规格书编号 SPEC NO : 产品规格书 SPECIFICATION CUSTOMER 客 户： PRODUCT 产 品： SAW FILTER MODEL NO 型 号： HDMIF389A5Dc SIP5Dc PREPARED 编 制： CHECKED 审 核： APPROVED 批 准： D A T E 日 期： 2008-5-13 客户确认 CUSTOMER RECEIVED: 审核 CHECKED 批准 APPROVED 日期 DATE 无锡市好达电子有限公司 Shoulder Electronics Limited www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 1 of 11 SAW FILTER HDMIF389A5Dc SIP5Dc 更改历史记录 History Record 更改日期 Date www.shoulder.cn 规格书编号 Spec. No. Tel:0755-82916880 产品型号 Part No. Fax:0755-82916881 客户产品型号 Customer No. E-mail:[email protected] 更改内容描述 Modify Content 备注 Remark Page 2 of 11 SAW FILTER HDMIF389A5Dc SIP5Dc 1.SCOPE SHOULDER’s SAW filter series have broad line up products meeting all broadcast standard including NTSC,PAL and SECAM systems. These filters are composed of two interdigital transducers on a single-crystal. piezoelectrical chip. they are used in electronic equipments such as TV and so on. 2.Construction 2.1 Dimension and materials Manufacturer’s name : SHOULDER ELECTRONICS Co. LTD(CHINA) Type : MIF389A5Dc 1. Input 2. Switching Input 3. Chip carrier – ground 4. Output 5. Output YY:year WW:week www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 3 of 11 SAW FILTER HDMIF389A5Dc SIP5Dc 2.2. Circuit construction, measurement circuit 3.Characteristics Items Standard atmospheric conditions Operating temperature rang Storage temperature rang Reference temperature Conditions Unless otherwise specified , the standard rang of atmospheric conditions for making measurements and tests is as follows; Ambient temperature : 15℃ to 35℃ Relative humidity : 25% to 85% Air pressure : 86kPa to 106kPa Operating temperature rang is the rang of ambient temperatures in which the filter can be operated continuously. -20℃ ~ +60℃ Storage temperature rang is the rang of ambient temperatures at which the filter can be stored without damage. Conditions are as specified elsewhere in these specifications. -40℃ ~ +70℃ Specifications There shall be no damage. +25℃ 3.1 Maximum Rating DC voltage AC voltage www.shoulder.cn VDC Vpp Tel:0755-82916880 12 10 Fax:0755-82916881 V V Between any terminals E-mail:[email protected] Page 4 of 11 SAW FILTER HDMIF389A5Dc SIP5Dc 3.2 Electrical Characteristics Characteristics in B/G, D /K mode (switching input pin 2 connected to ground pin 3 ) Source impedance Load impedance Item Insertion attenuation Reference level Zs=50Ω ZL=2kΩ//3pF Freq min typ 37.40MHz 15.2 17.2 19.2 dB 38.90MHz 34.47MHz 32.40MHz 32.10MHz Relative attenuation 33.40MHz 30.90MHz 31.90MHz 40.40MHz 41.40MHz 25.00~30.90MHz Sidelobe 40.40~45.00MHz Temperature coefficient 4.2 0.5 11.9 12.1 42.0 21.0 41.0 37.0 35.0 34.0 5.7 2.0 13.9 17.7 14.1 58.0 28.0 54.0 48.0 45.0 41.0 -72 7.2 3.5 15.9 16.1 - dB dB dB dB dB dB dB dB dB dB dB ppm/k TA=25℃ max Characteristics in M/N mode (switching input pin 2 connected to input pin 1 ) Source impedance Load impedance Item Insertion attenuation Reference level Zs=50Ω ZL=2kΩ//3pF Freq min Typ 37.40MHz 15.0 17.0 19.0 dB 38.90MHz 35.32MHz Relative attenuation 34.40MHz 32.90MHz 40.40MHz 25.00~32.90MHz Sidelobe 40.40~45.00MHz Temperature coefficient 4.6 0.1 16.0 40.0 40.0 35.0 32.0 6.1 1.6 18.0 49.0 47.0 42.0 39.0 -72 7.6 3.1 20.0 - dB dB dB dB dB dB dB ppm/k TA=25℃ max 3.3 Environmental Performance Characteristics Item High temperature www.shoulder.cn Condition The specimen shall be store at a temperature of 80±2℃ for 96±4h. Then it shall be subjected to standard atmospheric conditions for 1h, after Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Specifications Page 5 of 11 SAW FILTER Low temperature Humidity Thermal shock Resistance to Soldering heat HDMIF389A5Dc which measurement shall be made within 1h. The specimen shall be store at a temperature of -20±3℃ for 96±4h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. The specimen shall be store at a temperature of 40±2℃ with relative humidity of 90% to 96% for 96±4h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. The specimen shall be subjected to 8 continuous cycles each as shown below. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. Temperature Duration 1 +25 ℃=>-40 ℃ 0.5h 2 -40 ℃ 4h 3 -40 ℃=>+85 ℃ 2h 4 +85 ℃ 4h 5 +85 ℃=>+25 ℃ 0.5h 6 +25 ℃ 1h Reflow soldering method Peak: 255 ±5 ℃, 220 ±5 ℃, 40s At electrode temperature of the specimen. SIP5Dc Mechanical characteristics and specifications in electrical characteristics shall be satisfied. There shall be no excessive change in appearance. The specimen shall be passed through the reflow furnace with the condition shown in the above profile for 1 time. The specimen shall be stored at standard atmospheric conditions for 1h, after which the www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 6 of 11 SAW FILTER Solder ability HDMIF389A5Dc SIP5Dc measurement shall be made. Test board shall be 1.6 mm thick. Base material shall be glass fabric base epoxy resin. Immerse the pins melt solder at 260℃+5/-0℃ More then 95% of for 5 sec. total area of the pins should be covered with solder 焊锡覆盖面积大于 95% 3.4 Mechanical Test Items Conditions Vibration 600-3300rpm amplitude 1.5mm 3 directions 2 H each Drop On maple plate from 1 m high 3 times Lead pull Pull with 1 kg force for 30 seconds Lead bend 90o bending with 500g weigh 2 times 3.5 Voltage Discharge Test Item Condition Surge Between any two electrode Specifications There shall be no damage. Specifications There shall be no damage www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 7 of 11 SAW FILTER HDMIF389A5Dc SIP5Dc 3.6 Frequency response Frequency response in D/K, B/G mode www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 8 of 11 SAW FILTER www.shoulder.cn Tel:0755-82916880 HDMIF389A5Dc Fax:0755-82916881 E-mail:[email protected] SIP5Dc Page 9 of 11 SAW FILTER HDMIF389A5Dc SIP5Dc Frequency response in M/N mode www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 10 of 11 SAW FILTER www.shoulder.cn Tel:0755-82916880 HDMIF389A5Dc Fax:0755-82916881 E-mail:[email protected] SIP5Dc Page 11 of 11