divisor
Where the 16-bit UART_Divisor comes from the DLH register
(most significant 8 bits) and DLL register (least significant
8 bits).
In conjunction with the general-purpose timer functions,
autobaud detection is supported.
The capabilities of the UART are further extended with support
for the Infrared Data Association (IrDA) serial infrared physical
layer link specification (SIR) protocol.
PARALLEL PERIPHERAL INTERFACE
The ADSP-BF561 processor provides two parallel peripheral
interfaces (PPI0, PPI1) that can connect directly to parallel A/D
and D/A converters, ITU-R 601/656 video encoders and decoders, and other general-purpose peripherals. Each PPI consists of
a dedicated input clock pin, up to three frame synchronization
pins, and up to 16 data pins. The input clock supports parallel
data rates up to half the system clock rate.
In ITU-R 656 modes, the PPI receives and parses a data stream
of 8-bit or 10-bit data elements. On-chip decode of embedded
preamble control and synchronization information is
supported.
Three distinct ITU-R 656 modes are supported:
• Active video only – The PPI does not read in any data
between the end of active video (EAV) and start of active
video (SAV) preamble symbols, or any data present during
the vertical blanking intervals. In this mode, the control
byte sequences are not stored to memory; they are filtered
by the PPI.
PROGRAMMABLE FLAGS (PFx)
The ADSP-BF561 has 48 bidirectional, general-purpose I/O,
programmable flag (PF47–0) pins. The programmable flag pins
have special functions for SPI port operation. Each programmable flag can be individually controlled by manipulation of the
flag control, status, and interrupt registers as follows:
• Vertical blanking only – The PPI only transfers vertical
blanking interval (VBI) data, as well as horizontal blanking
information and control byte sequences on VBI lines.
• Flag Direction Control Register – Specifies the direction of
each individual PFx pin as input or output.
• Flag Control and Status Registers – Rather than forcing the
software to use a read-modify-write process to control the
setting of individual flags, the ADSP-BF561 employs a
“write one to set” and “write one to clear” mechanism that
allows any combination of individual flags to be set or
cleared in a single instruction, without affecting the level of
any other flags. Two control registers are provided, one
register is written-to in order to set flag values, while
another register is written-to in order to clear flag values.
Reading the flag status register allows software to interrogate the sense of the flags.
• Flag Interrupt Mask Registers – The Flag Interrupt Mask
Registers allow each individual PFx pin to function as an
interrupt to the processor. Similar to the Flag Control Registers that are used to set and clear individual flag values,
one Flag Interrupt Mask Register sets bits to enable an
interrupt function, and the other Flag Interrupt Mask Register clears bits to disable an interrupt function. PFx pins
• Entire field – The entire incoming bitstream is read in
through the PPI. This includes active video, control preamble sequences, and ancillary data that may be embedded in
horizontal and vertical blanking intervals.
Though not explicitly supported, ITU-R 656 output functionality can be achieved by setting up the entire frame structure
(including active video, blanking, and control information) in
memory and streaming the data out the PPI in a frame sync-less
mode. The processor’s 2-D DMA features facilitate this transfer
by allowing the static frame buffer (blanking and control codes)
to be placed in memory once, and simply updating the active
video information on a per-frame basis.
The general-purpose modes of the PPI are intended to suit a
wide variety of data capture and transmission applications. The
modes are divided into four main categories, each allowing up
to 16 bits of data transfer per PPI_CLK cycle:
• Data receive with internally generated frame syncs
• Data receive with externally generated frame syncs
• Data transmit with internally generated frame syncs
• Data transmit with externally generated frame syncs
Rev. A |
Page 11 of 60 |
May 2006
ADSP-BF561
These modes support ADC/DAC connections, as well as video
communication with hardware signaling. Many of the modes
support more than one level of frame synchronization. If
desired, a programmable delay can be inserted between assertion of a frame sync and reception/transmission of data.
DYNAMIC POWER MANAGEMENT
The ADSP-BF561 provides four power management modes and
one power management state, each with a different performance/power profile. In addition, Dynamic Power
Management provides the control functions to dynamically
alter the processor core supply voltage, further reducing power
dissipation. Control of clocking to each of the ADSP-BF561
peripherals also reduces power consumption. See Table 3 for a
summary of the power settings for each mode.
Table 3. Power Settings
PLL
Mode
PLL
Bypassed
Full-On
Enabled No
Active
Enabled/ Yes
Disabled
Sleep
Enabled –
Deep Sleep Disabled –
Hibernate Disabled –
Core
Clock
(CCLK)
Enabled
Enabled
System
Clock
(SCLK)
Enabled
Enabled
Core
Power
On
On
Disabled Enabled On
Disabled Disabled On
Disabled Disabled Off
Full-On Operating Mode—Maximum Performance
In the Full-On mode, the PLL is enabled and is not bypassed,
providing capability for maximum operational frequency. This
is the default execution state in which maximum performance
can be achieved. The processor cores and all enabled peripherals
run at full speed.
Active Operating Mode—Moderate Power Savings
In the Active mode, the PLL is enabled but bypassed. Because
the PLL is bypassed, the processor’s core clock (CCLK) and system clock (SCLK) run at the input clock (CLKIN) frequency. In
this mode, the CLKIN to CCLK multiplier ratio can be changed,
although the changes are not realized until the Full-On mode is
entered. DMA access is available to appropriately configured L1
and L2 memories.
In the Active mode, it is possible to disable the PLL through the
PLL Control Register (PLL_CTL). If disabled, the PLL must be
re-enabled before transitioning to the Full-On or Sleep modes.
Sleep Operating Mode—High Dynamic Power Savings
The Sleep mode reduces power dissipation by disabling the
clock to the processor core (CCLK). The PLL and system clock
(SCLK), however, continue to operate in this mode. Typically an
external event will wake up the processor. When in the Sleep
mode, assertion of wakeup will cause the processor to sense the
value of the BYPASS bit in the PLL Control register (PLL_CTL).
When in the Sleep mode, system DMA access is only available
to external memory, not to L1 or on-chip L2 memory.
Rev. A |
Deep Sleep Operating Mode—Maximum Dynamic Power
Savings
The Deep Sleep mode maximizes power savings by disabling the
clocks to the processor cores (CCLK) and to all synchronous
peripherals (SCLK). Asynchronous peripherals will not be able
to access internal resources or external memory. This powereddown mode can only be exited by assertion of the reset interrupt
(RESET). If BYPASS is disabled, the processor will transition to
the Full-On mode. If BYPASS is enabled, the processor will
transition to the Active mode.
Hibernate Operating State—Maximum Static Power
Savings
The Hibernate state maximizes static power savings by disabling
the voltage and clocks to the processor core (CCLK) and to all
the synchronous peripherals (SCLK). The internal voltage regulator for the processor can be shut off by writing b#00 to the
FREQ bits of the VR_CTL register. This disables both CCLK
and SCLK. Furthermore, it sets the internal power supply voltage (VDDINT) to 0 V to provide the lowest static power dissipation.
Any critical information stored internally (memory contents,
register contents, etc.) must be written to a nonvolatile storage
device prior to removing power if the processor state is to be
preserved. Since VDDEXT is still supplied in this mode, all of the
external pins three-state, unless otherwise specified. This allows
other devices that may be connected to the processor to have
power still applied without drawing unwanted current. The
internal supply regulator can be woken up by asserting the
RESET pin.
Power Savings
As shown in Table 4, the ADSP-BF561 supports two different
power domains. The use of multiple power domains maximizes
flexibility, while maintaining compliance with industry standards and conventions. By isolating the internal logic of the
ADSP-BF561 into its own power domain, separate from the I/O,
the processor can take advantage of Dynamic Power Management, without affecting the I/O devices. There are no
sequencing requirements for the various power domains.
Table 4. ADSP-BF561 Power Domains
Power Domain
All internal logic
I/O
VDD Range
VDDINT
VDDEXT
The power dissipated by a processor is largely a function of the
clock frequency of the processor and the square of the operating
voltage. For example, reducing the clock frequency by 25%
results in a 25% reduction in dynamic power dissipation, while
reducing the voltage by 25% reduces dynamic power dissipation
by more than 40%. Further, these power savings are additive, in
that if the clock frequency and supply voltage are both reduced,
the power savings can be dramatic.
The Dynamic Power Management feature of the ADSP-BF561
allows both the processor’s input voltage (VDDINT) and clock frequency (fCCLK) to be dynamically controlled.
Page 12 of 60 |
May 2006
ADSP-BF561
CLOCK SIGNALS
The savings in power dissipation can be modeled using the
power savings factor and % power savings calculations.
The ADSP-BF561 can be clocked by an external crystal, a sine
wave input, or a buffered, shaped clock derived from an external
clock oscillator.
The power savings factor is calculated as:
power savings factor
If an external clock is used, it should be a TTL-compatible signal
and must not be halted, changed, or operated below the specified frequency during normal operation. This signal is
connected to the processor CLKIN pin. When an external clock
is used, the XTAL pin must be left unconnected.
f CCLKRED ⎛ V DDINTRED ⎞ 2 ⎛ T RED ⎞
- × -------------------------- × ------------= -------------------⎝ T NOM ⎠
f CCLKNOM ⎝ V DDINTNOM⎠
where the variables in the equations are:
fCCLKNOM is the nominal core clock frequency
Alternatively, because the ADSP-BF561 includes an on-chip
oscillator circuit, an external crystal may be used. The crystal
should be connected across the CLKIN and XTAL pins, with
two capacitors connected as shown in Figure 5.
fCCLKRED is the reduced core clock frequency
VDDINTNOM is the nominal internal supply voltage
VDDINTRED is the reduced internal supply voltage
Capacitor values are dependent on crystal type and should be
specified by the crystal manufacturer. A parallel-resonant, fundamental frequency, microprocessor-grade crystal should be
used.
TNOM is the duration running at fCCLKNOM
TRED is the duration running at fCCLKRED
The percent power savings is calculated as:
% power savings = ( 1 – power savings factor ) × 100%
VOLTAGE REGULATION
The ADSP-BF561 processor provides an on-chip voltage regulator that can generate processor core voltage levels 0.85 V to
1.25 V from an external 2.25 V to 3.6 V supply. Figure 4 shows
the typical external components required to complete the power
management system. The regulator controls the internal logic
voltage levels and is programmable with the Voltage Regulator
Control Register (VR_CTL) in increments of 50 mV. To reduce
standby power consumption, the internal voltage regulator can
be programmed to remove power to the processor core while
keeping I/O power (VDDEXT) supplied. While in the hibernate
state VDDEXT can still be applied, eliminating the need for external
buffers. The voltage regulator can be activated from this powerdown state by asserting RESET, which will then initiate a boot
sequence. The regulator can also be disabled and bypassed at the
user’s discretion.
CLKIN
XTAL
Figure 5. External Crystal Connections
As shown in Figure 6, the core clock (CCLK) and system
peripheral clock (SCLK) are derived from the input clock
(CLKIN) signal. An on-chip PLL is capable of multiplying the
CLKIN signal by a user-programmable 0.5× to 64× multiplication factor. The default multiplier is 10×, but it can be modified
by a software instruction sequence. On the fly frequency
changes can be effected by simply writing to the PLL_DIV
register.
“FI NE” ADJUSTMENT
REQUI RES PLL SEQ UENCING
VDDEXT
100µF
10µH
VDDINT
0.1µF
100µF
1µF
CLKOUT
“CO ARSE” ADJUSTMENT
ON-THE-FLY
2.25V TO 3.6V
INPUT VOLTAGE
RANGE
FDS9431A
CLKIN
ZHCS1000
PLL
0.5× to 64×
÷ 1, 2, 4, 8
CCLK
÷ 1 to 15
SCLK
VCO
VROUT1–0
SCLK ≤ CCLK
SCLK ≤ 133 MHz
EXTERNAL COMPONENTS
Figure 6. Frequency Modification Methods
NOTE: VROUT1–0 SHOULD BE TIED TOGETHER EXTERNALLY
AND DESIGNER SHOULD MINIMIZE TRACE LENGTH TO FDS9431A.
All on-chip peripherals are clocked by the system clock (SCLK).
The system clock frequency is programmable by means of the
SSEL3–0 bits of the PLL_DIV register. The values programmed
Figure 4. Voltage Regulator Circuit
Rev. A |
Page 13 of 60 |
May 2006
ADSP-BF561
into the SSEL fields define a divide ratio between the PLL output
(VCO) and the system clock. SCLK divider values are 1 through
15. Table 5 illustrates typical system clock ratios.
Table 5. Example System Clock Ratios
Signal Name
SSEL3–0
0001
0110
1010
Divider Ratio
VCO/SCLK
1:1
6:1
10:1
Example Frequency
Ratios (MHz)
VCO
SCLK
100
100
300
50
500
50
BOOTING MODES
The ADSP-BF561 has three mechanisms (listed in Table 7) for
automatically loading internal L1 instruction memory or L2
after a reset. A fourth mode is provided to execute from external
memory, bypassing the boot sequence.
Table 7. Booting Modes
BMODE1–0
00
The maximum frequency of the system clock is fSCLK. Note that
the divisor ratio must be chosen to limit the system clock frequency to its maximum of fSCLK. The SSEL value can be changed
dynamically without any PLL lock latencies by writing the
appropriate values to the PLL divisor register (PLL_DIV).
The core clock (CCLK) frequency can also be dynamically
changed by means of the CSEL1–0 bits of the PLL_DIV register.
Supported CCLK divider ratios are 1, 2, 4, and 8, as shown in
Table 6. This programmable core clock capability is useful for
fast core frequency modifications.
01
10
11
The BMODE pins of the Reset Configuration Register, sampled
during power-on resets and software initiated resets, implement
the following modes:
• Execute from 16-bit external memory – Execution starts
from address 0x2000 0000 with 16-bit packing. The boot
ROM is bypassed in this mode. All configuration settings
are set for the slowest device possible (3-cycle hold time,
15-cycle R/W access times, 4-cycle setup).
Table 6. Core Clock Ratios
Signal Name
CSEL1–0
00
01
10
11
Divider Ratio
VCO/CCLK
1:1
2:1
4:1
8:1
Description
Execute from 16-bit external memory
(Bypass Boot ROM)
Boot from 8-bit/16-bit flash
Reserved
Boot from SPI serial EEPROM
(16-bit address range)
• Boot from 8-bit/16-bit external flash memory – The
8-bit/16-bit flash boot routine located in boot ROM memory space is set up using Asynchronous Memory Bank 0.
