Rev. B DTMPU50 Series Up to 50 Watts Single, Dual, and Triple Outputs AC/DC Medical Desktop Power Supply FEATURES ● Splash Proof ● 2 Year Warranty ● Class I Insulation ● IEC 320-C14 Input Inlet ● Optional Output Connectors ● Medical UL2601-1, EN60606-1 Approved ● Single, Dual, and Triple Outputs Available ● Output Voltage Protection (Crowbar Design) ● Wide Input Voltage 90 to 264VAC, 47 to 63Hz ● Output Voltages Available from 2VDC through 50VDC ● Input Surge Current, Over Voltage, and Over Load Protection SPECIFICATIONS: DTMPU50 Series All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max INPUT (Vin) Input Voltage Input Frequency Input Current (Low Line) Input Current (High Line) Inrush Current (Low Line) Inrush Current (High Line) Safety Ground Leakage Current Start-Up Time OUTPUT (Vo) Output Voltage Range Load Regulation Line Regulation Output Power Output Current Range *Ripple & Noise (peak to peak) Transient Response Hold-Up Time Temperature Coefficient PROTECTION Over Voltage Protection Over Current Protection GENERAL Efficiency Dielectric Withstanding Voltage For Primary to Secondary Dielectric Withstanding Voltage For Primary to Ground Isolation Resistance ENVIRONMENTAL Operating Temperature Storage Temperature Relative Humidity PHYSICAL Weight Dimensions Warranty SAFETY EMI Requirements for CISPR-11 EMI Requirements for FCC PART-18 90 47 Io = Full Load, Vin = 115VAC Io = Full Load, Vin = 230VAC Io = Full Load, 25°C, Cool Start, Vin = 115VAC Io = Full Load, 25°C, Cool Start, Vin = 230VAC Io = Full Load, Vin = 240VAC Io = Full Load, Vin = 100VAC Vin = 230VAC Io = Full Load Vin = 90 to 264VAC Full Load, Vin = 90VAC Io = Full Load to Half Load, Vin = 100VAC Io = Full Load, Vin = 110VAC All Outputs Io = Full Load, Vin = 230VAC 12 26 0.3 1.5 See Rating Chart 3 0.5 264 63 1.35 0.7 15 30 0.1 2 Unit VAC Hz A A A A mA s 16 -0.04 +0.04 VDC % % W A % ms ms %/°C 112 110 132 150 % % 0 See Rating Chart 0.5 75 83 7 1 50 1 4 88 % Primary to Secondary 5600 VDC Primary to Ground 2800 VDC Test Voltage = 2100VDC 50 MΩ Derate linearly from 100% Load at 50°C to 50% load at 70°C 0 -40 5 +70 +85 95 Approximately 510 - 560 5.75(L) x 2.99(W) x 1.69(H) 2 Vin = 220VAC Vin = 110VAC *Note: The Ripple & Noise for output voltages under 3.3VDC is 2% max. Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 B B °C °C % grams inches years Class Class DTMPU50 Series Up to 50 Watts Single, Dual, and Triple Outputs AC/DC Medical Desktop Power Supply Rev. B OUTPUT VOLTAGE / CURRENT RATING CHART SINGLE OUTPUT MODELS Model Number DTMPU50-100 DTMPU50-101 DTMPU50-102 DTMPU50-103 DTMPU50-104 DTMPU50-105 DTMPU50-106 DTMPU50-107 DTMPU50-108 DTMPU50-109 DTMPU50-110 DTMPU50-111 Preset Voltage 3 VDC 5 VDC 6 VDC 8 VDC 11 VDC 13 VDC 16 VDC 21 VDC 27 VDC 33 VDC 40 VDC 50 VDC Output Voltage Range 2 ~ 3 VDC 