a Dual Bootstrapped MOSFET Driver ADP3416 FEATURES All-In-One Synchronous Buck Driver Bootstrapped High Side Drive One PWM Signal Generates Both Drives Anticross-Conduction Protection Circuitry Pulse-by-Pulse Disable Control FUNCTIONAL BLOCK DIAGRAM VCC BST DRVH IN APPLICATIONS Mobile Computing CPU Core Power Converters Multiphase Desktop CPU Supplies Single-Supply Synchronous Buck Converters Standard-to-Synchronous Converter Adaptations OVERLAP PROTECTION CIRCUIT SW DRVL ADP3416 PGND GENERAL DESCRIPTION The ADP3416 is a dual MOSFET driver optimized for driving two N-channel MOSFETs which are the two switches in a nonisolated synchronous buck power converter. One of the drivers can be bootstrapped and is designed to handle the high voltage slew rate associated with “floating” high side gate drivers. The ADP3416 includes overlapping drive protection (ODP) to prevent shoot-through current in the external MOSFETs. The ADP3416 is specified over the commercial temperature range of 0°C to 70°C and is available in an 8-lead SOIC package. 12V 7V D1 VCC ADP3416 BST CBST DRVH IN Q1 SW DELAY 1V DRVL Q2 1V PGND Figure 1. General Application Circuit REV. A Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 www.analog.com Fax: 781/326-8703 © Analog Devices, Inc., 2002 ADP3416–SPECIFICATIONS1(T = 0C to 70C, VCC = 7 V, BST = 4 V to 26 V, unless otherwise noted.) A Parameter Symbol SUPPLY Supply Voltage Range Quiescent Current VCC ICCQ Conditions 2 7.5 5 V mA 0.8 V V trDRVH tfDRVH tpdhDRVH tpdlDRVH 3.0 2.0 2.0 1.0 25 20 65 25 5.0 4.0 4.0 2.5 40 30 90 35 Ω Ω Ω Ω ns ns ns ns trDRVL tfDRVL tpdhDRVL tpdlDRVL VCC = 5 V VCC = 7 V VCC = 5 V VCC = 7 V VCC = 7 V, CLOAD = 3 nF VCC = 7 V, CLOAD = 3 nF VCC = 7 V VCC = 7 V 3.0 2.0 2.0 1.0 25 20 30 15 5.0 4.0 4.0 2.5 40 30 40 25 Ω Ω Ω Ω ns ns ns ns LOW SIDE DRIVER Output Resistance, Sourcing Current Output Resistance, Sinking Current Propagation Delay3, 4 (See Figure 2) Unit VBST – VSW = 5 V VBST – VSW = 7 V VBST – VSW = 5 V VBST – VSW = 7 V VBST – VSW = 7 V, CLOAD = 3 nF VBST – VSW = 7 V, CLOAD = 3 nF VBST – VSW = 7 V VBST – VSW = 7 V Output Resistance, Sinking Current Transition Times3 (See Figure 2) Max 2.3 HIGH SIDE DRIVER Output Resistance, Sourcing Current Propagation Delay3, 4 (See Figure 2) Typ 4.15 PWM INPUT Input Voltage High2 Input Voltage Low2 Transition Times3 (See Figure 2) Min NOTES 1 All limits at temperature extremes are guaranteed via correlation using standard Statistical Quality Control (SQC) methods. 2 Logic inputs meet typical CMOS I/O conditions for source/sink current (~1 µA). 3 AC specifications are guaranteed by characterization but not production tested. 4 For propagation delays, “tpdh” refers to the specified signal going high; “tpdl” refers to it going low. Specifications subject to change without notice. –2– REV. A ADP3416 ABSOLUTE MAXIMUM RATINGS* ORDERING GUIDE VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +8 V BST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +30 V BST to SW . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +8 V SW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –5.0 V to +25 V IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to VCC + 0.3 V Operating Ambient Temperature Range . . . . . . . 0°C to 70°C Operating Junction Temperature Range . . . . . . 0°C to 125°C θJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155°C/W θJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40°C/W Storage Temperature Range . . . . . . . . . . . . –65°C to +150°C Lead Temperature (Soldering, 10 sec) . . . . . . . . . . . . . 