All configuration settings are set for the slowest device possible (3-cycle hold time; 15-cycle R/W access times; 4-cycle
setup).
Example Frequency
Ratios (MHz)
VCO
CCLK
500
500
500
250
200
50
200
25
The maximum PLL clock time when a change is programmed
via the PLL_CTL register is 40 µs. The maximum time to change
the internal voltage via the internal voltage regulator is also
40 µs. The reset value for the PLL_LOCKCNT register is 0x200.
This value should be programmed to ensure a 40 µs wakeup
time when either the voltage is changed or a new MSEL value is
programmed. The value should be programmed to ensure an
80 µs wakeup time when both voltage and the MSEL value are
changed. The time base for the PLL_LOCKCNT register is the
period of CLKIN.
• Boot from SPI serial EEPROM (16-bit addressable) – The
SPI uses the PF2 output pin to select a single SPI EPROM
device, submits a read command at address 0x0000, and
begins clocking data into the beginning of L1 instruction
memory. A 16-bit addressable SPI-compatible EPROM
must be used.
For each of the boot modes, a boot loading protocol is used to
transfer program and data blocks from an external memory
device to their specified memory locations. Multiple memory
blocks may be loaded by any boot sequence. Once all blocks are
loaded, Core A program execution commences from the start of
L1 instruction SRAM (0xFFA0 0000). Core B remains in a heldoff state until Bit 5 of SICA_SYSCR is cleared. After that, Core B
will start execution at address 0xFF60 0000.
In addition, Bit 4 of the Reset Configuration Register can be set
by application code to bypass the normal boot sequence during
a software reset. For this case, the processor jumps directly to
the beginning of L1 instruction memory.
INSTRUCTION SET DESCRIPTION
The Blackfin processor family assembly language instruction set
employs an algebraic syntax that was designed for ease of coding
and readability. The instructions have been specifically tuned to
provide a flexible, densely encoded instruction set that compiles
to a very small final memory size. The instruction set also pro-
Rev. A |
Page 14 of 60 |
May 2006
ADSP-BF561
vides fully featured multifunction instructions that allow the
programmer to use many of the processor core resources in a
single instruction. Coupled with many features more often seen
on microcontrollers, this instruction set is very efficient when
compiling C and C++ source code. In addition, the architecture
supports both a user (algorithm/application code) and a supervisor (O/S kernel, device drivers, debuggers, ISRs) mode of
operation—allowing multiple levels of access to core processor
resources.
The assembly language, which takes advantage of the processor’s unique architecture, offers the following advantages:
• Seamlessly integrated DSP/CPU features are optimized for
both 8-bit and 16-bit operations.
designer’s development schedule, increasing productivity. Statistical profiling enables the programmer to nonintrusively poll
the processor as it is running the program. This feature, unique
to VisualDSP++, enables the software developer to passively
gather important code execution metrics without interrupting
the real-time characteristics of the program. Essentially, the
developer can identify bottlenecks in software quickly and efficiently. By using the profiler, the programmer can focus on
those areas in the program that impact performance and take
corrective action.
Debugging both C/C++ and assembly programs with the
VisualDSP++ debugger, programmers can:
• View mixed C/C++ and assembly code (interleaved source
and object information).
• A multi-issue load/store modified Harvard architecture,
which supports two 16-bit MAC or four 8-bit ALU plus
two load/store plus two pointer updates per cycle.
• Insert breakpoints.
• Set conditional breakpoints on registers, memory, and
stacks.
• All registers, I/O, and memory are mapped into a unified
4G byte memory space providing a simplified programming model.
• Trace instruction execution.
• Perform linear or statistical profiling of program execution.
• Microcontroller features, such as arbitrary bit and bit-field
manipulation, insertion, and extraction; integer operations
on 8-, 16-, and 32-bit data types; and separate user and kernel stack pointers.
• Code density enhancements, which include intermixing of
16-bit and 32-bit instructions (no mode switching, no code
segregation). Frequently used instructions are encoded as
16-bits.
DEVELOPMENT TOOLS
The ADSP-BF561 is supported with a complete set of
CROSSCORE®† software and hardware development tools,
including Analog Devices emulators and the VisualDSP++®‡
development environment. The same emulator hardware that
supports other Analog Devices processors also fully emulates
the ADSP-BF561.
The VisualDSP++ project management environment lets programmers develop and debug an application. This environment
includes an easy to use assembler that is based on an algebraic
syntax, an archiver (librarian/library builder), a linker, a loader,
a cycle-accurate instruction-level simulator, a C/C++ compiler,
and a C/C++ runtime library that includes DSP and mathematical functions. A key point for these tools is C/C++ code
efficiency. The compiler has been developed for efficient translation of C/C++ code to Blackfin assembly. The Blackfin
processor has architectural features that improve the efficiency
of compiled C/C++ code.
The VisualDSP++ debugger has a number of important features. Data visualization is enhanced by a plotting package that
offers a significant level of flexibility. This graphical representation of user data enables the programmer to quickly determine
the performance of an algorithm. As algorithms grow in complexity, this capability can have increasing significance on the
†
‡
• Fill, dump, and graphically plot the contents of memory.
• Perform source level debugging.
• Create custom debugger windows.
The VisualDSP++ IDE lets programmers define and manage
software development. Its dialog boxes and property pages let
programmers configure and manage all development tools,
including Color Syntax Highlighting in the VisualDSP++
editor. These capabilities permit programmers to:
• Control how the development tools process inputs and
generate outputs.
• Maintain a one-to-one correspondence with the tool’s
command line switches.
The VisualDSP++ Kernel (VDK) incorporates scheduling and
resource management tailored specifically to address the memory and timing constraints of embedded, real-time
programming. These capabilities enable engineers to develop
code more effectively, eliminating the need to start from the
very beginning when developing new application code. The
VDK features include threads, critical and unscheduled regions,
semaphores, events, and device flags. The VDK also supports
priority-based, pre-emptive, cooperative, and time-sliced
scheduling approaches. In addition, the VDK was designed to
be scalable. If the application does not use a specific feature, the
support code for that feature is excluded from the target system.
Because the VDK is a library, a developer can decide whether to
use it or not. The VDK is integrated into the VisualDSP++
development environment, but can also be used with standard
command line tools. When the VDK is used, the development
environment assists the developer with many error prone tasks
and assists in managing system resources, automating the
generation of various VDK-based objects, and visualizing the
system state when debugging an application that uses the VDK.
CROSSCORE is a registered trademark of Analog Devices, Inc.
VisualDSP++ is a registered trademark of Analog Devices, Inc.
Rev. A |
Page 15 of 60 |
May 2006
ADSP-BF561
VCSE is Analog Devices’ technology for creating, using, and
reusing software components (independent modules of substantial functionality) to quickly and reliably assemble software
applications. Components can be downloaded from the Web
and dropped into the application. Component archives can be
published from within VisualDSP++. VCSE supports component implementation in C/C++ or assembly language.
The Expert Linker can be used to visually manipulate the placement of code and data in the embedded system. Memory
utilization can be viewed in a color-coded graphical form. Code
and data can be easily moved to different areas of the processor
or external memory with the drag of the mouse. Runtime stack
and heap usage can be examined. The Expert Linker is fully
compatible with existing Linker Definition File (LDF), allowing
the developer to move between the graphical and textual
environments.
Reference on the Analog Devices website (www.analog.com)—
use site search on “EE-68.” This document is updated regularly
to keep pace with improvements to emulator support.
RELATED DOCUMENTS
The following publications that describe the ADSP-BF561 processors (and related processors) can be ordered from any
Analog Devices sales office or accessed electronically on our
website:
• Getting Started With Blackfin Processors
• ADSP-BF561 Blackfin Processor Hardware Reference
• ADSP-BF53x/BF56x Blackfin Processor Programming
Reference
• ADSP-BF561 Blackfin Processor Anomaly List
Analog Devices emulators use the IEEE 1149.1 JTAG test access
port of the ADSP-BF561 to monitor and control the target
board processor during emulation. The emulator provides fullspeed emulation, allowing inspection and modification of memory, registers, and processor stacks. Nonintrusive in-circuit
emulation is assured by the use of the processor’s JTAG interface—the emulator does not affect the loading or timing of the
target system.
In addition to the software and hardware development tools
available from Analog Devices, third parties provide a wide
range of tools supporting the Blackfin processor family. Third
party software tools include DSP libraries, real-time operating
systems, and block diagram design tools.
EZ-KIT Lite Evaluation Board
For evaluation of ADSP-BF561 processors, use the
ADSP-BF561 EZ-KIT Lite® board available from Analog
Devices. Order part number ADDS-BF561-EZLITE. The board
comes with on-chip emulation capabilities and is equipped to
enable software development. Multiple daughter cards are
available.
DESIGNING AN EMULATOR-COMPATIBLE
PROCESSOR BOARD (TARGET)
The Analog Devices family of emulators are tools that every system developer needs to test and debug hardware and software
systems. Analog Devices has supplied an IEEE 1149.1 JTAG
Test Access Port (TAP) on the ADSP-BF561. The emulator uses
the TAP to access the internal features of the processor, allowing the developer to load code, set breakpoints, observe
variables, observe memory, and examine registers. The processor must be halted to send data and commands, but once an
operation has been completed by the emulator, the processor is
set running at full speed with no impact on system timing.
To use these emulators, the target board must include a header
that connects the processor’s JTAG port to the emulator.
For details on target board design issues, including mechanical
layout, single processor connections, multiprocessor scan
chains, signal buffering, signal termination, and emulator pod
logic, see EE-68: Analog Devices JTAG Emulation Technical
Rev. A |
Page 16 of 60 |
May 2006
ADSP-BF561
PIN DESCRIPTIONS
ADSP-BF561 pin definitions are listed in Table 8. Unused
inputs should be tied or pulled to VDDEXT or GND. Output drive
currents for each driver type are shown in Figure 26 through
Figure 33.
Table 8. Pin Descriptions
Pin Name
EBIU
ADDR25–2
DATA31–0
ABE3–0/SDQM3–0
BR
BG
BGH
EBIU (ASYNC)
AMS3–0
ARDY
AOE
AWE
ARE
EBIU (SDRAM)
SRAS
SCAS
SWE
SCKE
SCLK0/CLKOUT
SCLK1
SA10
SMS3–0
PF/TIMER
PF0/SPISS/TMR0
PF1/SPISEL1/TMR1
PF2/SPISEL2/TMR2
PF3/SPISEL3/TMR3
PF4/SPISEL4/TMR4
PF5/SPISEL5/TMR5
PF6/SPISEL6/TMR6
PF7/SPISEL7/TMR7
PF8
PF9
PF10
PF11
PF12
PF13
PF14
PF15/EXT CLK
Driver
Type1 Pull-Up/Down Requirement
Type Function
O
I/O
O
I
O
O
Address Bus for Async/Sync Access
Data Bus for Async/Sync Access
Byte Enables/Data Masks for Async/Sync Access
Bus Request
Bus Grant
Bus Grant Hang
A
A
A
O
I
O
O
O
Bank Select
Hardware Ready Control
Output Enable
Write Enable
Read Enable
A
A
A
A
None
Pull-up Required If Function Not Used
None
None
None
O
O
O
O
O
O
O
O
Row Address Strobe
Column Address Strobe
Write Enable
Clock Enable
Clock Output Pin 0
Clock Output Pin 1
SDRAM A10 Pin
Bank Select
A
A
A
A
B
B
A
A
None
None
None
None
None
None
None
None
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
Programmable Flag/Slave SPI Select/Timer
Programmable Flag/SPI Select/Timer
Programmable Flag/SPI Select/Timer
Programmable Flag/SPI Select/Timer
Programmable Flag/SPI Select/Timer
Programmable Flag/SPI Select/Timer
Programmable Flag/SPI Select/Timer
Programmable Flag/SPI Select/Timer
Programmable Flag
Programmable Flag
Programmable Flag
Programmable Flag
Programmable Flag
Programmable Flag
Programmable Flag
Programmable Flag/External Timer Clock Input
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Rev. A |
Page 17 of 60 |
A
A
May 2006
None
None
None
Pull-up Required If Function Not Used
None
None
ADSP-BF561
Table 8. Pin Descriptions (Continued)
Pin Name
PPI0
PPI0D15–8/PF47–40
PPI0D7–0
PPI0CLK
PPI0SYNC1/TMR8
PPI0SYNC2/TMR9
PPI0SYNC3
PPI1
PPI1D15–8/PF39–32
PPI1D7–0
PPI1CLK
PPI1SYNC1/TMR10
PPI1SYNC2/TMR11
PPI1SYNC3
SPORT0
RSCLK0/PF28
RFS0/PF19
DR0PRI
DR0SEC/PF20
TSCLK0/PF29
TFS0/PF16
DT0PRI/PF18
DT0SEC/PF17
SPORT1
RSCLK1/PF30
RFS1/PF24
DR1PRI
DR1SEC/PF25
TSCLK1/PF31
TFS1/PF21
DT1PRI/PF23
DT1SEC/PF22
SPI
MOSI
MISO
SCK
UART
RX/PF27
TX/PF26
Driver
Type1 Pull-Up/Down Requirement
Type Function
I/O
I/O
I
I/O
I/O
I/O
PPI Data/Programmable Flag Pins
PPI Data Pins
PPI Clock
PPI Sync/Timer
PPI Sync/Timer
PPI Sync
I/O
I/O
I
I/O
I/O
I/O
PPI Data/Programmable Flag Pins
PPI Data Pins
PPI Clock
PPI Sync/Timer
PPI Sync/Timer
PPI Sync
I/O
I/O
I
I/O
I/O
I/O
I/O
I/O
Sport0/Programmable Flag
Sport0 Receive Frame Sync/Programmable Flag
Sport0 Receive Data Primary
Sport0 Receive Data Secondary/Programmable Flag
Sport0 Transmit Serial Clock/Programmable Flag
Sport0 Transmit Frame Sync/Programmable Flag
Sport0 Transmit Data Primary/Programmable Flag
Sport0 Transmit Data Secondary/Programmable Flag
D
C
I/O
I/O
I
I/O
I/O
I/O
I/O
I/O
Sport1/Programmable Flag
Sport1 Receive Frame Sync/Programmable Flag
Sport1 Receive Data Primary
Sport1 Receive Data Secondary/Programmable Flag
Sport1 Transmit Serial Clock/Programmable Flag
Sport1 Transmit Frame Sync/Programmable Flag
Sport1 Transmit Data Primary/Programmable Flag
Sport1 Transmit Data Secondary/Programmable Flag
D
C
C
D
C
C
C
None
None
None
None
None
None
None
None
I/O
I/O
I/O
Master Out Slave In
Master In Slave Out
SPI Clock
C
C
D
None
Pull-up is Necessary if Booting via SPI
None
I/O
I/O
UART Receive/Programmable Flag
UART Transmit/Programmable Flag
C
C
None
None
Rev. A |
Page 18 of 60 |
C
C
C
C
C
C
C
C
C
C
C
D
C
C
C
May 2006
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
ADSP-BF561
Table 8. Pin Descriptions (Continued)
Pin Name
JTAG
EMU
TCK
TDO
TDI
TMS
TRST
Clock
CLKIN
XTAL
Mode Controls
RESET
NMI0
NMI1
BMODE1–0
SLEEP
BYPASS
Voltage Regulator
VROUT1–0
Supplies
VDDEXT
VDDINT
GND
No Connection
1
Driver
Type1 Pull-Up/Down Requirement
Type Function
O
I
O
I
I
I
Emulation Output
JTAG Clock
JTAG Serial Data Out
JTAG Serial Data In
JTAG Mode Select
JTAG Reset
C
I
O
Clock input
Crystal connection
Needs to be at a Level or Clocking
None
I
I
I
I
Always Active if Core Power On
Pull-down Required If Function Not Used
Pull-down Required If Function Not Used
Pull-up or Pull-down Required
O
I
Chip reset signal
Nonmaskable Interrupt Core A
Nonmaskable Interrupt Core B
Dedicated Mode Pin, Configures the Boot Mode
that Follows a Hardware or Software Reset
Sleep
PLL BYPASS Control
O
Regulation Output
N/A
P
P
G
NC
Power Supply
Power Supply
Power Supply Return
NC
N/A
N/A
N/A
N/A
C
C
Refer to Figure 27 on Page 41 to Figure 31 on Page 42.
