AD AD8024

a
FEATURES
Quad High-Speed Current Feedback Amplifier
with Disable
–3 dB Bandwidth 350 MHz @ G = 1
Slew Rate 2400 V/s, VS = 12 V
Drives High Capacitive Loads
Settling Time to 0.1% in 35 ns; 300 pF Load, 6 V Step
Settling Time to 0.1% in 18 ns; 5 pF Load, 2 V Step
Low Power
Operates on +5 V to 12 V (+24 V)
4 mA/Amplifier Supply Current
Excellent Video Specs (RL = 150 , G = 2)
Gain Flatness 0.1 dB to 70 MHz
0.04% Differential Gain
0.09 Differential Phase
Crosstalk –58 dB @ 5 MHz
THD –72 dBc @ 5 MHz
Outstanding DC Accuracy
VOFFSET is 2 mV (Typ)
IBIAS is 3 A (Max)
16-Lead SOIC Package
APPLICATIONS
LCD Column Drivers
High-Performance Test Equipment
Video Line Driver
ATE
Quad 350 MHz
24 V Amplifier
AD8024
FUNCTIONAL BLOCK DIAGRAM
1
16
2
15
3
14
VCC 4
AD8024AR
DIS 5
13
VEE
12
DGND
6
11
7
10
8
9
1V
20ns
VIN
PRODUCT DESCRIPTION
The AD8024 is a low settling time, high-speed, high output
voltage quad current feedback operational amplifier. Manufactured on ADI’s proprietary XFHV high-speed bipolar process,
the AD8024 is capable of driving to within 1.3 V of its 24 V
supply rail. Each amplifier has high-output current capability
and can drive high capacitive loads.
The AD8024 outputs settle to 0.1% within 35 ns into a 300 pF
load (6 V swing). The AD8024 can run on both +5 V as well as
± 12 V rails. Slew rate on ± 12 V supplies is 2400 V/µs. DC
Characteristics are outstanding with typical 2 mV offset, and
3 µA maximum input bias current. High-speed disable pin
allows the AD8024 to be shut down when not in use. Low-power
operation is assured with the 4 mA/Amplifier supply current draw.
VOUT
2V
Figure 1. Pulse Response Driving a Large Load Capacitance, C L = 300 pF, G = 3, RFB = 2.32 kΩ, RS = 10.5 Ω,
RL = 1 kΩ, VS = ± 7.5 V
The high voltage drive capability, low settling time, high slew
rate, low offset, and high bandwidth make the AD8024 ideally
suited as an LCD column driver, a video line driver, and for
use in high-performance test equipment.
The AD8024 is available in a 16-lead SOIC package.
REV. B
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
World Wide Web Site: http://www.analog.com
Fax: 781/326-8703
© Analog Devices, Inc., 2000
AD8024–SPECIFICATIONS (@ T = 25C, V = 7.5 V, C
A
Model
DYNAMIC PERFORMANCE
Bandwidth (3 dB)
Bandwidth (0.1 dB)
Slew Rate
Settling Time to 0.1%
NOISE/HARMONIC PERFORMANCE
Total Harmonic Distortion
Input Voltage Noise
Input Current Noise
Differential Gain (RL = 150 Ω)
Differential Phase (RL = 150 Ω)
DC PERFORMANCE
Input Offset Voltage
Offset Drift
+Input Bias Current
–Input Bias Current
Open-Loop Transresistance
S
Conditions
LOAD
= 10 pF, RL = 150 , unless otherwise noted)
Min
Typ
RFB = 800 Ω, No Peaking, G = 3
160
No Peaking, G = 3
370
6 V Step, G = 3, CLOAD = 300 pF
TA = 25°C to 85°C, ± 3 V (6 V Step)
CLOAD = 300 pF, RS = 10.5 Ω, RLOAD > 1 kΩ,
RFB = 2.32 kΩ
± 1 V (2 V Step), CLOAD = 5 pF,
RS = 0 Ω, RLOAD > 1 kΩ, RFB = 750 kΩ