300°C Model Temperature Package Range Description ADP3416JR 0°C to 70°C Package Option 8-Lead Standard Small Outline (SOIC) SOIC-8 PIN CONFIGURATION BST 1 8 IN 2 7 SW 6 PGND 5 DRVL NC 3 *This is a stress rating only; operation beyond these limits can cause the device to be permanently damaged. Unless otherwise specified, all voltages are referenced to PGND. VCC 4 ADP3416 TOP VIEW (Not To Scale) DRVH NC = NO CONNECT PIN FUNCTION DESCRIPTIONS Pin Mnemonic Function 1 BST 2 3 4 5 6 7 IN NC VCC DRVL PGND SW 8 DRVH Floating Bootstrap Supply for the Upper MOSFET. A capacitor connected between BST and SW Pins holds this bootstrapped voltage for the high side MOSFET as it is switched. The capacitor should be chosen between 100 nF and 1 F. TTL-level input signal that has primary control of the drive outputs. No Connection. Input Supply. This pin should be bypassed to PGND with ~1 µF ceramic capacitor. Synchronous Rectifier Drive. Output drive for the lower (synchronous rectifier) MOSFET. Power Ground. Should be closely connected to the source of the lower MOSFET. This pin is connected to the buck-switching node, close to the upper MOSFET’s source. It is the floating return for the upper MOSFET drive signal. It is also used to monitor the switched voltage to prevent turnon of the lower MOSFET until the voltage is below ~1 V. Thus, according to operating conditions, the high low transition delay is determined at this pin. Buck Drive. Output drive for the upper (buck) MOSFET. CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the ADP3416 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. REV. A –3– WARNING! ESD SENSITIVE DEVICE ADP3416 IN tpdlDRVL tfDRVL tpdlDRVH trDRVL DRVL tfDRVH tpdhDRVH DRVH-SW trDRVH VTH VTH tpdhDRVL SW 1V Figure 2. Nonoverlap Timing Diagram (Timing Is Referenced to the 90% and 10% Points Unless Otherwise Noted) –4– REV. A Typical Performance Characteristics— ADP3416 50 CLOAD = 3nF T TA = 25C VCC = 5V DRVH 5V/DIV R3 DRVH 5V/DIV DRVL 2V/DIV DRVL 5V/DIV R2 R2 2V/DIV 25 40ns/DIV TPC 2. DRVL Fall and DRVH Rise Times 35 32 DRVH @ VCC = 5V 45 DRVL @ VCC = 5V DRVL @ VCC = 7V 27 DRVH @ VCC = 7V DRVH @ VCC = 5V DRVH @ VCC = 7V 35 30 DRVL @ VCC = 5V 25 10 TIME – ns TIME – ns 20 20 22 17 DRVH @ VCC = 5V DRVL @ VCC = 7V DRVH @ VCC = 7V 12 5 15 0 25 50 75 100 JUNCTION TEMPERATURE – C DRVL @ VCC = 5V 10 1.0 125 TPC 4. DRVH and DRVL Fall Times vs. Temperature 2.0 3.0 4.0 LOAD CAPACITANCE – nF 5.0 TPC 5. DRVH and DRVL Rise Times vs. Load Capacitance 35 8.5 TA = 25C CLOAD = 3nF 8.0 25 VCC = 7V 20 15 VCC = 5V 10 5 SUPPLY CURRENT – mA 30 VCC = 7V 7.5 CLOAD = 3nF fIN = 250kHz 7.0 6.5 6.0 VCC = 5V 5.5 0 200 400 600 800 1000 1200 1400 IN FREQUENCY – kHz TPC 7. Supply Current vs. Frequency REV. A 125 37 40 TIME – ns 25 100 50 75 JUNCTION TEMPERATURE – C 50 30 15 0 TPC 3. DRVH and DRVL Rise Times vs. Temperature 55 DRVL @ VCC = 7V SUPPLY CURRENT – mA DRVL @ VCC = 7V R1 TPC 1. DRVH Fall and DRVL Rise Times 0 DRVL @ VCC = 5V 35 20 0 DRVH @ VCC = 7V 30 IN 2V/DIV 40ns/DIV 25 DRVH @ VCC = 5V 40 R3 IN R1 45 TA = 25C VCC = 5V TIME – ns T 5.0 0 100 25 50 75 JUNCTION TEMPERATURE – C TPC 8. Supply Current vs. Temperature –5– 125 7 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 LOAD CAPACITANCE – nF 5.0 TPC 6. DRVH and DRVL Fall Times vs. Load Capacitance ADP3416 THEORY OF OPERATION SW Pin to reach 1 V, the overlap protection circuit ensures that Q1 is OFF before Q2 turns on, regardless of variations in temperature, supply voltage, gate charge, and drive current. The ADP3416 is a dual MOSFET driver optimized for driving two N-channel MOSFETs in a synchronous buck converter topology. A single PWM input signal is all that is required to properly drive the high side and the low side FETs. Each driver is capable of driving a 3 nF load. To prevent the overlap of the gate drives during Q2’s turn OFF and Q1’s turn ON, the overlap circuit provides a internal delay that is set to 