14.2 mm (0.56 inch) General Purpose Blue Seven Segment Displays Technical Data HDSP-50xB Series Features • Industry Standard Size • Industry Standard Pin-Out 15.24 mm (0.6 in.) DIP Leads on 2.54 mm (0.1 in.) Centers • Blue Color • Mitered Font Mitered Corners on Segments • Gray Face Paint Gray Package Gives Optimum Contrast • ± 50° Viewing Angle • Design Flexibility Common Anode or Common Cathode • Categorized for Luminous Intensity Applications • Suitable for Indoor Use • Not Recommended for Industrial Applications, i.e. Operating Temperatures Devices Blue HDSP- Description 501B Common Anode Right Hand Decimal 503B Common Cathode Right Hand Decimal Note: 1. For details, please contact your local Agilent components sales office or an authorized distributor. Requirements Exceeding 80°C or Below –20°C[1] • Extreme Temperature Cycling Not Recommended[1] Description These 14.2 mm (0.56 inch) blue displays use industry standard size and pin-out. The devices are available as either common anode or common cathode. The HDSP-50xB series are suitable for indoor use. Part Numbering System 5082 - X XX X - X X X XX HDSP - X XX X - X X X XX Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Minimum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color[1] B: Blue Device Specification Configuration[1] Refer to Respective Datasheet Package[1] Refer to Respective Datasheet Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details. 2. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 2 Package Dimensions TOP END VIEW ∅ 0.51 TYP. 10 PLCS (0.020) HDSP-XXXX YWW X COO COUNTRY OF ORIGIN 2.54 x 4 = 10.16 (0.100 x 4 = 0.400) 2.540 TYP. 8 PLCS LUMINOUS INTENSITY (0.100) CATEGORY DATE CODE 6.86 (0.270) 7.80 (0.307) 1.37 (0.054) 8.00 (0.315) 10° 14.22 (0.560) 18.60 (0.732) 15.24 (0.600) + 0.5 4.27 – 0.35 (0.169) ∅ 1.59 (0.063) 6.86 (0.270) 4.85 (0.191) 12.50 (0.492) SIDE VIEW FRONT VIEW NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. UNLESS OTHERWISE STATED, TOLERANCES ARE ± 0.25 mm. Internal Circuit Diagram 9 10 8 7 6 9 10 8 7 6 a a f f b b PIN g g e e c c d d DP DP 1 2 3 4 COMMON ANODE 5 1 2 3 4 COMMON CATHODE 5 1 2 3 4 5 6 7 8 9 10 HDSP-501B HDSP-503B COMMON ANODE COMMON CATHODE FUNCTION CATHODE e CATHODE d COMMON ANODE CATHODE c CATHODE DP CATHODE b CATHODE a COMMON ANODE CATHODE f CATHODE g PIN FUNCTION 1 2 3 4 5 6 7 8 9 10 ANODE e ANODE d COMMON CATHODE ANODE c ANODE DP ANODE b ANODE a COMMON CATHODE ANODE f ANODE g 3 Absolute Maximum Ratings at TA=25°C Parameter Power Dissipated per Segment or DP Peak Forward Current per Segment or DP (1/10 Duty Cycle, 0.1 ms Pulse Width) DC Forward Current per Segment or DP[1] Reverse Voltage per Segment or DP Operating Temperature Storage Temperature Wave Soldering Conditions (1.6 mm [0.063 in.] below Body) Symbol PD IPEAK HDSP-501B HDSP-503B 135 70 Units mW mA IF VR TO TS Temperature Time 30[1] 5 –20 to +80 –30 to +85 250 3 mA V °C °C °C s Note: 1. Derate above 25°C at 0.33 mA/°C. Optical/Electrical Characteristics at TA=25°C Devices HDSP- 501B 503B Parameter Luminous Intensity/Segment (Segment Average)[1,2] Forward Voltage/Segment or DP Peak Wavelength Dominant Wavelength[3] Reverse Current/Segment or DP[4] Symbol Iv Min. 2.02 VF λPEAK λd IR Typ. 3.40 3.80 428 466 Test Max. Units Conditions mcd IF = 10 mA 4.50 100 V nm nm µA IF = 20 mA VR = 5 V Notes: 1. Case temperature of the device immediately prior to the intensity measurement is 25°C. 2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 4. Typical specification for reference only. Do not exceed absolute maximum ratings. Intensity Bin Limits[1] (µcd at 10 mA) Bin Name Min.[2] Max.[2] H I J K 2020 2630 3420 4200 2630 3420 4200 5040 Notes: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each bin limit is ± 10%. 30 25 20 15 10 5 0 IF – MAXIMUM AVERAGE CURRENT – mA 1.20 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 20 mA) IF – FORWARD CURRENT PER SEGMENT – mA 35 0 1 2 3 4 5 VF – FORWARD VOLTAGE – V Figure 1. Forward Current vs. Forward Voltage. 1.00 0.80 0.60 0.40 0.20 0 0 5 10 15 20 25 30 IF – FORWARD CURRENT PER SEGMENT – mA Figure 2. Relative Luminous Intensity vs. DC Forward Current. 35 30 25 20 15 10 5 0 10 20 40 60 80 100 TA – AMBIENT TEMPERATURE – °C Figure 3. Maximum Allowable Average Current per Dot vs. Ambient Temperature. Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs please refer to Application Note 1027. Device Reliability For reliability information, please see the reliability data sheet 14.2 mm (0.56 inch) General Purpose Blue Seven Segment Display. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2004 Agilent Technologies, Inc. Obsoletes 5988-0378EN July 17, 2004 5988-8000EN