B40C1500G THRU B380C1500G GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER Reverse Voltage - 65 to 600 Volts Forward Current - 1.5 Amperes Case Style WOG FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated chip junctions ♦ High case dielectric strength ♦ Typical IR less than 0.1µA ♦ High surge current capability ♦ Ideal for printed circuit boards ♦ High temperature soldering guaranteed: 260°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension 0.388 (9.86) 0.348 (8.84) 0.220 (5.6) 0.160 (4.1) 1.0 (25.4) MIN. 0.032 (0.81) 0.060 (1.52) 0.028 (0.71) 0.020 (0.51) 0.220 (5.6) 0.348 (8.84) 0.180 (4.6) 0.308 (7.82) MECHANICAL DATA Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting Position: Any Weight: 0.04 ounce, 1.1 grams 0.220 (5.6) 0.180 (4.6) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS B40 C1500G B80 C1500G B125 C1500G B250 C1500G B380 C1500G UNITS Maximum repetitive peak reverse voltage VRRM 65 125 200 400 600 Volts Maximum RMS input voltage R + C-load VRMS 40 80 125 250 380 Volts Maximum DC blocking voltage VDC 65 125 200 400 600 Volts Maximum peak working voltage VRWM 90 180 300 600 800 Volts Maximum non-repetitive peak voltage VRSM 100 200 350 650 1000 Volts Maximum repetitive peak forward surge current IFRM 10.0 Amps Maximum average forward output current for free air operation at TA=45°C R + L-load C-load I(AV) 1.6 1.5 Amps IFSM 50.0 Amps 2 12.5 A2sec Peak forward surge current single sine wave on rated load at TJ=125°C Rating for fusing at TJ=125°C (t<100ms) It Min. series resistor C-load at VRMS = ±10% Rt 1.0 2.0 4.0 8.0 12.0 Ohms Maximum load capacitance +50% -10% CL 5000 2500 1000 500 200 µF Maximum instantaneous forward voltage drop per leg at 1.5A VF 1.0 Volts IR 10.0 µA RΘJA RΘJL 36.0 11.0 °C/W TJ -40 to +125 °C TSTG -40 to +150 °C Maximum reverse current at rated repetitive peak voltage per leg TA=25°C Typical thermal resistance per leg (NOTE 1) Operating junction temperature range Storage temperature range NOTES: 1. Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. at 0.375" (9.5mm) lead lengths with 0.2 x 0.2" 4/98 RATINGS AND CHARACTERISTICS CURVES B40C1500G THRU B380C1500G FIG.2 - DERATING CURVES OUTPUT RECTIFIED CURRENT FOR B250C1500G...B380C1500G FIG.1 - DERATING CURVES OUTPUT RECTIFIED CURRENT FOR B40C1500G...B125C1500G 1.6 50 to 60 Hz RESISTIVE OR INDUCTIVE LOAD 1.4 1.2 0.375” (9.5mm) CAPACITIVE LOAD < 500µF 500-5000µF 1.0 P.C.B. COPPER PADS 0.22 x 0.22” (5.5 x 5.5mm) 0.8 0.6 0.4 50 to 60Hz RESISTIVE OR INDUCTIVE LOAD 1.4 BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT AVERAGE AMPERES BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT AVERAGE AMPERES 1.6 0.375” (9.5mm) 1.2 CAPACITIVE LOAD 0-10µF 10-100µF >100µF 0.6 0.4 0.2 0.2 0 20 40 60 80 100 120 0 20 140 40 AMBIENT TEMPERATURE, °C 10 30 20 10 0 1 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60 Hz FIG. 5 - TYPICAL REVERSE CHARACTERISTICS PER LEG 120 140 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 1 0.1 0.01 0.4 10 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS TJ=100°C FIG. 6 - TYPICAL JUNCTION CAPACITANCE PER LEG 100 JUNCTION CAPACITANCE, pF 1 0.1 TJ=25°C 0.01 100 20 TA = 25°C SINGLE SINE-WAVE (JEDEC Method) 40 80 FIG. 4 - TYPICAL FORWARD CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD CURRENT, AMPERES PEAK FORWARD SURGE CURRENT, AMPERES 50 60 AMBIENT TEMPERATURE, °C FIG.3 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG INSTANTANEOUS REVERSE CURRENT, MICROAMPERES COPPER PADS 0.22 x 0.22” (5.5 x 5.5mm) 1.0 0.8 P.C.B. 0 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 100 TJ=25°C f = 1.0 MHz Vsig = 50mVp-p 10 1 0.1 1 10 REVERSE VOLTAGE, VOLTS 100