50 ns. When the PWM input signal goes high, Q2 will begin to turn OFF (after a propagation delay), but before Q1 can turn ON, the overlap protection circuit waits for the voltage at DRVL to drop to around 10% of VCC. Once the voltage at DRVL has reached the 10% point, the overlap protection circuit will wait for a 20 ns typical propagation delay. Once the delay period has expired, Q1 will begin turn ON. A more detailed description of the ADP3416 and its features follows. Refer to the Functional Block Diagram. Low Side Driver The low side driver is designed to drive low RDS(ON) N-channel MOSFETs. The maximum output resistance for the driver is 4 Ω for sourcing and 2.5 Ω for sinking gate current. The low output resistance allows the driver to have 40 ns rise and 30 ns fall times into a 3 nF load. The bias to the low side driver is internally connected to the VCC supply and PGND. APPLICATION INFORMATION Supply Capacitor Selection For the supply input (VCC) of the ADP3416, a local bypass capacitor is recommended to reduce the noise and to supply some of the peak currents drawn. Use a 1 µF, low ESR capacitor. Multilayer ceramic chip (MLCC) capacitors provide the best combination of low ESR and small size and can be obtained from the following vendors: When the driver is enabled, the driver’s output is 180 degrees out of phase with the PWM input. When the ADP3416 is disabled, the low side gate is held low. High Side Driver The high side driver is designed to drive a floating low RDS(ON) N-channel MOSFET. The maximum output resistance for the driver is 4 Ω for sourcing and 2.5 Ω for sinking gate current. The low output resistance allows the driver to have 40 ns rise and 30 ns fall times into a 3 nF load. The bias voltage for the high side driver is developed by an external bootstrap supply circuit, which is connected between the BST and SW Pins. Murata GRM235Y5V106Z16 www.murata.com TaiyoYuden EMK325F106ZF www.t-yuden.com Tokin C23Y5V1C106ZP www.tokin.com Keep the ceramic capacitor as close as possible to the ADP3416. The bootstrap circuit comprises a diode, D1, and bootstrap capacitor, CBST. When the ADP3416 is starting up, the SW Pin is at ground, so the bootstrap capacitor will charge up to VCC through D1. When the PWM input goes high, the high side driver will begin to turn the high side MOSFET, Q1, ON by pulling charge out of CBST. As Q1 turns ON, the SW Pin will rise up to VIN, forcing the BST Pin to VIN + VC(BST), which is enough gate to source voltage to hold Q1 ON. To complete the cycle, Q1 is switched OFF by pulling the gate down to the voltage at the SW Pin. When the low side MOSFET, Q2, turns ON, the SW Pin is pulled to ground. This allows the bootstrap capacitor to charge up to VCC again. Bootstrap Circuit The bootstrap circuit uses a charge storage capacitor (CBST) and a Schottky diode, as shown in Figure 1. Selection of these components can be done after the high side MOSFET has been chosen. The bootstrap capacitor must have a voltage rating that is able to handle the maximum battery voltage plus 5 volts. A minimum 50 V rating is recommended. The capacitance is determined using the following equation: CBST = The high side driver’s output is in phase with the PWM input. When the driver is disabled, the high side gate is held low. QGATE ∆VBST where, QGATE is the total gate charge of the high side MOSFET, and ∆VBST is the voltage droop allowed on the high side MOSFET drive. For example, the IRF7811 has a total gate charge of about 20 nC. For an allowed droop of 200 mV, the required bootstrap capacitance is 100 nF. A good quality ceramic capacitor should be used. Overlap Protection Circuit The overlap protection circuit (OPC) prevents both of the main power switches, Q1 and Q2, from