Rev. A |
Page 19 of 60 |
May 2006
None
Internal Pull-down
None
Internal Pull-down
Internal Pull-down
External Pull-down Necessary If JTAG Not Used
None
Pull-up or Pull-down Required
ADSP-BF561
SPECIFICATIONS
Component specifications are subject to change without notice.
RECOMMENDED OPERATING CONDITIONS
Parameter
VDDINT1
VDDINT1
VDDINT2
VDDINT3
VDDINT
VDDEXT
VDDEXT
VIH
VIL
Min
0.8
0.8
0.8
0.8
0.95
2.25
2.7
2.0
–0.3
Internal Supply Voltage ADSP-BF561SKBCZ500
Internal Supply Voltage ADSP-BF561SKBCZ600
Internal Supply Voltage ADSP-BF561SBB600
Internal Supply Voltage ADSP-BF561SBB500
Internal Supply Voltage ADSP-BF561WBBZ-5A
External Supply Voltage
External Supply Voltage ADSP-BF561WBBZ-5A
High Level Input Voltage4, 5
Low Level Input Voltage5
Nominal
1.25
1.25
1.35
1.25
1.25
2.5 or 3.3
3.3
Max
1.375
1.375
1.4185
1.375
1.312
3.6
3.6
3.6
+0.6
Unit
V
V
V
V
V
V
V
V
V
1
Internal voltage regulator tolerance:
ADSP-BF561SKBCZ500, ADSP-BF561SKBCZ600: VDDINT = –5% to +10%
2
Internal voltage regulator tolerance:
ADSP-BF561SBB600: VDDINT = –7% to +12%
3
Internal voltage regulator tolerance:
ADSP-BF561SBB500: VDDINT = –7% to +12% except at 1.25 V: VDDINT = –5% to +10%
4
The ADSP-BF561 is 3.3 V tolerant (always accepts up to 3.6 V maximum VIH), but voltage compliance (on outputs, VOH) depends on the input VDDEXT, because VOH (maximum)
approximately equals VDDEXT (maximum). This 3.3 V tolerance applies to bidirectional and input only pins.
5
Applies to all signal pins.
ELECTRICAL CHARACTERISTICS
Parameter
VOH
VOL
IIH
IIHP
IIL4
IOZH
IOZL4
CIN
High Level Output Voltage1
Low Level Output Voltage1
High Level Input Current2
High Level Input Current JTAG3
Low Level Input Current2
Three-State Leakage Current5
Three-State Leakage Current5
Input Capacitance6
Test Conditions
@ VDDEXT = 3.0 V, IOH = –0.5 mA
@ VDDEXT = 3.0 V, IOL = 2.0 mA
@ VDDEXT = Maximum, VIN = VDD Maximum
@ VDDEXT = Maximum, VIN = VDD Maximum
@ VDDEXT = Maximum, VIN = 0 V
@ VDDEXT = Maximum, VIN = VDD Maximum
@ VDDEXT = Maximum, VIN = 0 V
fIN = 1 MHz, TAMBIENT = 25°C, VIN = 2.5 V
1
Applies to output and bidirectional pins.
Applies to input pins except JTAG inputs.
3
Applies to JTAG input pins (TCK, TDI, TMS, TRST).
4
Absolute value.
5
Applies to three-statable pins.
6
Applies to all signal pins.
7
Guaranteed, but not tested.
2
Rev. A |
Page 20 of 60 |
May 2006
Min
2.4
Typical
Max
4
0.4
10.0
50.0
10.0
10.0
10.0
87
Unit
V
V
µA
µA
µA
µA
µA
pF
ADSP-BF561
ABSOLUTE MAXIMUM RATINGS
Stresses greater than those listed in the table may cause permanent damage to the device. These are stress ratings only.
Functional operation of the device at these or any other conditions greater than those indicated in the operational sections of
this specification is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device
reliability.
Parameter
Internal (Core) Supply Voltage (VDDINT)
External (I/O) Supply Voltage (VDDEXT)
Input Voltage1
Output Voltage Swing
Load Capacitance
Storage Temperature Range
Junction Temperature Under Bias
1
1
a
Maximum Duty Cycle
100%
40%
25%
15%
10%
ADSP-BF561
StppZccc
vvvvvv.x n.n
yyww country_of_origin
B
Figure 7. Product Information on Package
Table 10. Package Brand Information
Table 9. Maximum Duty Cycle for Input Transient Voltage1
VIN Max (V)
3.80
4.00
4.10
4.20
4.30
The information presented in Figure 7 and Table 10 provides
information about how to read the package brand and relate it
to specific product features. For a complete listing of product
offerings, see the Ordering Guide on Page 58.
Value
–0.3 V to +1.42 V
–0.5 V to +3.8 V
–0.5 V to +3.8 V
–0.5 V to VDDEXT + 0.5 V
200 pF
–65ⴗC to +150ⴗC
125ⴗC
Applies to 100% transient duty cycle. For other duty cycles see Table 9.
VIN Min (V)
–0.50
–0.70
–0.80
–0.90
–1.00
PACKAGE INFORMATION
Brand Key
t
pp
Z
ccc
vvvvvv.x
n.n
yyww
Field Description
Temperature Range
Package Type
Lead Free Option (Optional)
See Ordering Guide
Assembly Lot Code
Silicon Revision
Date Code
Applies to all signal pins with the exception of CLKIN, XTAL, VROUT1–0.
ESD SENSITIVITY
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate
on the human body and test equipment and can discharge without detection. Although the ADSP-BF561
features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high
energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.
Rev. A |
Page 21 of 60 |
May 2006
p
ADSP-BF561
TIMING SPECIFICATIONS
Table 11 through Table 13 describe the timing requirements for
the ADSP-BF561 clocks. Take care in selecting MSEL, SSEL,
and CSEL ratios so as not to exceed the maximum core clock,
system clock, and Voltage Controlled Oscillator (VCO) operat-
ing frequencies, as described in Absolute Maximum Ratings on
Page 21. Table 14 describes phase-locked loop operating
conditions.
Table 11. Core Clock Requirements—ADSP-BF561SKBCZ500, ADSP-BF561SKB500, ADSP-BF561SKBZ500,
ADSP-BF561SBB500, ADSP-BF561SBBZ500, and ADSP-BF561WBBZ-5A
Parameter
tCCLK
Core Cycle Period (VDDINT =1.1875 Vminimum)
Core Cycle Period (VDDINT =1.045 Vminimum)
tCCLK
tCCLK
Core Cycle Period (VDDINT =0.95 Vminimum)
tCCLK
Core Cycle Period (VDDINT =0.855 Vminimum)1
tCCLK
Core Cycle Period (VDDINT =0.8 V minimum)1
1
Min
2.00
2.25
2.86
3.33
4.00
Max
Unit
ns
ns
ns
ns
ns
Min
1.66
2.10
2.35
2.66
4.00
Max
Unit
ns
ns
ns
ns
ns
Not applicable to ADSP-BF561WBBZ-5A.
Table 12. Core Clock Requirements—ADSP-BF561SKBCZ600
Parameter
tCCLK
Core Cycle Period (VDDINT =1.1875 Vminimum)
tCCLK
Core Cycle Period (VDDINT =1.045 Vminimum)
tCCLK
Core Cycle Period (VDDINT =0.95 Vminimum)
tCCLK
Core Cycle Period (VDDINT =0.855 Vminimum)
tCCLK
Core Cycle Period (VDDINT =0.8 V minimum)
Table 13. Core Clock Requirements—ADSP-BF561SBB600, ADSP-BF561SBBZ600, ADSP-BF561SKB600 and
ADSP-BF561SKBZ600
Parameter
tCCLK
Core Cycle Period (VDDINT =1.2825 Vminimum)1
tCCLK
Core Cycle Period (VDDINT =1.1875 Vminimum)
tCCLK
Core Cycle Period (VDDINT =1.045 Vminimum)
tCCLK
Core Cycle Period (VDDINT =0.95 Vminimum)
Core Cycle Period (VDDINT =0.855 V minimum)
tCCLK
tCCLK
Core Cycle Period (VDDINT =0.8 Vminimum)
1
Min
1.66
2.00
2.25
2.86
3.33
4.00
Max
Unit
ns
ns
ns
ns
ns
ns
External voltage regulator required to ensure proper operation at 600 MHz 1.35 V nominal.
Table 14. Phase-Locked Loop Operating Conditions
Parameter
Voltage Controlled Oscillator (VCO) Frequency
Min
50
Max
Maximum fCCLK
Unit
MHz
VDDEXT = 3.3 V
133
100
VDDEXT = 2.5 V
133
100
Unit
MHz
MHz
Table 15. Maximum SCLK Conditions
Parameter1
fSCLK
fSCLK
1
CLKOUT/SCLK Frequency (VDDINT ≥ 1.14 V)
CLKOUT/SCLK Frequency (VDDINT < 1.14 V)
tSCLK (= 1/fSCLK) must be greater than or equal to tCCLK.
Rev. A |
Page 22 of 60 |
May 2006
ADSP-BF561
Clock and Reset Timing
Table 16 and Figure 8 describe clock and reset operations. Per
Absolute Maximum Ratings on Page 21, combinations of
CLKIN and clock multipliers must not select core/peripheral
clocks in excess of 600 MHz/133 MHz.
Table 16. Clock and Reset Timing
Parameter
Timing Requirements
CLKIN Period
tCKIN
tCKINL
CLKIN Low Pulse2
tCKINH
CLKIN High Pulse2
tWRST
RESET Asserted Pulse Width Low3
1
Min
Max
Unit
25.0
10.0
10.0
11 × tCKIN
100.01
ns
ns
ns
ns
If DF bit in PLL_CTL register is set, then the maximum tCKIN period is 50 ns.
Applies to bypass mode and nonbypass mode.
3
Applies after power-up sequence is complete. At power-up, the processor’s internal phase-locked loop requires no more than 2,000 CLKIN cycles, while RESET is asserted,
assuming stable power supplies and CLKIN (not including startup time of external clock oscillator).
2
tCKIN
CLKIN
tCKINL
tCKINH
tWRST
RESET
Figure 8. Clock and Reset Timing
Rev. A |
Page 23 of 60 |
May 2006
ADSP-BF561
Asynchronous Memory Read Cycle Timing
Table 17. Asynchronous Memory Read Cycle Timing
Parameter
Timing Requirements
tSDAT
DATA31–0 Setup Before CLKOUT
tHDAT
DATA31–0 Hold After CLKOUT
tSARDY
ARDY Setup Before CLKOUT
tHARDY
ARDY Hold After CLKOUT
Switching Characteristics
tDO
Output Delay After CLKOUT1
tHO
Output Hold After CLKOUT 1
1
Min
Max
Unit
2.1
0.8
4.0
0.0
ns
ns
ns
ns
6.0
ns
ns
0.8
Output pins include AMS3–0, ABE3–0, ADDR25–2, AOE, ARE.
SETUP
2 CYCLES
PROGRAMMED READ ACCESS
4 CYCLES
HOLD
1 CYCLE
ACCESS EXTENDED
3 CYCLES
CLKOUT
t DO
t HO
AMSx
ABE3–0
BE, ADDRESS
ADDR25–2
AOE
t DO
t HO
ARE
t SARDY
tHARDY
t HARDY
ARDY
tSARDY
tSDAT
t HDAT
DATA31–0
READ
Figure 9. Asynchronous Memory Read Cycle Timing
Rev. A |
Page 24 of 60 |
May 2006
ADSP-BF561
Asynchronous Memory Write Cycle Timing
Table 18. Asynchronous Memory Write Cycle Timing
Parameter
Timing Requirements
tSARDY
ARDY Setup Before CLKOUT
tHARDY
ARDY Hold After CLKOUT
Switching Characteristics
tDDAT
DATA31–0 Disable After CLKOUT
DATA31–0 Enable After CLKOUT
tENDAT
tDO
Output Delay After CLKOUT1
tHO
Output Hold After CLKOUT 1
1
Min
4.0
0.0
6.0
1.0
6.0
0.8
PROGRAMMED WRITE
ACCESS 2 CYCLES
ACCESS
EXTENDED
1 CYCLE
HOLD
1 CYCLE
CLKOUT
t DO
t HO
AMSx
ABE3–0
BE, ADDRESS
ADDR25–2
tDO
tHO
AWE
t HARDY
t SARDY
ARDY
tSARDY
t END AT
DATA31–0
t DD AT
WRITE DATA
Figure 10. Asynchronous Memory Write Cycle Timing
Rev. A |
Page 25 of 60 |
May 2006
Unit
ns
ns
Output pins include AMS3–0, ABE3–0, ADDR25–2, DATA31–0, AOE, AWE.
