Order this document by MRF5583/D SEMICONDUCTOR TECHNICAL DATA The RF Line . . . designed for amplifier, oscillator or frequency multiplier applications in industrial equipment. Suitable for use as a Class A, B or C output driver or pre–driver stages in VHF and UHF. • Low Cost SORF Plastic Surface Mount Package • Guaranteed RF Specification — |S21|2 • S–Parameter Characterization • Tape and Reel Packaging Options Available by adding suffix: R1 suffix = 500 units per reel R2 suffix = 2,500 units per reel IC = – 500 mA SURFACE MOUNT HIGH–FREQUENCY TRANSISTOR PNP SILICON MAXIMUM RATINGS Symbol Value Unit Collector–Emitter Voltage Rating VCEO – 30 V Collector–Base Voltage VCBO – 30 V Emitter–Base Voltage VEBO – 3.0 V Collector Current — Continuous IC – 500 mA Operating and Storage Junction Temperature Range TJ, Tstg – 55 to +150 °C CASE 751–05, STYLE 1 (SO–8) DEVICE MARKING MRF5583 = 5583 THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Total Device Dissipation @ TA = 25°C Derate above 25°C PD 1.0 8.0 Watt mW/°C Storage Temperature Tstg 150 °C Thermal Resistance, Junction to Ambient RθJA 125 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted.) Symbol Min Typ Max Unit Collector–Emitter Breakdown Voltage (IC = –10 mA) V(BR)CEO – 30 — — V Collector–Base Breakdown Voltage (IC = –10 µA) V(BR)CBO – 30 — — V Emitter–Base Breakdown Voltage (IE = –100 µA) V(BR)EBO –3 — — V Collector Cutoff Current (VCB = – 20 V) ICBO — — – 1.0 µA Emitter Cutoff Current (VEB = – 2.0 V) IEBO — — – 0.5 µA hFE 20 25 15 — — — — 100 — — Collector–Emitter Saturation Voltage (IC = –100 mA, IB = –10 mA) VCE(sat) — — 0.8 V Base–Emitter On Voltage (IC = –100 mA, VCE = – 2.0 V) VBE(on) — — 1.8 V fT — 2100 — MHz |S21|2 12.5 15.5 — dB Characteristic OFF CHARACTERISTICS ON CHARACTERISTICS DC Current Gain (IC = – 40 mA, VCE = – 2.0 V) DC Current Gain (IC = –100 mA, VCE = – 2.0 V) DC Current Gain (IC = – 300 mA, VCE = – 5.0 V) SMALL–SIGNAL CHARACTERISTICS Current–Gain — Bandwidth Product (IC = – 35 mA, VCE = –15 V, f = 100 MHz) Insertion Gain (VCE = –15 V, IC = – 35 mA, f = 250 MHz) REV 6 RF DEVICE DATA MOTOROLA Motorola, Inc. 1994 MRF5583 1 S11 VCE (Volts) IC (mA) f (MHz) |S11| –15 – 35 10 30 50 70 100 300 500 700 1000 0.47 0.59 0.63 0.64 0.65 0.67 0.67 0.67 0.66 S21 ± φ – 57 – 116 – 140 – 151 – 161 179 168 160 146 S12 |S21| ± φ |S12| 64.7 42.2 28.8 21.4 15.4 5.23 3.11 2.24 1.54 155 126 113 105 97 79 66 57 44 0.01 0.02 0.02 0.02 0.02 0.05 0.07 0.09 0.13 ± S22 φ |S22| 60 44 39 42 45 58 60 60 60 0.83 0.56 0.39 0.30 0.24 0.13 0.20 0.24 0.30 ± φ – 26 – 58 – 74 – 82 – 80 – 109 – 114 – 116 – 123 Table 1. Common Emitter S–Parameters MRF5583 2 MOTOROLA RF DEVICE DATA PACKAGE DIMENSIONS NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. –A– 8 5 –B– 1 P 4X 0.25 (0.010) 4 M 8X K D 0.25 (0.010) M T B SEATING PLANE S M R C –T– B A M_ S X 45 _ F J STYLE 1: PIN 1. 2. 3. 4. 5. 6. 7. 8. EMITTER COLLECTOR COLLECTOR EMITTER EMITTER BASE BASE EMITTER DIM A B C D F G J K M P R MILLIMETERS MIN MAX 4.80 5.00 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.18 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 INCHES MIN MAX 0.189 0.196 0.150 0.157 0.054 0.068 0.014 0.019 0.016 0.049 0.050 BSC 0.007 0.009 0.004 0.009 0_ 7_ 0.229 0.244 0.010 0.019 CASE 751–05 ISSUE M MOTOROLA RF DEVICE DATA MRF5583 3 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. MRF5583 4 ◊ *MRF5583/D* MRF5583/D MOTOROLA RF DEVICE DATA