3 ~ 5 VDC 5 ~ 6 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 50 VDC Model Number Output 1 DTMPU50-200 Output 2 Output 1 DTMPU50-201 Output 2 Output 1 DTMPU50-202 Output 2 Output 1 DTMPU50-203 Output 2 Output 1 DTMPU50-204 Output 2 Output 1 DTMPU50-209 Output 3 Output 1 DTMPU50-210 Output 3 Output 1 DTMPU50-215 Output 3 Output 1 DTMPU50-216 Output 2 Output 1 DTMPU50-217 Output 3 Output 1 DTMPU50-218 Output 3 Output Voltage +3.3 VDC +12.0 VDC +5.0 VDC +12.0 VDC +5.0 VDC +15.0 VDC +5.0 VDC +24.0 VDC +3.3 VDC +5.0 VDC +12 VDC -12VDC +15 VDC -15 VDC +5.0 VDC -24.0 VDC +5.1 VDC +7.2 VDC +10.5 VDC -10.5 VDC +5.0 VDC -5.0 VDC Min. Output Current 0.5A 0.2A 0.5A 0.2A 0.5A 0.15A 0.5A 0.1A 0.5A 0.2A 0.3A 0A 0.2A 0.1A 0.5A 0.1A 0.5A 0.3A 0.2A 0A 0.5A 0A Model Number Output 1 DTMPU50-300 Output 2 Output 3 Output 1 DTMPU50-301 Output 2 Output 3 Output 1 DTMPU50-302 Output 2 Output 3 Output 1 DTMPU50-303 Output 2 Output 3 Output 1 DTMPU50-304 Output 2 Output 3 Output 1 DTMPU50-305 Output 2 Output 3 Output 1 DTMPU50-306 Output 2 Output 3 Output Voltage +3.3 VDC +12.0 VDC -12.0 VDC +5.0 VDC +12.0 VDC -5.0 VDC +5.0 VDC +12.0 VDC -12.0 VDC +5.0 VDC +15.0 VDC -15.0 VDC +5.0 VDC +24.0 VDC -24.0 VDC +5.0 VDC +24.0 VDC -12.0 VDC +3.3 VDC +12.0 VDC -5.0 VDC Min. Output Current 0.5A 0.4A 0.1A 0.5A 0.2A 0A 0.5A 0.2A 0.1A 0.5A 0.4A 0.1A 0.5A 0.2A 0A 0.5A 0.1A 0A 0.5A 0.4A 0.1A Max. Output Current 12.0 ~ 10.0A 10.0 ~ 8.00A 8.00 ~ 6.66A 7.00 ~ 5.25A 5.63 ~ 4.00A 4.00 ~ 3.46A 3.46 ~ 2.81A 3.12 ~ 2.38A 2.30 ~ 1.85A 1.85 ~ 1.51A 1.51 ~ 1.25A 1.25A ~ 1.00A Total Regulation 7% 5% 5% 5% 4% 3% 3% 3% 2% 2% 2% 2% Max. Output Power 30W 40W 40W 42W 45W 45W 45W 50W 50W 50W 50W 50W Max. Regulation 7% 5% 5% 5% 5% 5% 5% 5% 7% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Max. Output Power Max. Regulation 7% 5% 5% 5% 5% 5% 5% 5% 5% 5% 6% 5% 5% 5% 5% 5% 5% 5% 7% 5% 5% Max. Output Power DUAL OUTPUT MODELS Max. Output Current 5A 2A 5A 2A 5A 1.5A 5A 1A 5A 2A 3A 1A 2A 1A 5A 1A 5A 2.6A 2A 2A 5A 2A 40W 42W 42W 42W 26.5W 42W 42W 42W 42W 42W 35W TRIPLE OUTPUT MODELS Max. Output Current 5A 2A 0.8A 5A 2A 0.8A 5A 2A 0.8A 5A 2A 0.8A 5A 1A 0.5A 5A 1A 0.8A 5A 2A 0.8A Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 42W 42W 42W 42W 42W 42W 42W Rev. B DTMPU50 Series Up to 50 Watts Single, Dual, and Triple Outputs AC/DC Medical Desktop Power Supply NOTES 1. For single output models the output voltage is specified as a range (Ex: 40 ~ 50VDC); the preset voltage will be set as standard models if nothing different is requested. Please contact factory for ordering details. 2. Optional output connectors are available (see “DC Output Plug Selector List” link located at the bottom of the “Desktop” category page). DERATING CURVE MECHANICAL DRAWING Unit: inches [mm] Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797