SETUP
2 CYCLES
Max
ns
ns
ns
ns
ADSP-BF561
SDRAM Interface Timing
Table 19. SDRAM Interface Timing
Parameter
Timing Requirements
tSSDAT
DATA Setup Before CLKOUT
tHSDAT
DATA Hold After CLKOUT
Switching Characteristics
tSCLK
CLKOUT Period1
CLKOUT Width High
tSCLKH
tSCLKL
CLKOUT Width Low
tDCAD
Command, ADDR, Data Delay After CLKOUT2
tHCAD
Command, ADDR, Data Hold After CLKOUT2
tDSDAT
Data Disable After CLKOUT
tENSDAT
Data Enable After CLKOUT
1
2
Min
Max
2.1
0
ns
ns
7.5
2.5
2.5
ns
ns
ns
ns
ns
ns
ns
4.0
0.8
4.0
1.0
Refer to Table 15 on Page 22 for maximum fSCLK at various VDDINT.
Command pins include: SRAS, SCAS, SWE, SDQM, SMS3–0, SA10, SCKE.
tSCLK
tSCLKH
CLKOUT
t SSDAT
t SCLKL
tHSDAT
DATA (IN)
t DCAD
tENSDAT
DATA(OUT)
tDCAD
CMND ADDR
(OUT)
tHCAD
NOTE: COMMAND = SRAS, SCAS, SWE, SDQM, SMS, SA10, SCKE.
Rev. A |
Page 26 of 60 |
tD SDA T
tHCAD
Figure 11. SDRAM Interface Timing
May 2006
Unit
ADSP-BF561
External Port Bus Request and Grant Cycle Timing
Table 20 and Figure 12 describe external port bus request and
bus grant operations.
Table 20. External Port Bus Request and Grant Cycle Timing
Parameter1, 2
Timing Requirements
tBS
BR Asserted to CLKOUT High Setup
tBH
CLKOUT High to BR Deasserted Hold Time
Switching Characteristics
tSD
CLKOUT Low to SMS, Address and RD/WR Disable
tSE
CLKOUT Low to SMS, Address and RD/WR Enable
tDBG
CLKOUT High to BG Asserted Setup
tEBG
CLKOUT High to BG Deasserted Hold Time
tDBH
CLKOUT High to BGH Asserted Setup
CLKOUT High to BGH Deasserted Hold Time
tEBH
1
2
Min
Max
Unit
4.6
0.0
ns
ns
4.5
4.5
3.6
3.6
3.6
3.6
ns
ns
ns
ns
ns
ns
These are preliminary timing parameters that are based on worst-case operating conditions.
The pad loads for these timing parameters are 20 pF.
CLKOUT
tBS
tBH
BR
tSD
tSE
AMSx
tSD
tSE
ADDR25-2
ABE3-0
tSD
tSE
AWE
ARE
tDBG
tEBG
BG
tDBH
BGH
Figure 12. External Port Bus Request and Grant Cycle Timing
Rev. A |
Page 27 of 60 |
May 2006
tEBH
ADSP-BF561
Parallel Peripheral Interface Timing
Table 21, and Figure 13 through Figure 16 , describe Parallel
Peripheral Interface operations.
Table 21. Parallel Peripheral Interface Timing
Parameter
Timing Requirements
tPCLKW
PPI_CLK Width1
tPCLK
PPI_CLK Period1
External Frame Sync Setup Before PPI_CLK
tSFSPE
tHFSPE
External Frame Sync Hold After PPI_CLK
tSDRPE
Receive Data Setup Before PPI_CLK
tHDRPE
Receive Data Hold After PPI_CLK
Switching Characteristics
tDFSPE
Internal Frame Sync Delay After PPI_CLK
Internal Frame Sync Hold After PPI_CLK
tHOFSPE
tDDTPE
Transmit Data Delay After PPI_CLK
tHDTPE
Transmit Data Hold After PPI_CLK
1
Min
Max
5.0
13.3
4.0
1.0
3.5
2.0
ns
ns
ns
ns
ns
ns
8.0
1.7
8.0
2.0
Unit
ns
ns
ns
ns
For PPI modes that use an internally generated frame sync, the PPI_CLK frequency cannot exceed fSCLK/2. For modes with no frame syncs or external frame syncs, PPI_CLK
cannot exceed 75MHz and fSCLK should be equal to or greater than PPI_CLK.
FRAME
SYNC IS
DRIVEN
OUT
DATA0
IS
SAMPLED
POLC = 0
PPI_CLK
PPI_CLK
POLC = 1
t
DFSPE
tHOFSPE
POLS = 1
PPI_FS1
POLS = 0
POLS = 1
PPI_FS2
POLS = 0
tSDRPE
tHDRPE
PPI_DATA
Figure 13. PPI GP Rx Mode with Internal Frame Sync Timing
Rev. A |
Page 28 of 60 |
May 2006
ADSP-BF561
DATA0 IS
SAMPLED
FRAME
SYNC IS
SAMPLED
FOR
DATA0
DATA1 IS
SAMPLED
PPI_CLK
POLC = 0
PPI_CLK
POLC = 1
t
HFSPE
tSFSPE
POLS = 1
PPI_FS1
POLS = 0
POLS = 1
PPI_FS2
POLS = 0
t
t
SDRPE
HDRPE
PPI_DATA
Figure 14. PPI GP Rx Mode with External Frame Sync Timing
FRAME
SYNC IS
SAMPLED
DATA0 IS
DRIVEN
OUT
PPI_CLK
POLC = 0
PPI_CLK
POLC = 1
t
HFSPE
t
SFSPE
POLS = 1
PPI_FS1
POLS = 0
POLS = 1
PPI_FS2
POLS = 0
tHDTPE
PPI_DATA
DATA0
tDDTPE
Figure 15. PPI GP Tx Mode with External Frame Sync Timing
Rev. A |
Page 29 of 60 |
May 2006
ADSP-BF561
FRAME
SYNC IS
DRIVEN
OUT
DATA0 IS
DRIVEN
OUT
PPI_CLK
POLC = 0
PPI_CLK
POLC = 1
t
DFSPE
tHOFSPE
POLS = 1
PPI_FS1
POLS = 0
POLS = 1
PPI_FS2
POLS = 0
tDDTPE
t
HDTPE
PPI_DATA
DATA0
Figure 16. PPI GP Tx Mode with Internal Frame Sync Timing
Rev. A |
Page 30 of 60 |
May 2006
ADSP-BF561
Serial Ports
Table 22 on Page 31 through Table 25 on Page 33 and Figure 17
on Page 32 through Figure 19 on Page 34 describe Serial Port
operations.
Table 22. Serial Ports—External Clock
Parameter
Timing Requirements
tSFSE
TFS/RFS Setup Before TSCLK/RSCLK1
tHFSE TFS/RFS Hold After TSCLK/RSCLK1
tSDRE Receive Data Setup Before RSCLK1
tHDRE Receive Data Hold After RSCLK1
tSCLKW TSCLK/RSCLK Width
tSCLK
TSCLK/RSCLK Period
Switching Characteristics
tDFSE TFS/RFS Delay After TSCLK/RSCLK (Internally Generated TFS/RFS)2
tHOFSE TFS/RFS Hold After TSCLK/RSCLK (Internally Generated TFS/RFS)1
tDDTE Transmit Data Delay After TSCLK1
tHDTE Transmit Data Hold After TSCLK1
1
2
Min
Max
3.0
3.0
3.0
3.0
4.5
15.0
Unit
ns
ns
ns
ns
ns
ns
10.0
0.0
10.0
0.0
ns
ns
ns
ns
Referenced to sample edge.
Referenced to drive edge.
Table 23. Serial Ports—Internal Clock
Parameter
Timing Requirements
tSFSI
TFS/RFS Setup Before TSCLK/RSCLK1
tHFSI
TFS/RFS Hold After TSCLK/RSCLK1
tSDRI
Receive Data Setup Before RSCLK1
tHDRI
Receive Data Hold After RSCLK1
tSCLKW TSCLK/RSCLK Width
tSCLK
TSCLK/RSCLK Period
Switching Characteristics
tDFSI
TFS/RFS Delay After TSCLK/RSCLK (Internally Generated TFS/RFS)2
tHOFSI TFS/RFS Hold After TSCLK/RSCLK (Internally Generated TFS/RFS)1
tDDTI
Transmit Data Delay After TSCLK1
Transmit Data Hold After TSCLK1
tHDTI
tSCLKIW TSCLK/RSCLK Width
1
2
Min
Max
8.0
–2.0
6.0
0.0
4.5
15.0
Unit
ns
ns
ns
ns
ns
ns
3.0
3.0
ns
ns
ns
ns
ns
Max
Unit
–1.0
–2.0
4.5
Referenced to sample edge.
Referenced to drive edge.
Table 24. Serial Ports—Enable and Three-State
Parameter
Switching Characteristics
tDTENE
Data Enable Delay from External TSCLK1
tDDTTE
Data Disable Delay from External TSCLK1
tDTENI
Data Enable Delay from Internal TSCLK
Data Disable Delay from Internal TSCLK1
tDDTTI
1
Min
0
10.0
–2.0
3.0
Referenced to drive edge.
Rev. A |
Page 31 of 60 |
May 2006
ns
ns
ns
ns
ADSP-BF561
DATA RECEIVE—INTERNAL CLOCK
DATA RECEIVE—EXTERNAL CLOCK
DRIVE
EDGE
SAMPLE
EDGE
DRIVE
EDGE
SAMPLE
EDGE
tSCLKIW
tSCLKEW
RSCLK
RSCLK
tDFSE
tDFSE
tHOFSE
tSFSI
tHFSI
RFS
tHOFSE
tSFSE
tHFSE
tSDRE
tHDRE
RFS
tSDRI
tHDRI
DR
DR
NOTE: EITHER THE RISING EDGE OR FALLING EDGE OF RCLK OR TCLK CAN BE USED AS THE ACTIVE SAMPLING EDGE.
DATA TRANSMIT—INTERNAL CLOCK
DATA TRANSMIT—EXTERNAL CLOCK
DRIVE
EDGE
SAMPLE
EDGE
DRIVE
EDGE
SAMPLE
EDGE
tSCLKIW
tSCLKEW
TSCLK
TSCLK
tDFSI
tHOFSI
tDFSE
tSFSI
tHFSI
TFS
tHOFSE
tSFSE
TFS
tDDTI
tDDTE
tHDTI
tHDTE
DT
DT
NOTE: EITHER THE RISING EDGE OR FALLING EDGE OF RCLK OR TCLK CAN BE USED AS THE ACTIVE SAMPLING EDGE.
DRIVE
EDGE
DRIVE
EDGE
TSCLK (EXT)
TFS ("LATE", EXT.)
TSCLK / RSCLK
tDDTTE
tDTENE
DT
DRIVE
EDGE
DRIVE
EDGE
TSCLK (INT)
TFS ("LATE", INT.)
TSCLK / RSCLK
tDTENI
tDDTTI
DT
Figure 17. Serial Ports
Rev. A |
Page 32 of 60 |
May 2006
tHFSE
ADSP-BF561
Table 25. External Late Frame Sync
Parameter
Switching Characteristics
tDDTLFSE Data Delay from Late External TFS or External RFS with MCE = 1, MFD = 01, 2
tDTENLFS Data Enable from Late FS or MCE = 1, MFD = 01, 2
1
2
Min
0
MCE = 1, TFS enable and TFS valid follow tDTENLFS and tDDTLFSE.
If external RFS/TFS setup to RSCLK/TSCLK > tSCLKE/2, then tDDTE/I and tDTENE/I apply; otherwise tDDTLFSE and tDTENLFS apply.
EXTERNAL RFS WITH MCE = 1, MFD = 0
DRIVE
RSCLK
SAMPLE
DRIVE
tSFSE/I
tHOFSE/I
RFS
tDDTE/I
tHDTE/I
tDTENLFS
1ST BIT
DT
2ND BIT
tDDTLFSE
LATE EXTERNAL TFS
DRIVE
TSCLK
SAMPLE
DRIVE
tHOFSE/I
tSFSE/I
TFS
tDDTE/I
tHDTE/I
tDTENLFS
DT
1ST BIT
2ND BIT
tDDTLFSE
Figure 18. External Late Frame Sync (Frame Sync Setup < tSCLK/2)
Rev. A |
Page 33 of 60 |
May 2006
Max
Unit
10.0
ns
ns
ADSP-BF561
EXTERNAL RFS WITH MCE = 1, MFD = 0
DRIVE
RSCLK
SAMPLE
DRIVE
tSFSE/I
tHOFSE/I
RFS
tDDTE/I
tDTENLSCK
DT
tHDTE/I
1ST BIT
2ND BIT
tDDTLSCK
LATE EXTERNAL TFS
DRIVE
SAMPLE
DRIVE
TSCLK
tSFSE/I
tHOFSE/I
TFS
tDDTE/I
tDTENLSCK
DT
tHDTE/I
1ST BIT
2ND BIT
tDDTLSCK
Figure 19. External Late Frame Sync (Frame Sync Setup > tSCLK/2)
Rev. A |
Page 34 of 60 |
May 2006
ADSP-BF561
Serial Peripheral Interface (SPI) Port—
Master Timing
Table 26 and Figure 20 describe SPI port master operations.