200
25
390
30
MHz
MHz
V/µs
ns
18
ns
fC = 5 MHz, RL = 1 kΩ
fC = 5 MHz, RL = 150 Ω
f = 10 kHz
f = 10 kHz (–IIN)
f = 3.58 MHz, G = 2
f = 3.58 MHz, G = 2
–72
–67
3
8
0.04
0.09
dBc
dBc
nV/√Hz
pA/√Hz
%
Degrees
TMIN to TMAX
2
1.5
1
1
1.2
0.840
0.850
TMIN to TMAX
INPUT CHARACTERISTICS
Input Resistance
+Input
–Input
Input Capacitance
Input Common-Mode Voltage
Common-Mode Rejection Ratio
Input Offset Voltage
–Input Current
+Input Current
OUTPUT CHARACTERISTICS
Output Voltage Swing
RL = 1 kΩ
RL = 150 Ω
Linear Output Current
Max Dynamic Output Current
Capacitive Load Drive
MATCHING CHARACTERISTICS
Dynamic
Crosstalk (Worst Between Any 2)
DC
Input Offset Voltage Match
Input Current Match
POWER SUPPLY
Operating Range
TMIN to TMAX
TMIN to TMAX
5
7.5
3
1
135
2
–VS + 1.2
62
VOL – VEE
VCC – VOH
VOL – VEE
VCC – VOH
Error <3%, R1 = 50 Ω
35
G = 2, f = 5 MHz
+VS – 2
66
0.2
1
0.8
1.1
1.0
1.3
50
300
1000
0.4
0.1
Single Supply
Dual Supply
5
± 2.5
16
19.5
0.5
TMIN to TMAX
Disable = HIGH
VS = ± 6.5 V to ± 8.5 V
–2–
64
70
0.03
0.07
Unit
mV
µV/°C
µA
µA
MΩ
MΩ
MΩ
Ω
pF
V
dB
µA/V
µA/V
1.0
1.3
1.35
1.55
–58
Total Quiescent Current
Power Supply Rejection Ratio
Input Offset Voltage
–Input Current
+Input Current
Max
V
V
V
V
mA
mA
pF
dB
1.5
2.0
mV
µA
24
± 12
17
V
V
mA
mA
mA
1
dB
µA/V
µA/V
REV. B
AD8024
Model
Conditions
DISABLE CHARACTERISTICS
Off Isolation
Off Output Impedance
Turn-On Time
Turn-Off Time
Switching Threshold
Min
Typ
1.3
49
20
25
20
1.6
f = 6 MHz
VTH – DGND
OPERATING TEMPERATURE RANGE
–40
Max
Unit
1.9
dB
pF
ns
ns
V
+85
°C
Specifications subject to change without notice.
ABSOLUTE MAXIMUM RATINGS*
Output Short Circuit Limit
Supply Voltage VCC – VEE . . . . . . . . . . . . . . . . . . . 26 V Total
Internal Power Dissipation
Small Outline (R) . . . . . 1.0 Watts (Observe Derating Curve)
Input Voltage (Common Mode) . . . . . . . . . . . . . . . . . . . ± VS
Differential Input Voltage . . . . . . . . . . . . . . . ± 3 V (Clamped)
Output Voltage Limit
Maximum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +VS
Minimum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –VS
Output Short Circuit Duration
. . . . . . . . . . . . . . . . . . . . . . Observe Power Derating Curve
Storage Temperature Range
R Package . . . . . . . . . . . . . . . . . . . . . . . . –65°C to +125°C
Operating Temperature Range
AD8024A . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Lead Temperature Range (Soldering 10 sec) . . . . . . . . . 300°C
The AD8024’s internal short circuit limitation is not sufficient
to protect the device in the event of a direct short circuit between a video output and a power supply voltage rail (VCC or
VEE). Temporary short circuits can reduce an output’s ability to
source or sink current and therefore impact the device’s ability
to drive a load. Short circuits of extended duration can cause
metal lines to fuse open, rendering the device nonfunctional.
*Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
It must also be noted that in (noninverting) gain configurations
(with low values of gain resistor), a high level of input overdrive
can result in a large input error current, which may then result
in a significant power dissipation in the input stage. This power
must be included when computing the junction temperature rise
due to total internal power.
ORDERING GUIDE
AD8024AR-16
Temperature
Range
Package
Description
–40°C to +85°C 16-Lead Narrow-Body
SOIC
Package
Option
2.5
MAXIMUM POWER DISSIPATION – Watts
Model
To prevent these problems, it is recommended that a series
resistor be placed as close as possible to the outputs. This will
serve to substantially reduce the magnitude of the fault currents
and protect the outputs from damage caused by intermittent
short circuits. This may not be enough to guarantee that the
maximum junction temperature (150°C) is not exceeded under
all conditions. To ensure proper operation, it is necessary to
observe the maximum power derating curve in Figure 2.
R-16A
Maximum Power Dissipation
The maximum power that can be safely dissipated by the AD8024
is limited by the associated rise in junction temperature. The
maximum safe junction temperature for the plastic encapsulated
parts is determined by the glass transition temperature of the
plastic, about 150°C. Temporarily exceeding this limit may
cause a shift in parametric performance due to a change in the
stresses exerted on the die by the package. Exceeding a junction
temperature of 175°C for an extended period can result in
device failure.
TJ = 150C
2.0
1.5
16-LEAD SOIC
1.0
0.5
–50 –40 –30 –20 –10 0 10 20 30 40 50 60 70
AMBIENT TEMPERATURE – C
80 90
Figure 2. Maximum Power Dissipation vs. Ambient
Temperature
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the AD8024 features proprietary ESD protection circuitry, permanent damage may occur on
devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
REV. B
–3–
WARNING!
ESD SENSITIVE DEVICE
AD8024–Typical Performance Characteristics
25
12
TA = 25C
10
TOTAL SUPPLY CURRENT – mA
COMMON-MODE VOLTAGE – Volts
TA = 25C
8
–VCM
6
+VCM
4
10
5
0
4
2
6
8
SUPPLY VOLTAGE – Volts
10
12
0
2
4
6
8
10
SUPPLY VOLTAGE – Volts
12
14
Figure 6. Total Supply Current vs. Supply Voltage
Figure 3. Input Common-Mode Voltage Range vs.
Supply Voltage
24
7.0
VS = 7.5V
–SWING
6.5
22
TOTAL SUPPLY CURRENT – mA
OUTPUT VOLTAGE SWING – V
15
2
0
+SWING
6.0
5.5
5.0
4.5
4.0
20
VS = 12V
18
16
VS = 7.5V
14
12
3.5
3.0
10
100
1k
LOAD RESISTANCE – 10
–60
10k
–40
–20
0
20
40
TEMPERATURE – C
60
80
100
Figure 7. Total Supply Current vs. Temperature
Figure 4. Output Voltage Swing vs. Load Resistance
25
3
TA = 25C
VS = 7.5V
SWING
(NO LOAD)
20
INPUT BIAS CURRENT – A
OUTPUT VOLTAGE SWING – V p-p
20
SWING
(RL = 150)
15
10
