CVPD-970 Model ee Fr ad HS t e L Ro plian m Co 9X14 mm SMD, 3.3V, LVPECL Frequency Range: 622.08MHz to 670MHz Frequency Stability: Temperature Range: (Option X) ±25ppm 0°C to 70°C -40°C to 85°C Storage: -55°C to 120°C Input Voltage: Control Voltage: Input Current: 3.3V ± 0.3V 1.65V ± 1.65V 80mA Max Output: Symmetry: Rise/Fall Time: Pullability APR: Linearity: Load: Terminated to Vdd-2V Logic "1" Level: Logic "0" Level: Disable Time: Start-up Time: Differential LVPECL 49/51% Typ, 45/55% Max 0.4ns Max @ 20% to 80% Vcc ± 50ppm Min. ± 10% Max into 50 ohms Vcc-0.96V Min, Vcc-0.81V Max Vcc-1.85V Min, Vcc-1.65V Max 100ns Max 2ms Typ., 10ms Max Modulation BW: Sub-harmonics: >10KHz @ -3dB -40dBc Period Jitter: Phase Jitter: <5ps RMS (1-sigma) Max <1ps RMS (1-sigma) Max, <1ps RMS (1-sigma) Max, (20,000 periods) 12KHz~20MHz 50KHz~80MHz Phase Noise Typical: 100Hz 1KHz 10KHz 100KHz -80 dBc/Hz -108 dBc/Hz -132 dBc/Hz -140 dBc/Hz Aging: <3ppm 1st/yr, <2ppm every year thereafter Applications: 10 Gigabit Ethernet OC192: Forward Error Correction Broadband Networks SONET/SDH/DWD ATM Network/switch Telecom Designed using FR5 PCB & HFF crystal technology to provide a very Low Noise, Low Jitter Voltage Controlled Clock Oscillator solution at a competitive price. Specifications subject to change without notice. TD-030607 Rev.C Page 1 of 2 CVPD-970 Model 9X14 mm SMD, 3.3V, LVPECL ee Fr ad HS t e L Ro plian m Co Crystek Part Number Guide 0.560 (14.2) CVPD-970 X-622.080 CRYSTEK P/N Frequency Date Code #1 #2 #3 #4 0.360 (9.14) #1 Crystek 9x14 SMD PECL VCXO #2 Model 970 = High Frequency 3.3V #3 Temp. Range: Blank = 0/70°C, X=-40/85°C #4 Frequency in MHz: 3 or 6 decimal places 0.560 (14.2) 3 0.070 (1.77) 4 5 0.100 (2.54) 0.210 (5.3) Pad RECOMMENDED REFLOW SOLDERING PROFILE TEMPERATURE 2 0.040 (1.01) SUGGESTED PAD LAYOUT 0.050 (1.27) Standard Frequencies MHz 622.0800 666.5143 669.1281 625.0000 669.3265 644.5313 260°C 1 6 Example: CVPD-970X-622.080 = 3.3V, -40/85°C, 622.080 MHz Ramp-Up 3°C/Sec Max. Bottom View Critical Temperature Zone 1 2 3 4 5 6 Connection 0.090 (2.28) Volt Cont. E/D GND OUT COUT Vdd 0.280 (7.11) 0.200 (5.08) Ramp-Down 6°C/Sec. 217°C 200°C Enable/Disable Function 150°C Pin 2 Preheat 180 Secs. Max. 8 Minutes Max. 90 Secs. Max. 260°C for 10 Secs. Max. NOTE: Reflow Profile with 240°C peak also acceptable. Output Pin Open Active "0" level Vcc-1.620V Max Active "1" level Vcc-1.025V Min Disabled Disabled State: Pin 4 will assume a fixed level of logic "0" Pin 5 will assume a fixed level of logic "1" Mechanical: Shock: Solderability: Vibration: Solvent Resistance: Resistance to Soldering Heat: MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2007, Condition A MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition I or J Environmental: Thermal Shock: Moisture Resistance: MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 Packaging: Tape/Reel: 100ea, 250ea,500ea 24mm Tape Specifications subject to change without notice. TD-030607 Rev.C Page 2 of 2