Table 26. Serial Peripheral Interface (SPI) Port—Master Timing
Parameter
Timing Requirements
Data Input Valid to SCK Edge (Data Input Setup)
tSSPIDM
tHSPIDM
SCK Sampling Edge to Data Input Invalid
Switching Characteristics
tSDSCIM
SPISELx Low to First SCK Edge
tSPICHM
Serial Clock High Period
tSPICLM
Serial Clock Low Period
Serial Clock Period
tSPICLK
tHDSM
Last SCK Edge to SPISELx High
tSPITDM
Sequential Transfer Delay
tDDSPIDM
SCK Edge to Data Out Valid (Data Out Delay)
tHDSPIDM
SCK Edge to Data Out Invalid (Data Out Hold)
Min
Max
7.5
–1.5
ns
ns
2tSCLK–1.5
2tSCLK–0.5
2tSCLK–1.5
4tSCLK–1.5
2tSCLK–1.5
2tSCLK–1.5
0
–1.0
ns
ns
ns
ns
ns
ns
ns
ns
6
+4.0
SPISELx
(OUTPUT)
tSDSCIM
tSPICHM
tSPICLM
tSPICLM
tSPICHM
tSPICLK
tHDSM
SCK
(CPOL = 0)
(OUTPUT)
SCK
(CPOL = 1)
(OUTPUT)
tDDSPIDM
MOSI
(OUTPUT)
tHDSPIDM
MSB
CPHA=1
tSSPIDM
MISO
(INPUT)
LSB
tHSPIDM
tSSPIDM
LSB VALID
tDDSPIDM
MOSI
(OUTPUT)
CPHA=0
tHDSPIDM
MSB
tSSPIDM
MISO
(INPUT)
tHSPIDM
MSB VALID
LSB
tHSPIDM
MSB VALID
LSB VALID
Figure 20. Serial Peripheral Interface (SPI) Port—Master Timing
Rev. A |
Page 35 of 60 |
May 2006
Unit
tSPITDM
ADSP-BF561
Serial Peripheral Interface (SPI) Port—
Slave Timing
Table 27 and Figure 21 describe SPI port slave operations.
Table 27. Serial Peripheral Interface (SPI) Port—Slave Timing
Parameter
Timing Requirements
Serial Clock High Period
tSPICHS
tSPICLS
Serial Clock Low Period
tSPICLK
Serial Clock Period
tHDS
Last SCK Edge to SPISS Not Asserted
tSPITDS
Sequential Transfer Delay
tSDSCI
SPISS Assertion to First SCK Edge
Data Input Valid to SCK Edge (Data Input Setup)
tSSPID
tHSPID
SCK Sampling Edge to Data Input Invalid
Switching Characteristics
tDSOE
SPISS Assertion to Data Out Active
tDSDHI
SPISS Deassertion to Data High Impedance
tDDSPID
SCK Edge to Data Out Valid (Data Out Delay)
SCK Edge to Data Out Invalid (Data Out Hold)
tHDSPID
Min
Max
2tSCLK–1.5
2tSCLK–1.5
4tSCLK–1.5
2tSCLK–1.5
2tSCLK–1.5
2tSCLK–1.5
1.6
1.6
ns
ns
ns
ns
ns
ns
ns
ns
0
0
0
0
8
8
10
10
SPISS
(INPUT)
tSPICHS
tSPICLS
tSPICLS
tSPICHS
tSPICLK
tHDS
tSPITDS
SCK
(CPOL = 0)
(INPUT)
tSDSCI
SCK
(CPOL = 1)
(INPUT)
tDSOE
tDDSPID
tHDSPID
MISO
(OUTPUT)
tDSDHI
MSB
CPHA=1
tSSPID
MOSI
(INPUT)
LSB
tHSPID
tSSPID
tHSPID
MSB VALID
tDSOE
MISO
(OUTPUT)
tDDSPID
LSB VALID
tDDSPID
tDSDHI
MSB
LSB
tHSPID
CPHA=0
tSSPID
MOSI
(INPUT)
MSB VALID
LSB VALID
Figure 21. Serial Peripheral Interface (SPI) Port—Slave Timing
Rev. A |
Page 36 of 60 |
May 2006
Unit
ns
ns
ns
ns
ADSP-BF561
Universal Asynchronous Receiver Transmitter (UART)
Port—Receive and Transmit Timing
Figure 22 describes UART port receive and transmit operations.
The maximum baud rate is SCLK/16. As shown in Figure 22,
there is some latency between the generation internal UART
interrupts and the external data operations. These latencies are
negligible at the data transmission rates for the UART.
CLKOUT
(SAMPLE CLOCK)
RXD
DATA8–5
STOP
RECEIVE
INTERNAL
UART RECEIVE
INTERRUPT
UART RECEIVE BIT SET BY DATA STOP;
CLEARED BY FIFO READ
START
TXD
DATA8–5
STOP2–1
AS DATA
WRITEN TO
BUFFER
TRANSMIT
INTERNAL
UART TRANSMIT
INTERRUPT
UART TRANSMIT BIT SET BY PROGRAM;
CLEARED BY WRITE TO TRANSMIT
Figure 22. UART Port—Receive and Transmit Timing
Rev. A |
Page 37 of 60 |
May 2006
ADSP-BF561
Programmable Flags Cycle Timing
Table 28 and Figure 23 describe programmable flag operations.
Table 28. Programmable Flags Cycle Timing
Parameter
Timing Requirement
tWFI
Flag Input Pulse Width
Switching Characteristic
tDFO
Flag Output Delay from CLKOUT Low
Min
Max
tSCLK + 1
ns
6
CLKOUT
tDFO
PF (OUTPUT)
FLAG OUTPUT
tWFI
PF (INPUT)
FLAG INPUT
Figure 23. Programmable Flags Cycle Timing
Rev. A |
Page 38 of 60 |
May 2006
Unit
ns
ADSP-BF561
Timer Cycle Timing
Table 29 and Figure 24 describe timer expired operations. The
input signal is asynchronous in width capture mode and external clock mode and has an absolute maximum input frequency
of fSCLK/2 MHz.
Table 29. Timer Cycle Timing
Parameter
Timing Characteristics
Timer Pulse Width Input Low1 (Measured in SCLK Cycles)
tWL
tWH
Timer Pulse Width Input High1 (Measured in SCLK Cycles)
Switching Characteristic
tHTO Timer Pulse Width Output2 (Measured in SCLK Cycles)
1
2
Min
Max
1
1
1
Unit
SCLK
SCLK
(232–1)
SCLK
The minimum pulse-widths apply for TMRx input pins in width capture and external clock modes. They also apply to the PF1 or PPICLK input pins in PWM output mode.
The minimum time for tHTO is one cycle, and the maximum time for tHTO equals (232–1) cycles.
CLKOUT
tHTO
TMRx
(PWM OUTPUT MODE)
TMRx
(WIDTH CAPTURE AND
EXTERNAL CLOCK MODES)
tWL
tWH
Figure 24. Timer PWM_OUT Cycle Timing
Rev. A |
Page 39 of 60 |
May 2006
ADSP-BF561
JTAG Test and Emulation Port Timing
Table 30 and Figure 25 describe JTAG port operations.
Table 30. JTAG Port Timing
Parameter
Timing Parameters
tTCK
TCK Period
tSTAP
TDI, TMS Setup Before TCK High
tHTAP
TDI, TMS Hold After TCK High
tSSYS
System Inputs Setup Before TCK High1
tHSYS
System Inputs Hold After TCK High1
tTRSTW
TRST Pulse-Width2 (Measured in TCK Cycles)
Switching Characteristics
tDTDO
TDO Delay from TCK Low
tDSYS
System Outputs Delay After TCK Low3
Min
Max
20
4
4
4
5
4
0
1
Unit
ns
ns
ns
ns
ns
TCK
10
12
ns
ns
System Inputs= DATA31–0, ARDY, TMR2–0, PF47–0, PPIx_CLK, RSCLK0–1, RFS0–1, DR0PRI, DR0SEC, TSCLK0–1, TFS0–1, DR1PRI, DR1SEC, MOSI, MISO, SCK, RX,
RESET, NMI0 and NMI1, BMODE1–0, BR, PPIxD7–0.
2
50 MHz maximum
3
System Outputs = DATA31–0, ADDR25–2, ABE3–0, AOE, ARE, AWE, AMS3–0, SRAS, SCAS, SWE, SCKE, CLKOUT, SA10, SMS3–0, PF47–0, RSCLK0–1, RFS0–1,
TSCLK0–1, TFS0–1, DT0PRI, DT0SEC, DT1PRI, DT1SEC, MOSI, MISO, SCK, TX, BG, BGH, PPIxD7–0.
tTCK
TCK
tSTAP
tHTAP
TMS
TDI
tDTDO
TDO
tSSYS
tHSYS
SYSTEM
INPUTS
tDSYS
SYSTEM
OUTPUTS
Figure 25. JTAG Port Timing
Rev. A |
Page 40 of 60 |
May 2006
ADSP-BF561
OUTPUT DRIVE CURRENTS
150
150
VDDEXT = 2.75V @ –40°C
VDDEXT = 2.50V @ 25°C
VDDEXT = 2.25V @ 95°C
SOURCE CURRENT (mA)
100
VDDEXT = 2.75V @ –40°C
VDDEXT = 2.50V @ 25°C
VDDEXT = 2.25V @ 95°C
100
SOURCE CURRENT (mA)
Figure 26 through Figure 33 show typical current voltage characteristics for the output drivers of the ADSP-BF561 processor.
The curves represent the current drive capability of the output
drivers as a function of output voltage. Refer to Table 8 on
Page 17 to identify the driver type for a pin.
50
0
VOH
–50
–100
VOL
50
–150
0
0
0.5
VOH
1.0
1.5
2.0
2.5
3.0
SOURCE VOLTAGE (V)
–50
Figure 28. Drive Current B (Low VDDEXT)
VOL
–100
VDDEXT = 3.65V @ –40°C
VDDEXT = 3.30V @ 25°C
VDDEXT = 2.95V @ 95°C
150
–150
0
0.5
1.0
1.5
2.0
2.5
3.0
100
SOURCE CURRENT (mA)
SOURCE VOLTAGE (V)
Figure 26. Drive Current A (Low VDDEXT)
150
VDDEXT = 3.65V @ –40°C
VDDEXT = 3.30V @ 25°C
VDDEXT = 2.95V @ 95°C
100
50
0
VOH
–50
VOL
–150
0
0
0.5
VOH
1.0
1.5
2.0
SOURCE VOLTAGE (V)
2.5
3.0
3.
–50
Figure 29. Drive Current B (High VDDEXT)
–100
VOL
60
VDDEXT = 2.75V @ –40°C
VDDEXT = 2.50V @ 25°C
VDDEXT = 2.25V @ 95°C
–150
0
0.5
1.0
1.5
2.0
2.5
3.0
40
3.5
SOURCE VOLTAGE (V)
20
Figure 27. Drive Current A (High VDDEXT)
SOURCE CURRENT (mA)
SOURCE CURRENT (mA)
–100
50
0
VOH
–20
–40
VOL
–60
0
0.5
1.0
1.5
2.0
SOURCE VOLTAGE (V)
Figure 30. Drive Current C (Low VDDEXT)
Rev. A |
Page 41 of 60 |
May 2006
2.5
3.0
ADSP-BF561
POWER DISSIPATION
100
80
60
SOURCE CURRENT (mA)
Total power dissipation has two components: one due to internal circuitry (PINT) and one due to the switching of external
output drivers (PEXT). Table 31 through Table 33 show the power
dissipation for internal circuitry (VDDINT).
VDDEXT = 3.65V @ –40°C
VDDEXT = 3.30V @ 25°C
V
= 2.95V @ 95°C
DDEXT
40
See the ADSP-BF561 Blackfin Processor Hardware Reference
Manual for definitions of the various operating modes and for
instructions on how to minimize system power.
20
0
VOH
–20
–40
VOL
–60
–80
–100
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
SOURCE VOLTAGE (V)
Many operating conditions can affect power dissipation. System
designers should refer to EE-293: Estimating Power for ADSPBF561 Blackfin Processors on the Analog Devices website
(www.analog.com)—use site search on “EE-293.” This document provides detailed information for optimizing your design
for lowest power.
Table 31. Internal Power Dissipation (Hibernate mode)
Figure 31. Drive Current C (High VDDEXT)
2
IDDHIBERNATE
100
VDDEXT = 2.75V @ –40°C
VDDEXT = 2.50V @ 25°C
VDDEXT = 2.25V @ 95°C
80
SOURCE CURRENT (mA)
60
1
2
40
0
Nominal assumes an operating temperature of 25°C.
Measured at VDDEXT = 3.65 V with voltage regulator off (VDDINT = 0 V).
VDDINT1
0.8
0.9
1.0
1.1
1.25
1.35
VOH
–20
–40
–60
VOL
–80
0
0.5
1.0
1.5
2.0
2.5
1
2
Figure 32. Drive Current D (Low VDDEXT)
150
Assumes VDDINT is regulated externally.
Nominal assumes an operating temperature of 25°C.
VDDINT2 @ fCCLK
0.8 @ 50 MHz
0.8 @ 250 MHz
0.9 @ 300 MHz
1.0 @ 350 MHz
1.1 @ 444 MHz
1.25 @ 500 MHz
1.35 @ 600 MHz
DDEXT
50
0
VOH
–50
1
VOL
–150
0.5
1.0
1.5
2.0
SOURCE VOLTAGE (V)
2.5
3.0
3.5
Figure 33. Drive Current D (High VDDEXT)
Rev. A |
IDD (nominal3)
66
144
194
249
346
469
588
Unit
mA
mA
mA
mA
mA
mA
mA
Processor executing 75% dual MAC, 25% ADD with moderate data bus activity.
Assumes VDDINT is regulated externally.
3
Nominal assumes an operating temperature of 25°C.
2
–100
0
Unit
mA
mA
mA
mA
mA
mA
Table 33. Internal Power Dissipation (Full On1 mode)
VDDEXT = 3.65V @ –40°C
VDDEXT = 3.30V @ 25°C
V
= 2.95V @ 95°C
100
IDD (nominal2)
32
40
50
62
84
95
3.0
SOURCE VOLTAGE (V)
SOURCE CURRENT (mA)
Unit
µA
Table 32. Internal Power Dissipation (Deep Sleep mode)
20
–100
IDD (nominal1)
50
Page 42 of 60 |
May 2006
ADSP-BF561
TEST CONDITIONS
Example System Hold Time Calculation
All timing parameters appearing in this data sheet were measured under the conditions described in this section. Figure 34
shows the measurement point for ac measurements (except output enable/disable). The measurement point VMEAS is 1.5 V for
VDDEXT (nominal) = 2.5 V/3.3 V.