2
–IB
1
+IB
0
5
0
2
3
4
5
7
9
6
8
10
SUPPLY VOLTAGE – Volts
11
12
–1
–60
13
Figure 5. Output Voltage Swing vs. Supply Voltage
–40
–20
0
20
40
TEMPERATURE – C
60
80
100
Figure 8. Input Bias Current vs. Temperature
–4–
REV. B
AD8024
10M
2.5
1M
INPUT OFFSET VOLTAGE – mV
VS = 7.5V
TRANSIMPEDANCE – 2.0
1.5
VS = 12V
VS = 7.5V
100k
10k
1k
100
1.0
10
0.5
–60
–40
–20
0
20
40
TEMPERATURE – C
60
80
1
0.01
100
100
VNOISE
COMMON-MODE REJECTION – dB
–INOISE
CURRENT NOISE – pA/ Hz
VOLTAGE NOISE – nV/ Hz
10
1000
VS = 12V
80
10
100
90
VS = 7.5V
+INOISE
1
10
FREQUENCY – MHz
Figure 12. Open-Loop Transimpedance vs. Frequency,
RL = 150 Ω
Figure 9. Input Offset Voltage vs. Temperature
100
0.1
70
VS = 7.5V
60
50
R
40
R
30
VCM
R
20
R
10
1
0.01
0.1
1
FREQUENCY – kHz
0
1
100
10
60
10000
VS = 7.5V
POWER SUPPLY REJECTION – dB
G = +1
VS = 7.5V
OUTPUT IMPEDANCE – 100
Figure 13. Common-Mode Rejection vs. Frequency
Figure 10. Input Current and Voltage Noise vs. Frequency
1000
100
10
50
40
30
+PSRR
20
–PSRR
10
0
0
1
10
FREQUENCY – MHz
100
1
200
10
100
FREQUENCY – MHz
1000
Figure 14. Power Supply Rejection vs. Frequency
Figure 11. Output Impedance vs. Frequency, Disabled State
REV. B
10
FREQUENCY – MHz
1
–5–
AD8024
3000
–30
G=2
VS = 7.5V
VO = 2V p-p
–50
RL = 150
2500
G = +2
SLEW RATE – V/s
2ND
–60
3RD
–70
2000
G = +10
1500
500
–90
0
10
FREQUENCY – MHz
2
100
Figure 15. Harmonic Distortion vs. Frequency, RL = 150 Ω
6
8
10
SUPPLY VOLTAGE – V
3
CLOSED-LOOP GAIN (NORMALIZED) – dB
10
20
30
40
VS = 2.5V
50
VS = 7.5V
60
70
180
2
1
GAIN
90
0
–1
PHASE
VS = 12V
–2
10
FREQUENCY – MHz
–4
–90
–5
VS = 7.5V
–6
–180
–7
–8
1
100
Figure 16. Crosstalk vs. Frequency, G = 2, RL = 150 Ω
10
100
FREQUENCY – MHz
CLOSED-LOOP GAIN (NORMALIZED) – dB
VS = 7.5V
RL = 150
1000
800
G = +10
600
G = +2
G = –1
400
G = +1
200
180
1
GAIN
0
90
–1
–2
PHASE
–3
VS = 2.5V
0
–4
–5
–6
–90
–7
VS = 7.5V
–8
–9
–180
–10
–11
–12
0
1
2
3
4
OUTPUT VOLTAGE STEP – V p-p
5
–270
1000
Figure 19. Closed-Loop Gain and Phase vs. Frequency,
G = 1, RL = 150 Ω
2
1200
0
–3
–9
80
1
12
Figure 18. Maximum Slew Rate vs. Supply Voltage
0
CROSSTALK – dB
4
PHASE SHIFT – Degrees
1
SLEW RATE – V/s
G = –1
1000
–80
0
G = +1
6
1
Figure 17. Slew Rate vs. Output Step Size
PHASE SHIFT – Degrees
HARMONIC DISTORTION – dBc
–40
10
100
FREQUENCY – MHz
–270
1000
Figure 20. Closed-Loop Gain and Phase vs. Frequency,
G = 2, RL = 150 Ω
–6–
REV. B
AD8024
180
0
GAIN
–1
2V
–2
VS = 12V
–3
90
PHASE
–4
–5
0
–6
VS = 7.5V
–7
–90
–8
–9
–10
PHASE SHIFT – Degrees
CLOSED LOOP GAIN (NORMALIZED) – dB
1
VIN
VOUT
–180
–11
2V
–12
–270
1000
–13
1
10
100
FREQUENCY – MHz
Figure 21. Closed-Loop Gain and Phase vs. Frequency,
G = 10, RL = 150 Ω
Figure 24. Large Signal Pulse Response, Gain = 1
(RFB = 5 kΩ, RL = 150 Ω, VS = ± 7.5 V)
180
1
GAIN
0
250mV
–1
–2
VS = 12V
PHASE
–3
0
–4
–90
–5
VS = 7.5V
–6
VIN
VOUT
