LED - Lamp ELD-880-525-3 15.11.2007 rev. 02 Radiation Type Technology Case Infrared DDH AlGaAs/AlGaAs 5 mm plastic lens Description High-power, high-speed infrared LED in standard 5 mm package, with lens for narrow beam focusing, housing with standoff leads 12,35 1 1 Anode 1 0,5 Cathode 2 1,5 2,75 Note: Special packages without standoff available on request Applications 0,5 2 1 8,6 Ø5 Ø5,75 36,5 +1,0 -1,0 Optical communications, safety equipment, automation Maximum Ratings Tamb = 25°C, unless otherwise specified Parameter Test сonditions Symbol Value Unit IF 150 mA IFM 200 mA PD 200 mW Operating temperature range Tamb -20 to +80 °C Storage temperature range Tstg -40 to +100 °C Tsld 260 °C TJ 100 °C Typ Max Unit VF 1,4 1,8 V 1,6 2,0 V Forward current (DC) (tP ≤ 50 µs, tP /T = 1/2) Peak forward current Power dissipation t < 5s, 3 mm from case Lead soldering temperature Junction temperature Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Test Parameter conditions IF = 20 mA Forward voltage Symbol Min Forward voltage IF = 100 mA VF Reverse voltage IR = 10 µA VR 5 Radiant power IF = 20 mA Φe 7 Radiant power* IF = 100 mA Φe Radiant intensity* IF = 100 mA Ιe Peak wavelength IF = 100 mA λp Spectral bandwidth at 50% IF = 100 mA ∆λ0.5 50 nm Viewing angle IF = 100 mA ϕ 20 deg. Switching time IF = 100 mA tr, tf 10/20 ns V 11 mW 45 mW 150 220 mW/sr 865 880 895 nm *measured after 30s current flow Note: All measurements carried out on EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 1 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545