To determine the data output hold time in a particular system,
first calculate tDECAY using the equation given above. Choose ∆V
to be the difference between the ADSP-BF561 processor’s output voltage and the input threshold for the device requiring the
hold time. CL is the total bus capacitance (per data line), and IL is
the total leakage or three-state current (per data line). The hold
time will be tDECAY plus the various output disable times as specified in the Timing Specifications on Page 22 (for example tDSDAT
for an SDRAM write cycle as shown in SDRAM Interface Timing on Page 26).
INPUT
OR
OUTPUT
VMEAS
VMEAS
Figure 34. Voltage Reference Levels for AC
Measurements (Except Output Enable/Disable)
REFERENCE
SIGNAL
Output Enable Time Measurement
tDIS_MEASURED
Output pins are considered to be enabled when they have made
a transition from a high impedance state to the point when they
start driving.
tDIS
VOH
(MEASURED)
The output enable time tENA is the interval from the point when a
reference signal reaches a high or low voltage level to the point
when the output starts driving as shown on the right side of
Figure 35 on Page 43.
tENA_MEASURED
tENA
VOL
(MEASURED)
VOH (MEASURED) ⴚ ⌬V
VOH(MEASURED)
VTRIP(HIGH)
VOL (MEASURED) + ⌬V
VTRIP(LOW)
VOL(MEASURED)
tDECAY
The time tENA_MEASURED is the interval, from when the reference signal switches, to when the output voltage reaches VTRIP(high) or
VTRIP(low). VTRIP(high) is 2.0 V and VTRIP(low) is 1.0 V for VDDEXT
(nominal) = 2.5 V/3.3 V. Time tTRIP is the interval from when the
output starts driving to when the output reaches the VTRIP(high)
or VTRIP(low) trip voltage.
tTRIP
OUTPUT STOPS DRIVING
OUTPUT STARTS DRIVING
HIGH IMPEDANCE STATE
Figure 35. Output Enable/Disable
Time tENA is calculated as shown in the equation:
50⍀
TO
OUTPUT
PIN
t ENA = t ENA_MEASURED – t TRIP
30pF
If multiple pins (such as the data bus) are enabled, the measurement value is that of the first pin to start driving.
Figure 36. Equivalent Device Loading for AC Measurements
(Includes All Fixtures)
Output Disable Time Measurement
Output pins are considered to be disabled when they stop driving, go into a high impedance state, and start to decay from their
output high or low voltage. The output disable time tDIS is the
difference between tDIS_MEASURED and tDECAY as shown on the left side
of Figure 35.
t DIS = t DIS_MEASURED – t DECAY
The time for the voltage on the bus to decay by ∆V is dependent
on the capacitive load CL and the load current IL. This decay time
can be approximated by the equation:
Capacitive Loading
Output delays and holds are based on standard capacitive loads:
30 pF on all pins (see Figure 36). VLOAD is 1.5 V for VDDEXT (nominal) = 2.5 V/3.3 V. Figure 37 on Page 44 through Figure 44 on
Page 45 show how output rise time varies with capacitance. The
delay and hold specifications given should be derated by a factor
derived from these figures. The graphs in these figures may not
be linear outside the ranges shown.
t DECAY = ( C L ∆V ) ⁄ I L
The time tDECAY is calculated with test loads CL and IL, and with
∆V equal to 0.5 V for VDDEXT (nominal) = 2.5 V/3.3 V.
The time tDIS_MEASURED is the interval from when the reference signal switches, to when the output voltage decays ∆V from the
measured output high or output low voltage.
Rev. A |
VLOAD
Page 43 of 60 |
May 2006
ADSP-BF561
CLKOUT (CLKOUT DRIVER), VDDEXT (MAX) = 3.65V, TEMPERATURE = 85°C
ABE_B[0] (133 MHz DRIVER), VDDEXT (MIN) = 2.25V, TEMPERATURE = 85°C
10
RISE AND FALL TIME ns (10% to 90%)
RISE AND FALL TIME ns (10% to 90%)
14
12
RISE TIME
10
FALL TIME
8
6
4
2
0
9
8
RISE TIME
7
6
FALL TIME
5
4
3
2
1
0
0
50
100
150
LOAD CAPACITANCE (pF)
200
250
Figure 37. Typical Rise and Fall Times (10% to 90%) versus Load Capacitance
for Driver A at VDDEXT (min)
0
ABE0 (133 MHz DRIVER), VDDEXT (MAX) = 3.65V, TEMPERATURE = 85°C
250
TMR0 (33 MHz DRIVER), VDDEXT (MIN) = 2.25V, TEMPERATURE = 85°C
RISE AND FALL TIME ns (10% to 90%)
RISE AND FALL TIME ns (10% to 90%)
200
30
10
RISE TIME
8
FALL TIME
6
4
2
25
RISE TIME
20
15
FALL TIME
10
5
0
50
100
150
LOAD CAPACITANCE (pF)
200
0
0
250
Figure 38. Typical Rise and Fall Times (10% to 90%) versus Load Capacitance
for Driver A at VDDEXT (max)
50
100
150
LOAD CAPACITANCE (pF)
200
250
Figure 41. Typical Rise and Fall Times (10% to 90%) versus Load Capacitance
for Driver C at VDDEXT (min)
CLKOUT (CLKOUT DRIVER), VDDEXT (MIN) = 2.25V, TEMPERATURE = 85°C
TMR0 (33 MHz DRIVER), VDDEXT (MAX) = 3.65V, TEMPERATURE = 85°C
12
20
RISE AND FALL TIME ns (10% to 90%)
RISE AND FALL TIME ns (10% to 90%)
100
150
LOAD CAPACITANCE (pF)
Figure 40. Typical Rise and Fall Times (10% to 90%) versus Load Capacitance
for Driver B at VDDEXT (max)
12
0
50
10
RISE TIME
8
FALL TIME
6
4
2
18
16
RISE TIME
14
12
FALL TIME
10
8
6
4
2
0
0
0
50
100
150
LOAD CAPACITANCE (pF)
200
250
Figure 39. Typical Rise and Fall Times (10% to 90%) versus Load Capacitance
for Driver B at VDDEXT (min)
Rev. A |
0
50
100
150
LOAD CAPACITANCE (pF)
200
250
Figure 42. Typical Rise and Fall Times (10% to 90%) versus Load Capacitance
for Driver C at VDDEXT (max)
Page 44 of 60 |
May 2006
ADSP-BF561
ENVIRONMENTAL CONDITIONS
SCK (66 MHz DRIVER), VDDEXT (MIN) = 2.25V, TEMPERATURE = 85°C
RISE AND FALL TIME ns (10% to 90%)
18
To determine the junction temperature on the application
printed circuit board use:
T J = T CASE + ( Ψ JT × P D )
16
14
RISE TIME
where:
12
TJ = junction temperature (ⴗC).
10
FALL TIME
TCASE = case temperature (ⴗC) measured by customer at top
center of package.
8
6
ΨJT = from Table 34 and Table 35.
4
PD = power dissipation (see Power Dissipation on Page 42 for
the method to calculate PD).
2
0
0
50
100
150
LOAD CAPACITANCE (pF)
200
250
Figure 43. Typical Rise and Fall Times (10% to 90%) versus Load Capacitance
for Driver D at VDDEXT (min)
RISE AND FALL TIME ns (10% to 90%)
RISE TIME
8
FALL TIME
Thermal resistance θJA in Table 34 and Table 35 is the figure of
merit relating to performance of the package and board in a
convective environment. θJMA represents the thermal resistance
under two conditions of airflow. θJB represents the heat
extracted from the periphery of the board. ΨJT represents the
correlation between TJ and TCASE. Values of θJB are provided for
package comparison and printed circuit board design
considerations.
6
4
2
0
50
where:
In Table 34 and Table 35, airflow measurements comply with
JEDEC standards JESD51–2 and JESD51–6, and the junctionto-board measurement complies with JESD51–8. The junctionto-case measurement complies with MIL-STD-883
(Method 1012.1). All measurements use a 2S2P JEDEC test
board.
12
0
T J = T A + ( θ JA × P D )
TA = ambient temperature (ⴗC).
SCK (66 MHz DRIVER), VDDEXT (MAX) = 3.65V, TEMPERATURE = 85°C
14
10
Values of θJA are provided for package comparison and printed
circuit board design considerations. θJA can be used for a first
order approximation of TJ by the equation:
100
150
LOAD CAPACITANCE (pF)
200
250
Figure 44. Typical Rise and Fall Times (10% to 90%) versus Load Capacitance
for Driver D at VDDEXT (max)
Table 34. Thermal Characteristics for BC-256 Package
Parameter
θJA
θJMA
θJMA
θJB
θJC
ΨJT
Condition
0 Linear m/s Airflow
1 Linear m/s Airflow
2 Linear m/s Airflow
Not Applicable
Not Applicable
0 Linear m/s Airflow
Typical
25.6
22.4
21.6
18.9
4.85
0.15
Unit
ⴗC/W
ⴗC/W
ⴗC/W
ⴗC/W
ⴗC/W
ⴗC/W
Table 35. Thermal Characteristics for B-297 Package
Parameter
θJA
θJMA
θJMA
θJB
θJC
ΨJT
Rev. A |
Page 45 of 60 |
May 2006
Condition
0 Linear m/s Airflow
1 Linear m/s Airflow
2 Linear m/s Airflow
Not Applicable
Not Applicable
0 Linear m/s Airflow
Typical
20.6
17.8
17.4
16.3
7.15
0.37
Unit
ⴗC/W
ⴗC/W
ⴗC/W
ⴗC/W
ⴗC/W
ⴗC/W
ADSP-BF561
256-BALL MBGA PINOUT
Table 36 lists the 256-Ball MBGA pinout by ball number.
Table 37 on Page 48 lists the 256-Ball MBGA pinout alphabetically by signal.
Table 36. 256-Ball MBGA Pin Assignment (Numerically by Ball Number)
Ball No. Signal
A01
VDDEXT
A02
ADDR24
A03
ADDR20
A04
VDDEXT
A05
ADDR14
A06
ADDR10
A07
AMS3
A08
AWE
A09
VDDEXT
A10
SMS3
A11
SCLK0/CLKOUT
A12
SCLK1
A13
BG
A14
ABE2/SDQM2
A15
ABE3/SDQM3
A16
VDDEXT
B01
PPI1CLK
B02
ADDR22
B03
ADDR18
B04
ADDR16
B05
ADDR12
B06
VDDEXT
B07
AMS1
B08
ARE
B09
SMS1
B10
SCKE
B11
VDDEXT
B12
BR
B13
ABE1/SDQM1
B14
ADDR06
B15
ADDR04
B16
DATA0
C01
PPI0SYNC2/TMR9
C02
PPI0CLK
C03
ADDR25
C04
ADDR19
C05
GND
C06
ADDR11
C07
AOE
C08
AMS0
Ball No. Signal
C09
SMS2
C10
SRAS
C11
GND
C12
BGH
C13
GND
C14
ADDR07
C15
DATA1
C16
DATA3
D01
PPI0D13/PF45
D02
PPI0D15/PF47
D03
PPI0SYNC3
D04
ADDR23
D05
GND
D06
GND
D07
ADDR09
D08
GND
D09
ARDY
D10
SCAS
D11
SA10
D12
VDDEXT
D13
ADDR02
D14
GND
D15
DATA5
D16
DATA6
E01
GND
E02
PPI0D11/PF43
E03
PPI0D12/PF44
E04
PPI0SYNC1/TMR8
E05
ADDR15
E06
ADDR13
E07
AMS2
E08
VDDINT
E09
SMS0
E10
SWE
E11
ABE0/SDQM0
E12
DATA2
E13
GND
E14
DATA4
E15
DATA7
E16
VDDEXT
Ball No. Signal
F01
CLKIN
F02
VDDEXT
F03
RESET
F04
PPI0D10/PF42
F05
ADDR21
F06
ADDR17
F07
VDDINT
F08
GND
F09
VDDINT
F10
GND
F11
ADDR08
F12
DATA10
F13
DATA8
F14
DATA12
F15
DATA9
F16
DATA11
G01
XTAL
G02
GND
G03
VDDEXT
G04
BYPASS
G05
PPI0D14/PF46
G06
GND
G07
GND
G08
GND
G09
VDDINT
G10
ADDR05
G11
ADDR03
G12
DATA15
G13
DATA14
G14
GND
G15
DATA13
G16
VDDEXT
H01
GND
H02
GND
H03
PPI0D9/PF41
H04
PPI0D7
H05
PPI0D5
H06
VDDINT
H07
VDDINT
H08
GND
Rev. A |
Page 46 of 60 |
Ball No. Signal
Ball No. Signal
H09
GND
L01
PPI0D0
H10
GND
L02
PPI1SYNC2/TMR11
H11
VDDINT
L03
GND
H12
DATA16
L04
PPI1SYNC3
H13
DATA18
L05
VDDEXT
H14
DATA20
L06
PPI1D11/PF35
H15
DATA17
L07
GND
H16
DATA19
L08
VDDINT
J01
VROUT0
L09
GND
J02
VROUT1
L10
VDDEXT
J03
PPI0D2
L11
GND
J04
PPI0D3
L12
DR0PRI
J05
PPI0D1
L13
TFS0/PF16
J06
VDDEXT
L14
GND
J07
GND
L15
DATA27
J08
VDDINT
L16
DATA29
J09
VDDINT
M01
PPI1D15/PF39
J10
VDDINT
M02
PPI1D13/PF37
J11
GND
M03
PPI1D9/PF33
J12
DATA30
M04
GND
J13
DATA22
M05
NC
J14
GND
M06
PF3/SPISEL3/TMR3
J15
DATA21
M07
PF7/SPISEL7/TMR7
J16
DATA23
M08
VDDINT
K01
PPI0D6
M09
GND
K02
PPI0D4
M10
BMODE0
K03
PPI0D8/PF40
M11
SCK
K04
PPI1SYNC1/TMR10 M12
DR1PRI
K05
PPI1D14/PF38
M13
NC
K06
VDDEXT
M14
VDDEXT
K07
GND
M15
DATA31
K08
VDDINT
M16
DT0PRI/PF18
K09
GND
N01
PPI1D12/PF36
K10
GND
N02
PPI1D10/PF34
K11
VDDINT
N03
PPI1D3
K12
DATA28
N04
PPI1D1
K13
DATA26
N05
PF1/SPISEL1/TMR1
K14
DATA24
N06
PF9
K15
DATA25
N07
GND
K16
VDDEXT
N08
PF13
May 2006
ADSP-BF561
Table 36. 256-Ball MBGA Pin Assignment (Numerically by Ball Number) (Continued)
Ball No. Signal
N09
TDO
N10
BMODE1
N11
MOSI
N12
GND
N13
RFS1/PF24
N14
GND
N15
DT0SEC/PF17
N16
TSCLK0/PF29
P01
PPI1D8/PF32
P02
GND
P03
PPI1D5
P04
PF0/SPISS/TMR0
Ball No. Signal
Ball No. Signal
Ball No. Signal
Ball No. Signal
P05
GND
R01
PPI1D7
R13
TX/PF26
T09
TCK
P06
PF5/SPISEL5/TMR5 R02
PPI1D6
R14
TSCLK1/PF31
T10
TMS
P07
PF11
R03
PPI1D2
R15
DT1PRI/PF23
T11
SLEEP
P08
PF15/EXTCLK
R04
PPI1D0
R16
RFS0/PF19
T12
VDDEXT
P09
GND
R05
PF4/SPISEL4/TMR4 T01
VDDEXT
T13
RX/PF27
P10
TRST
R06
PF8
T02
PPI1D4
T14
DR1SEC/PF25
P11
NMI0
R07
PF10
T03
VDDEXT
T15
DT1SEC/PF22
P12
GND
R08
PF14
T04
PF2/SPISEL2/TMR2 T16
VDDEXT
P13
RSCLK1/PF30
R09
NMI1
T05
PF6/SPISEL6/TMR6
P14
TFS1/PF21
R10
TDI
T06
VDDEXT
P15
RSCLK0/PF28
R11
EMU
T07
PF12
P16
DR0SEC/PF20
R12
MISO
T08
VDDEXT
Rev. A |
Page 47 of 60 |
May 2006
ADSP-BF561
Table 37. 256-Ball MBGA Pin Assignment (Alphabetically by Signal)
Signal
ABE0/SDQM0
ABE1/SDQM1
ABE2/SDQM2
ABE3/SDQM3
ADDR02
ADDR03
ADDR04
ADDR05
ADDR06
ADDR07
ADDR08
ADDR09
ADDR10
ADDR11
ADDR12
ADDR13
ADDR14
ADDR15
ADDR16
ADDR17
ADDR18
ADDR19
ADDR20
ADDR21
ADDR22
ADDR23
ADDR24
ADDR25
AMS0
AMS1
AMS2
AMS3
AOE
ARDY
ARE
AWE
BG
BGH
BMODE0
BMODE1
Ball No.