–180
–7
500mV
–8
–9
1
–270
1000
10
100
FREQUENCY – MHz
Figure 22. Closed-Loop Gain and Phase vs. Frequency,
G = –1, RL = 150 Ω
500mV
Figure 25. Small Signal Pulse Response, Gain = 2
(RFB = 750 Ω, RL = 150 Ω, VS = ± 7.5 V)
20ns
1V
VIN
VIN
VOUT
VOUT
500mV
2V
Figure 23. Small Signal Pulse Response, Gain = 1
(RFB = 5 kΩ, RL = 150 Ω, VS = ± 7.5 V)
REV. B
20ns
90
PHASE SHIFT – Degrees
CLOSED-LOOP GAIN (NORMALIZED) – dB
20ns
20ns
Figure 26. Large Signal Pulse Response, Gain = 2
(RFB = 750 Ω, RL = 150 Ω, VS = ± 7.5 V)
–7–
AD8024
50mV
20ns
500mV
VIN
VIN
VOUT
VOUT
500mV
500mV
Figure 29. Small Signal Pulse Response, Gain = –1
(RFB = 909 Ω, RL = 150 Ω, VS = ± 7.5 V)
Figure 27. Small Signal Pulse Response, Gain = 10
(RFB = 400 Ω, RL = 150 Ω, VS = ± 7.5 V)
200mV
20ns
2V
20ns
VIN
20ns
VIN
VOUT
VOUT
2V
2V
Figure 30. Large Signal Pulse Response, Gain = –1
(RFB = 909 Ω, RL = 150 Ω, VS = ± 7.5 V)
Figure 28. Large Signal Pulse Response, Gain = 10
(RFB = 400 Ω, RL = 150 Ω, VS = ± 7.5 V)
–8–
REV. B
AD8024
General
Driving Capacitive Loads
The AD8024 is a wide bandwidth, quad video amplifier. It offers a
high level of performance on 16 mA total quiescent supply current for closed-loop gains of ± 1 or greater.
When used in combination with the appropriate feedback resistor,
the AD8024 will drive any load capacitance without oscillation.
In accordance with the general rule for current feedback amplifiers, increased load capacitance requires the use of a higher
feedback resistor for stable operation.
Bandwidth up to 380 MHz, low differential gain and phase errors,
and high output current make the AD8024 an efficient video
amplifier.
The AD8024’s wide phase margin and high output current make it
an excellent choice when driving any capacitive load.
Choice of Feedback Resistor
Because it is a current feedback amplifier, the closed-loop
bandwidth of the AD8024 may be customized with the feedback resistor.
Due to the high open-loop transresistance and low inverting
input current of the AD8024, large feedback resistors do not
create large closed-loop gain errors. In addition, the high output
current allows rapid voltage slewing on large load capacitors.
For wide bandwidth and clean pulse response, an additional
small series output resistor of about 10 Ω is recommended.
RF
A larger feedback resistor reduces peaking and increases the
phase margin at the expense of reduced bandwidth. A smaller
feedback resistor increases bandwidth at the expense of increased
peaking and reduced phase margin.
+VS
0.1F
RG
–
AD8024
The closed-loop bandwidth is affected by attenuation due to the
finite output resistance. The open-loop output resistance of ≈6 Ω
reduces the bandwidth somewhat when driving load resistors less
than ≈150 Ω. The bandwidth will be ≈10% greater for load resistance above a few hundred ohms.
