THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 581-5040. PHONE (630) 851-4722. www.conwin.com PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS CW 0701 FPLD64TE 155.52M SURFACE MOUNT 3.3V LVPECL CLOCK FPLD64TE ABSOLUTE MAXIMUM RATINGS PARAMETER TABLE 1.0 UNITS Storage Temperature Supply Voltage (Vcc) MINIMUM NOMINAL MAXIMUM UNITS -40 - 85 °C -0.5 - 7.0 Vdc MINIMUM NOMINAL MAXIMUM UNITS NOTE 16.384 -20 -40 - MHz ppm °C 1 - 200 20 85 Vdc OPERATING SPECIFICATIONS NOTE DESCRIPTION TABLE 2.0 PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range (Fo) Supply Voltage (Vcc) 3.135 3.3 3.465 Supply Current (Icc) - - 60 mA Jitter (BW=10Hz to 20MHz) - - 5 pS RMS Jitter (BW=12kHz to 20MHz) - - 1 pS RMS MINIMUM NOMINAL MAXIMUM UNITS NOTE - Vdc 2 1.68 Vdc 2 MAXIMUM 50 1.68 55 1 UNITS Ohms Vdc Vdc % nS INPUT CHARACTERISTICS TABLE 3.0 PARAMETER Disable Input Voltage (High) (Vih) 2.275 Enable Input Voltage (Low) (Vil) - - (Voh) (Vol) MINIMUM 2.275 45 - NOMINAL 50 - PECL OUTPUT CHARACTERISTICS TABLE 4.0 PARAMETER LOAD Voltage (High) (Low) Duty Cycle Rise / Fall Time 20% to 80% NOTE 3 The Connor-Winfield FPLD64TE is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±20ppm overall stability. Operating at 3.3V supply voltage, the FPLD64TE provides LVPECL Differential Outputs with Enable/Disable function. FEATURES 3.3V OPERATION LVPECL DIFFERENTIAL OUTPUTS 4 ENABLE / DISABLE FUNCTION LOW JITTER <1pS RMS PACKAGE CHARACTERISTICS Package TABLE 5.0 Non-hermetic package consisting of an FR4 subs trate with grounded metal cover. OVERALL FREQUENCY TOLERANCE: ±20ppm TEMPERATURE RANGE: -40 to 85°C PROCESS RECOMMENDATIONS Solder Reflow Wash SURFACE MOUNT PACKAGE TABLE 6.0 The component solder used internal to this device has a m elting point of 221°C. The peak temperature inside the device should be less t han or equal to 220°C for a maximum of 10 seconds Ultrasonic cleaning is not recommended. Notes 1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the true out put is in a low state (Vol) and the complementary output is in the high stat e (VoH). 3) Output must be terminated int o 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 1.977V TAPE AND REEL PACKAGING ORDERING INFORMATION FPLD64TE CLOCK SERIES - 155.52MHz CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Ec174 PAGE 1 OF 2 REV: 00 DATE: 11/1/02 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 581-5040. PHONE (630) 851-4722. www.conwin.com PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS CW FPLD64TE 155.52M ENABLE / DISABLE N/C GROUND Q OUTPUT Q OUTPUT Vcc Dimensional Tolerance: ±.005” (.127mm) 80% 50% 20% 2 N/C Specifications subject to change without notice. DATA SHEET #: Ec174 PAGE 2 OF 2 REV: 00 DATE: 11/1/02 aCopyright 2001 Connor-Winfield all rights reserved.