E11
B13
A14
A15
D13
G11
B15
G10
B14
C14
F11
D07
A06
C06
B05
E06
A05
E05
B04
F06
B03
C04
A03
F05
B02
D04
A02
C03
C08
B07
E07
A07
C07
D09
B08
A08
A13
C12
M10
N10
Signal
BR
BYPASS
CLKIN
DATA0
DATA1
DATA2
DATA3
DATA4
DATA5
DATA6
DATA7
DATA8
DATA9
DATA10
DATA11
DATA12
DATA13
DATA14
DATA15
DATA16
DATA17
DATA18
DATA19
DATA20
DATA21
DATA22
DATA23
DATA24
DATA25
DATA26
DATA27
DATA28
DATA29
DATA30
DATA31
DR0PRI
DR0SEC/PF20
DR1PRI
DR1SEC/PF25
DT0PRI/PF18
Ball No.
B12
G04
F01
B16
C15
E12
C16
E14
D15
D16
E15
F13
F15
F12
F16
F14
G15
G13
G12
H12
H15
H13
H16
H14
J15
J13
J16
K14
K15
K13
L15
K12
L16
J12
M15
L12
P16
M12
T14
M16
Rev. A |
Signal
DT0SEC/PF17
DT1PRI/PF23
DT1SEC/PF22
EMU
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
Page 48 of 60 |
May 2006
Ball No.
N15
R15
T15
R11
C05
C11
C13
D05
D06
D08
D14
E01
E13
F08
F10
G02
G06
G07
G08
G14
H01
H02
H08
H09
H10
J07
J11
J14
K07
K09
K10
L03
L07
L09
L11
L14
M04
M09
N07
N12
Signal
GND
GND
GND
GND
GND
MISO
MOSI
NC
NC
NMI0
NMI1
PF0/SPISS/TMR0
PF1/SPISEL1/TMR1
PF2/SPISEL2/TMR2
PF3/SPISEL3/TMR3
PF4/SPISEL4/TMR4
PF5/SPISEL5/TMR5
PF6/SPISEL6/TMR6
PF7/SPISEL7/TMR7
PF8
PF9
PF10
PF11
PF12
PF13
PF14
PF15/EXTCLK
PPI0CLK
PPI0D0
PPI0D1
PPI0D2
PPI0D3
PPI0D4
PPI0D5
PPI0D6
PPI0D7
PPI0D8/PF40
PPI0D9/PF41
PPI0D10/PF42
PPI0D11/PF43
Ball No.
N14
P02
P05
P09
P12
R12
N11
M05
M13
P11
R09
P04
N05
T04
M06
R05
P06
T05
M07
R06
N06
R07
P07
T07
N08
R08
P08
C02
L01
J05
J03
J04
K02
H05
K01
H04
K03
H03
F04
E02
ADSP-BF561
Table 37. 256-Ball MBGA Pin Assignment (Alphabetically by Signal) (Continued)
Signal
PPI0D12/PF44
PPI0D13/PF45
PPI0D14/PF46
PPI0D15/PF47
PPI0SYNC1/TMR8
PPI0SYNC2/TMR9
PPI0SYNC3
PPI1CLK
PPI1D0
PPI1D1
PPI1D2
PPI1D3
PPI1D4
PPI1D5
PPI1D6
PPI1D7
PPI1D8/PF32
PPI1D9/PF33
PPI1D10/PF34
PPI1D11/PF35
PPI1D12/PF36
PPI1D13/PF37
PPI1D14/PF38
PPI1D15/PF39
Ball No.
E03
D01
G05
D02
E04
C01
D03
B01
R04
N04
R03
N03
T02
P03
R02
R01
P01
M03
N02
L06
N01
M02
K05
M01
Signal
PPI1SYNC1/TMR10
PPI1SYNC2/TMR11
PPI1SYNC3
RESET
RFS0/PF19
RFS1/PF24
RSCLK0/PF28
RSCLK1/PF30
RX/PF27
SA10
SCAS
SCK
SCKE
SCLK0/CLKOUT
SCLK1
SLEEP
SMS0
SMS1
SMS2
SMS3
SRAS
SWE
TCK
TDI
Rev. A |
Ball No.
K04
L02
L04
F03
R16
N13
P15
P13
T13
D11
D10
M11
B10
A11
A12
T11
E09
B09
C09
A10
C10
E10
T09
R10
Signal
TDO
TFS0/PF16
TFS1/PF21
TMS
TRST
TSCLK0/PF29
TSCLK1/PF31
TX/PF26
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
Page 49 of 60 |
May 2006
Ball No.
N09
L13
P14
T10
P10
N16
R14
R13
A01
A04
A09
A16
B06
B11
D12
E16
F02
G03
G16
J06
K06
K16
L05
L10
Signal
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VROUT0
VROUT1
XTAL
Ball No.
M14
T01
T03
T06
T08
T12
T16
E08
F07
F09
G09
H06
H07
H11
J08
J09
J10
K08
K11
L08
M08
J01
J02
G01
ADSP-BF561
Figure 45 lists the top view of the 256-Ball MBGA ball configuration. Figure 46 lists the bottom view of the 256-Ball MBGA
ball configuration.
A1 BALL
PAD CORNER
A
KEY:
B
C
D
VDDINT
GND
NC
VDDEXT
I/O
VROUT
E
F
G
H
J
K
L
M
N
P
R
T
1
2
3
4
5
6
7
8
TOP VIEW
9
10
11
12
13
14
15
16
Figure 45. 256-Ball MBGA Ball Configuration (Top View)
A1 BALL
PAD CORNER
A
KEY:
B
C
VDDINT
GND
NC
I/O
D
VDDEXT
VROUT
E
F
G
H
J
K
L
M
N
P
R
T
16
15
14
13
12
11
10 9
8
7
BOTTOM VIEW
6
5
4
3
2
1
Figure 46. 256-Ball MBGA Ball Configuration (Bottom View)
Rev. A |
Page 50 of 60 |
May 2006
ADSP-BF561
297-BALL PBGA PINOUT
Table 38 lists the 297-Ball PBGA pinout numerically by ball
number. Table 39 on Page 53 lists the 297-Ball PBGA pinout
alphabetically by signal.
Table 38. 297-Ball PBGA Pin Assignment (Numerically by Ball Number)
Ball No.
A01
A02
A03
A04
A05
A06
A07
A08
A09
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
A26
B01
B02
B03
B04
B05
B06
B07
B08
B09
B10
B11
B12
B13
B14
Signal
GND
ADDR25
ADDR23
ADDR21
ADDR19
ADDR17
ADDR15
ADDR13
ADDR11
ADDR09
AMS3
AMS1
AWE
ARE
SMS0
SMS2
SRAS
SCAS
SCLK0/CLKOUT
SCLK1
BGH
ABE0/SDQM0
ABE2/SDQM2
ADDR08
ADDR06
GND
PPI1CLK
GND
ADDR24
ADDR22
ADDR20
ADDR18
ADDR16
ADDR14
ADDR12
ADDR10
AMS2
AMS0
AOE
ARDY
Ball No.
B15
B16
B17
B18
B19
B20
B21
B22
B23
B24
B25
B26
C01
C02
C03
C04
C05
C22
C23
C24
C25
C26
D01
D02
D03
D04
D23
D24
D25
D26
E01
E02
E03
E24
E25
E26
F01
F02
F25
F26
Signal
SMS1
SMS3
SCKE
SWE
SA10
BR
BG
ABE1/SDQM1
ABE3/SDQM3
ADDR07
GND
ADDR05
PPI0SYNC3
PPI0CLK
GND
GND
GND
GND
GND
GND
ADDR04
ADDR03
PPI0SYNC1/TMR8
PPI0SYNC2/TMR9
GND
GND
GND
GND
ADDR02
DATA1
PPI0D15/PF47
PPI0D14/PF46
GND
GND
DATA0
DATA3
PPI0D13/PF45
PPI0D12/PF44
DATA2
DATA5
Rev. A |
Ball No.
G01
G02
G25
G26
H01
H02
H25
H26
J01
J02
J10
J11
J12
J13
J14
J15
J16
J17
J18
J25
J26
K01
K02
K10
K11
K12
K13
K14
K15
K16
K17
K18
K25
K26
L01
L02
L10
L11
L12
L13
Page 51 of 60 |
Signal
PPI0D11/PF43
PPI0D10/PF42
DATA4
DATA7
BYPASS
RESET
DATA6
DATA9
CLKIN
GND
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDINT
VDDINT
VDDINT
DATA8
DATA11
XTAL
NC
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDINT
VDDINT
VDDINT
DATA10
DATA13
NC
NC
VDDEXT
GND
GND
GND
May 2006
Ball No.
L14
L15
L16
L17
L18
L25
L26
M01
M02
M10
M11
M12
M13
M14
M15
M16
M17
M18
M25
M26
N01
N02
N10
N11
N12
N13
N14
N15
N16
N17
N18
N25
N26
P01
P02
P10
P11
P12
P13
P14
Signal
GND
GND
GND
GND
VDDINT
DATA12
DATA15
VROUT0
GND
VDDEXT
GND
GND
GND
GND
GND
GND
GND
VDDINT
DATA14
DATA17
VROUT1
PPI0D9/PF41
VDDEXT
GND
GND
GND
GND
GND
GND
GND
VDDINT
DATA16
DATA19
PPI0D7
PPI0D8/PF40
VDDEXT
GND
GND
GND
GND
ADSP-BF561
Table 38. 297-Ball PBGA Pin Assignment (Numerically by Ball Number) (Continued)
Ball No.
P15
P16
P17
P18
P25
P26
R01
R02
R10
R11
R12
R13
R14
R15
R16
R17
R18
R25
R26
T01
T02
T10
T11
T12
T13
T14
T15
T16
T17
T18
T25
T26
U01
U02
U10
Signal
GND
GND
GND
VDDINT
DATA18
DATA21
PPI0D5
PPI0D6
VDDEXT
GND
GND
GND
GND
GND
GND
GND
VDDINT
DATA20
DATA23
PPI0D3
PPI0D4
VDDEXT
GND
GND
GND
GND
GND
GND
GND
VDDINT
DATA22
DATA25
PPI0D1
PPI0D2
VDDEXT
Ball No.
U11
U12
U13
U14
U15
U16
U17
U18
U25
U26
V01
V02
V25
V26
W01
W02
W25
W26
Y01
Y02
Y25
Y26
AA01
AA02
AA25
AA26
AB01
AB02
AB03
AB24
AB25
AB26
AC01
AC02
AC03
Signal
VDDEXT
VDDEXT
VDDEXT
GND
VDDINT
VDDINT
VDDINT
VDDINT
DATA24
DATA27
PPI1SYNC3
PPI0D0
DATA26
DATA29
PPI1SYNC1/TMR10
PPI1SYNC2/TMR11
DATA28
DATA31
PPI1D15/PF39
PPI1D14/PF38
DATA30
DT0PRI/PF18
PPI1D13/PF37
PPI1D12/PF36
DT0SEC/PF17
TSCLK0/PF29
PPI1D11/PF35
PPI1D10/PF34
GND
GND
TFS0/PF16
DR0PRI
PPI1D9/PF33
PPI1D8/PF32
GND
Rev. A |
Ball No.