1.0F
VIN
+
RS
VO
1.0F
CL
0.1F
RT
–VS
Figure 31. Circuit for Driving a Capacitive Load
The value of the feedback resistor is not critical unless maintaining
the widest or flattest frequency response is desired. Table I shows
the bandwidth at different supply voltages for some useful closedloop gains when driving a 150 Ω load. The recommended resistors
are for the widest bandwidth with less than 2 dB peaking.
1V
20nS
VIN
Table I. –3 dB Bandwidth vs. Closed-Loop Gain Resistor,
RL = 150 VS – Volts
± 7.5
± 12
± 2.5
REV. B
Gain
+1
+2
+10
–1
+1
+10
–1
+2
RF – 5000
750
400
750
8000
215
750
1125
VOUT
BW – MHz
350
275
105
165
380
150
95
125
2V
Figure 32. Pulse Response Driving a Large Load
Capacitance, CL = 300 pF, G = 3, RFB = 2.32 kΩ,
RS = 10.5 Ω, RL = 1 kΩ, VS = ± 7.5 V
–9–
AD8024
Overload Recovery
Disable Mode Operation
The most important overload conditions are:
When the Disable pin is tied to DGND, all amplifiers are operational, in the enabled state.
Input Common-Mode Voltage Overdrive
Output Voltage Overdrive
Input Current Overdrive.
When the voltage on the Disable pin is raised to 1.6 V or more
above DGND, all amplifiers are in the disabled, powered-down
state. In this condition, the DISABLE pin sources approximately
0.1 µA, the total quiescent current is reduced to approximately
500 µA, all outputs are in a high impedance state, and there is a
high level of isolation from inputs to outputs.
When configured for a low closed-loop gain, the AD8024
recovers quickly from an input common-mode voltage overdrive; typically in <25 ns.
When configured for a higher gain and overloaded at the output,
recovery from an output voltage overdrive is also short; approximately 55 ns (see Figure 33). For higher overdrive, the response
is somewhat slower. For 100% overdrive, the recovery time is
substantially longer.
When configured for a high noninverting gain, a high input overdrive can result in a large current into the input stage. Although
this current is internally limited to approximately 30 mA, its
effect on the total power dissipation may be significant. See also
the warning under Maximum Power Dissipation.
The output impedance in the disabled mode is the equivalent of all
external resistors, seen from the output pin, in parallel with the
total disabled output impedance of the amplifier, typically 20 pF.
The input stages of the AD8024 include protection from large
differential input voltages that may be present in the disabled
mode. Internal clamps limit this voltage to 1.5 V. The high inputto-output isolation is maintained for voltages below this limit.
50ns
1V
VIN
VOUT
5V
Figure 33. 15% Overload Recovery, Gain = 10
(RFB = 400 Ω, RL = 1 kΩ, VS = ± 7.5 V)
–10–
REV. B
AD8024
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
0.3937 (10.00)
0.3859 (9.80)
0.1574 (4.00)
0.1497 (3.80)
PIN 1
16
9
1
8
0.050 (1.27)
BSC
0.0688 (1.75)
0.0532 (1.35)
0.0196 (0.50)
45
0.0099 (0.25)
8
0.0192 (0.49) SEATING
0 0.0500 (1.27)
0.0099 (0.25)
PLANE
0.0138 (0.35)
0.0160 (0.41)
0.0075 (0.19)
PRINTED IN U.S.A.
0.0098 (0.25)
0.0040 (0.10)
0.2440 (6.20)
0.2284 (5.80)
C01054–0–6/00 (rev. B)
16-Lead Plastic SOIC
(R-16A)
REV. B
–11–
WWW.ALLDATASHEET.COM
Copyright © Each Manufacturing Company.
All Datasheets cannot be modified without permission.
This datasheet has been download from :
www.AllDataSheet.com
100% Free DataSheet Search Site.
Free Download.
No Register.
Fast Search System.
www.AllDataSheet.com