being ON at the same time. This is done to prevent shoot-through currents from flowing through both power switches and the associated losses that can occur during their ON-OFF transitions. The overlap protection circuit accomplishes this by adaptively controlling the delay from Q1’s turn OFF to Q2’s turn ON, and by internally setting the delay from Q2’s turn OFF to Q1’s turn ON. A Schottky diode is recommended for the bootstrap diode due to its low forward drop, which maximizes the drive available for the high side MOSFET. The bootstrap diode must have a minimum 40 V rating to withstand the maximum battery voltage plus 5 V. The average forward current can be estimated by: To prevent the overlap of the gate drives during Q1’s turn OFF and Q2’s turn ON, the overlap circuit monitors the voltage at the SW Pin. When the PWM input signal goes low, Q1 will begin to turn OFF (after a propagation delay), but before Q2 can turn ON, the overlap protection circuit waits for the voltage at the SW Pin to fall from VIN to 1 V. Once the voltage on the SW Pin has fallen to 1 V, Q2 will begin turn ON. By waiting for the voltage on the IF(AVG) ≈ QGATE × f MAX where fMAX is the maximum switching frequency of the controller. The peak surge current rating should be checked in-circuit, since this is dependent on the source impedance of the 5 V supply, and the ESR of CBST. –6– REV. A ADP3416 Printed Circuit Board Layout Considerations Typical Application Circuits Use the following general guidelines when designing printed circuit boards: The circuit in Figure 3 shows how two drivers can be combined with the ADP3165 to form a total power conversion solution for VCC(CORE) generation in a high current Intel CPU computer. 1. Trace out the high current paths and use short, wide traces to make these connections. 2. Connect the PGND Pin of the ADP3416 as close as possible to the source of the lower MOSFET. 3. The VCC bypass capacitor should be located as close as possible to VCC and PGND Pins. L1 1H 270F/16V 3 OS-CON SP SERIES 18m ESR(EACH) VIN12V VINRTN + + + C1 C2 C3 R7 5m R6 2k R4 10 10F 2 MLCC D1 MBR052LTI Q2 FZ649TA C4 4.7F 2 IN Z1 ZMM5263BCT RA 32.4k Q1 2N7000 3 VID2 PWM1 18 1 BST 4 VID1 PWM2 17 2 IN 5 VID0 PWM3 16 7 COMP RB 10.0k COC 1.2nF Q7 FDB8030L VCC 20 6 SHARE R2 DRVL 5 REF 19 PC 15 OUTEN U5 10k 1/6 7404 4 VCC 2 VID3 8 GND D2 MBR052LTI 2200F/6.3V 9 L2 RUBYCON MBZ SERIES 600nH 12mESR(EACH) C13 15nF R8 2 DRVH 8 Q4 FDB7030L L3 600nH SW 7 3 NC PGND 6 4 VCC DRVL 5 C16 15nF R9 2 Q8 FDB8030L PGND 14 CS– 13 9 FB CS+ 12 10 CT PWRGD 11 C17 D3 MBR052LTI U4 100nF ADP3416 1 BST 2 IN R3 1k C18 4.7F DRVH 8 Q5 FDB7030L SW 7 3 NC PGND 6 4 VCC DRVL 5 NC = NO CONNECT Q9 FDB8030L Figure 3. 65 A Intel Pentium 4 CPU, VR Down Guideline Design REV. A –7– + + C20 C29 10F 27 MLCC C14 U3 100nF ADP3416 C15 4.7F C9 150pF C10 100pF Q3 FDB7030L SW 7 PGND 6 1 VID4 C7 1nF DRVH 8 3 NC C12 4.7F U1 ADP3165 FROM CPU 1 BST R5 20 C6 15nF C11 U2 100nF ADP3416 L4 600nH C19 15nF R10 2 VCC(CORE) 1.1V – 1.85V 65A VCC(CORE)RTN ADP3416 OUTLINE DIMENSIONS 8-Lead Standard Small Outline Package [SOIC] Narrow Body (R-8) C02600–0–8/02(A) Dimensions shown in millimeters and (inches) 5.00 (0.1968) 4.80 (0.1890) 4.00 (0.1574) 3.80 (0.1497) 8 5 1 4 6.20 (0.2440) 5.80 (0.2284) PIN 1 1.27 (0.0500) BSC 0.25 (0.0098) 0.10 (0.0040) SEATING PLANE 1.75 (0.0688) 1.35 (0.0532) 0.50 (0.0196) 45 0.25 (0.0099) 8 0.25 (0.0098) 0 1.27 (0.0500) 0.41 (0.0160) 0.19 (0.0075) 0.51 (0.0201) 0.33 (0.0130) CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN COMPLIANT TO JEDEC STANDARDS MS-012AA Revision History Location Page 08/02—Data Sheet changed from REV. 0 to REV. A. PRINTED IN U.S.A. Updated OUTLINE DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 –8– REV. A