AC04
AC23
AC24
AC25
AC26
AD01
AD02
AD03
AD04
AD05
AD22
AD23
AD24
AD25
AD26
AE01
AE02
AE03
AE04
AE05
AE06
AE07
AE08
AE09
AE10
AE11
AE12
AE13
AE14
AE15
AE16
AE17
AE18
AE19
AE20
Page 52 of 60 |
Signal
GND
GND
GND
DR0SEC/PF20
RFS0/PF19
PPI1D7
PPI1D6
GND
GND
GND
GND
GND
GND
NC
RSCLK0/PF28
PPI1D5
GND
PPI1D3
PPI1D1
PF0/SPISS/TMR0
PF2/SPISEL2/TMR2
PF4/SPISEL4/TMR4
PF6/SPISEL6/TMR6
PF8
PF10
PF12
PF14
NC
TDO
TRST
EMU
BMODE1
BMODE0
MISO
MOSI
May 2006
Ball No.
AE21
AE22
AE23
AE24
AE25
AE26
AF01
AF02
AF03
AF04
AF05
AF06
AF07
AF08
AF09
AF10
AF11
AF12
AF13
AF14
AF15
AF16
AF17
AF18
AF19
AF20
AF21
AF22
AF23
AF24
AF25
AF26
Signal
RX/PF27
RFS1/PF24
DR1SEC/PF25
TFS1/PF21
GND
NC
GND
PPI1D4
PPI1D2
PPI1D0
PF1/SPISEL1/TMR1
PF3/SPISEL3/TMR3
PF5/SPISEL5/TMR5
PF7/SPISEL7/TMR7
PF9
PF11
PF13
PF15/EXT CLK
NMI1
TCK
TDI
TMS
SLEEP
NMI0
SCK
TX/PF26
RSCLK1/PF30
DR1PRI
TSCLK1/PF31
DT1SEC/PF22
DT1PRI/PF23
GND
ADSP-BF561
Table 39. 297-Ball PBGA Pin Assignment (Alphabetically by Signal)
Signal
ABE0/SDQM0
ABE1/SDQM1
ABE2/SDQM2
ABE3/SDQM3
ADDR02
ADDR03
ADDR04
ADDR05
ADDR06
ADDR07
ADDR08
ADDR09
ADDR10
ADDR11
ADDR12
ADDR13
ADDR14
ADDR15
ADDR16
ADDR17
ADDR18
ADDR19
ADDR20
ADDR21
ADDR22
ADDR23
ADDR24
ADDR25
AMS0
AMS1
AMS2
AMS3
AOE
ARDY
ARE
AWE
BG
BGH
BMODE0
BMODE1
Ball No.
A22
B22
A23
B23
D25
C26
C25
B26
A25
B24
A24
A10
B10
A09
B09
A08
B08
A07
B07
A06
B06
A05
B05
A04
B04
A03
B03
A02
B12
A12
B11
A11
B13
B14
A14
A13
B21
A21
AE18
AE17
Signal
BR
BYPASS
CLKIN
DATA0
DATA1
DATA2
DATA3
DATA4
DATA5
DATA6
DATA7
DATA8
DATA9
DATA10
DATA11
DATA12
DATA13
DATA14
DATA15
DATA16
DATA17
DATA18
DATA19
DATA20
DATA21
DATA22
DATA23
DATA24
DATA25
DATA26
DATA27
DATA28
DATA29
DATA30
DATA31
DR0PRI
DR0SEC/PF20
DR1PRI
DR1SEC/PF25
DT0PRI/PF18
Rev. A |
Ball No.
B20
H01
J01
E25
D26
F25
E26
G25
F26
H25
G26
J25
H26
K25
J26
L25
K26
M25
L26
N25
M26
P25
N26
R25
P26
T25
R26
U25
T26
V25
U26
W25
V26
Y25
W26
AB26
AC25
AF22
AE23
Y26
Page 53 of 60 |
Signal
DT0SEC/PF17
DT1PRI/PF23
DT1SEC/PF22
EMU
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
May 2006
Ball No.
AA25
AF25
AF24
AE16
A01
A26
B02
B25
C03
C04
C05
C22
C23
C24
D03
D04
D23
D24
E03
E24
J02
L11
L12
L13
L14
L15
L16
L17
M02
M11
M12
M13
M14
M15
M16
M17
N11
N12
N13
N14
Signal
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
Ball No.
N15
N16
N17
P11
P12
P13
P14
P15
P16
P17
R11
R12
R13
R14
R15
R16
R17
T11
T12
T13
T14
T15
T16
T17
U14
AB03
AB24
AC03
AC04
AC23
AC24
AD03
AD04
AD05
AD22
AD23
AD24
AE02
AE25
AF01
ADSP-BF561
Table 39. 297-Ball PBGA Pin Assignment (Alphabetically by Signal) (Continued)
Signal
GND
MISO
MOSI
NC
NC
NC
NC
NC
NC
NMI0
NMI1
PF0/SPISS/TMR0
PF1/SPISEL1/TMR1
PF2/SPISEL2/TMR2
PF3/SPISEL3/TMR3
PF4/SPISEL4/TMR4
PF5/SPISEL5/TMR5
PF6/SPISEL6/TMR6
PF7/SPISEL7/TMR7
PF8
PF9
PF10
PF11
PF12
PF13
PF14
PF15/EXT CLK
PPI0CLK
PPI0D0
PPI0D1
PPI0D2
PPI0D3
PPI0D4
PPI0D5
PPI0D6
Ball No.
AF26
AE19
AE20
K02
L01
L02
AD25
AE13
AE26
AF18
AF13
AE05
AF05
AE06
AF06
AE07
AF07
AE08
AF08
AE09
AF09
AE10
AF10
AE11
AF11
AE12
AF12
C02
V02
U01
U02
T01
T02
R01
R02
Signal
PPI0D7
PPI0D8/PF40
PPI0D9/PF41
PPI0D10/PF42
PPI0D11/PF43
PPI0D12/PF44
PPI0D13/PF45
PPI0D14/PF46
PPI0D15/PF47
PPI0SYNC1/TMR8
PPI0SYNC2/TMR9
PPI0SYNC3
PPI1CLK
PPI1D0
PPI1D1
PPI1D2
PPI1D3
PPI1D4
PPI1D5
PPI1D6
PPI1D7
PPI1D8/PF32
PPI1D9/PF33
PPI1D10/PF34
PPI1D11/PF35
PPI1D12/PF36
PPI1D13/PF37
PPI1D14/PF38
PPI1D15/PF39
PPI1SYNC1/TMR10
PPI1SYNC2/TMR11
PPI1SYNC3
RESET
RFS0/PF19
RFS1/PF24
Rev. A |
Ball No.
P01
P02
N02
G02
G01
F02
F01
E02
E01
D01
D02
C01
B01
AF04
AE04
AF03
AE03
AF02
AE01
AD02
AD01
AC02
AC01
AB02
AB01
AA02
AA01
Y02
Y01
W01
W02
V01
H02
AC26
AE22
Page 54 of 60 |
Signal
RSCLK0/PF28
RSCLK1/PF30
RX/PF27
SA10
SCAS
SCK
SCKE
SCLK0/CLKOUT
SCLK1
SLEEP
SMS0
SMS1
SMS2
SMS3
SRAS
SWE
TCK
TDI
TDO
TFS0/PF16
TFS1/PF21
TMS
TRST
TSCLK0/PF29
TSCLK1/PF31
TX/PF26
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
May 2006
Ball No.
AD26
AF21
AE21
B19
A18
AF19
B17
A19
A20
AF17
A15
B15
A16
B16
A17
B18
AF14
AF15
AE14
AB25
AE24
AF16
AE15
AA26
AF23
AF20
J10
J11
J12
J13
J14
J15
K10
K11
K12
Signal
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDEXT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VDDINT
VROUT0
VROUT1
XTAL
Ball No.
K13
K14
K15
L10
M10
N10
P10
R10
T10
U10
U11
U12
U13
J16
J17
J18
K16
K17
K18
L18
M18
N18
P18
R18
T18
U15
U16
U17
U18
M01
N01
K01
ADSP-BF561
Figure 47 lists the top view of the 297-Ball PBGA ball configuration. Figure 48 lists the bottom view of the 297-Ball PBGA ball
configuration.
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
T
U
V
W
Y
AA
AB
AC
AD
AE
AF
KEY:
VDDINT
GND
NC
VDDEXT
I/O
VROUT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
TOP VIEW
Figure 47. 297-Ball PBGA Ball Configuration (Top View)
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
T
U
V
W
Y
AA
AB
AC
AD
AE
AF
KEY:
VDDINT
GND
NC
VDDEXT
I/O
VROUT
26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
BOTTOM VIEW
Figure 48. 297-Ball PBGA Ball Configuration (Bottom View)
Rev. A |
Page 55 of 60 |
May 2006
ADSP-BF561
OUTLINE DIMENSIONS
Dimensions in the outline dimension figures are shown in
millimeters.
12.00 BSC SQ
9.75 BSC SQ
0.65 BSC
BALL PITCH
A1 BALL
PAD CORNER
A1 BALL
PAD CORNER
CL
A
B
C
D
E
F
G
H
CL
J
K
L
M
N
P
R
T
16 15 14 13 12 11 10
TOP VIEW
1.70
1.51
1.36
9
8
7
6
5
4
3
2
1
BOTTOM VIEW
0.25 MIN
DETAIL A
SIDE VIEW
0.10 MAX
COPLANARITY
NOTES
1. DIMENSIONS ARE IN MILLIMETERS.
2. COMPLIES WITH JEDEC REGISTERED OUTLINE
MO-225, WITH NO EXACT PACKAGE SIZE AND
EXCEPTION TO PACKAGE HEIGHT.
3. MINIMUM BALL HEIGHT 0.25
0.45
BALL DIAMETER 0.40
0.35
DETAIL A
Figure 49. 256-Ball Mini-Ball Grid Array (BC-256)
Rev. A |
Page 56 of 60 |
May 2006
SEATING PLANE
ADSP-BF561
27.00 BSC SQ
25.00 BSC SQ
A1 BALL
PAD CORNER
A1 BALL
PAD CORNER
8.00
CL
1.00 BSC
BALL PITCH
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
T
U
V
W
Y
AA
AB
AC
AD
AE
AF
CL
26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
TOP VIEW
2.43
2.23
2.03
8.00
BOTTOM VIEW
0.40 MIN
DETAIL A
SIDE VIEW
0.20 MAX
COPLANARITY
NOTES
1. DIMENSIONS ARE IN MILLIMETERS.
2. COMPLIES WITH JEDEC REGISTERED OUTLINE
MS-034, VARIATION AAL-1.
3. MINIMUM BALL HEIGHT 0.40
0.70
BALL DIAMETER 0.60
0.50
SEATING PLANE
DETAIL A
Figure 50. 297-Ball PBGA Grid Array (B-297)
SURFACE MOUNT DESIGN
Table 40 is provided as an aid to PCB design. For industrystandard design recommendations, refer to IPC-7351, Generic
Requirements for Surface Mount Design and Land Pattern
Standard.
Table 40. BGA Data for Use with Surface Mount Design
Package
256-Ball Mini-Ball Grid Array (BC-256)
297-Ball PBGA Grid Array (B-297)
Ball Attach Type
Solder Mask Defined
Solder Mask Defined
Rev. A |
Page 57 of 60 |
Solder Mask Opening
0.30 mm diameter
0.43 mm diameter
May 2006
Ball Pad Size
0.43 mm diameter
0.58 mm diameter
ADSP-BF561
ORDERING GUIDE
Temperature
Model
Range1
Package Description
2
ADSP-BF561SKBCZ600 0°C to +70°C 256-Ball Chip Scale Package Ball Grid Array
(Mini-BGA)
ADSP-BF561SKBCZ5002 0°C to +70°C 256-Ball Chip Scale Package Ball Grid Array
(Mini-BGA)
ADSP-BF561SKB500
0°C to +70°C 297-Ball Plastic Ball Grid Array (PBGA)
ADSP-BF561SKB600
0°C to +70°C 297-Ball Plastic Ball Grid Array (PBGA)
ADSP-BF561SKBZ5002 0°C to +70°C 297-Ball Plastic Ball Grid Array (PBGA)
ADSP-BF561SKBZ6002 0°C to +70°C 297-Ball Plastic Ball Grid Array (PBGA)
ADSP-BF561SBB600
–40°C to +85°C 297-Ball Plastic Ball Grid Array (PBGA)
ADSP-BF561SBB500
–40°C to +85°C 297-Ball Plastic Ball Grid Array (PBGA)
ADSP-BF561SBBZ6002 –40°C to +85°C 297-Ball Plastic Ball Grid Array (PBGA)
ADSP-BF561SBBZ5002 –40°C to +85°C 297-Ball Plastic Ball Grid Array (PBGA)
ADSP-BF561WBBZ-5A2, 3 –40°C to +85°C 297-Ball Plastic Ball Grid Array (PBGA)
Package Instruction Operating Voltage
Option Rate (Max) (Nom)
BC-256 600 MHz
1.25 V Internal, 2.5 V or 3.3 V I/O
BC-256
500 MHz
1.25 V Internal, 2.5 V or 3.3 V I/O
B-297
B-297
B-297
B-297
B-297
B-297
B-297
B-297
B-297
500 MHz
600 MHz
500 MHz
600 MHz
600 MHz
500 MHz
600 MHz
500 MHz
500 MHz
1.25 V Internal, 2.5 V or 3.3 V I/O
1.35 V Internal, 2.5 V or 3.3 V I/O
1.25 V Internal, 2.5 V or 3.3 V I/O
1.35 V Internal, 2.5 V or 3.3 V I/O
1.35 V Internal, 2.5 V or 3.3 V I/O
1.25 V Internal, 2.5 V or 3.3 V I/O
1.35 V Internal, 2.5 V or 3.3 V I/O
1.25 V Internal, 2.5 V or 3.3 V I/O
1.2 V Internal, 2.5 V or 3.3 V I/O
1
Referenced temperature is ambient temperature.
Z = Pb-free part.
3
Automotive grade part.
2
Rev. A |
Page 58 of 60 |
May 2006
ADSP-BF561
Rev. A |
Page 59 of 60 |
May 2006
ADSP-BF561
© 2006 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D04696-0-5/06(A)
Rev. A |
Page 60 of 60 |
May 2006