General purpose (dual digital transistors) EMH10 / UMH10N Structure Epitaxial planar type NPN silicon transistor (Built-in resistor type) Dimensions (Unit : mm) 0.22 Features 1) Two DTC123J chips in a EMT or UMT package. 2) Mounting possible with EMT3 or UMT3 automatic mounting machines. 3) Transistor elements are independent, eliminating interference. 4) Mounting cost and area can be cut in half. (3) (4) (5) (2) 1.2 1.6 (1) 0.5 0.13 (6) 0.5 0.5 1.0 1.6 EMH10 Each lead has same dimensions Abbreviated symbol : H10 ROHM : EMT6 Packaging specifications Taping 1.25 − Absolute maximum ratings (Ta=25C) Limits Unit Supply voltage VCC 50 V Input voltage VIN Power dissipation EMH10,UMH10N 12 IO 100 mA 100 mA Pd ROHM : UMT6 EIAJ : SC-88 V −5 IC (Max.) Output current 2.0 1.3 0.7 Each lead has same dimensions Symbol Parameter 0to0.1 0.1Min. 0.9 2.1 0.15 UMH10N (3) (6) − 0.65 3000 (2) 8000 EMH10 (1) Basic ordering unit (pieces) UMH10N 0.65 TN (4) T2R (5) Type Code 0.2 Package 150 (TOTAL) mW Abbreviated symbol : H10 Equivalent circuit EMH10 / UMH10N (3) (2) (1) R1 R2 ∗ DTr1 DTr2 Junction temperature Tj 150 °C Storage temperature Tstg −55~+150 °C R2 R1 (4) (5) (6) R1=2.2kΩ R2=47kΩ ∗ 120mW per element must not be exceeded. Electrical characteristics (Ta=25C) Parameter Input voltage Output voltage Symbol Min. Typ. Max. VI (off) − − 0.5 Unit VI (on) 1.1 − − VO (on) − 0.1 0.3 V V Conditions VCC=5V, IO=100μA VO=0.3V, IO=5mA IO/II=5mA/0.25mA II − − 3.6 mA VI=5V IO (off) − − 0.5 μA VCC=50V, VI=0V DC current gain GI 80 − − − VO=5V, IO=10mA Transition frequency fT − 250 − MHz Input resistance R1 1.54 2.2 2.86 kΩ − Resistance ratio R2/R1 17 21 26 − − Input current Output current VCE=10V, IE= −5mA, f=100MHz ∗ ∗ Transition frequency of the device www.rohm.com c 2012 ROHM Co., Ltd. All rights reserved. ○ 1/2 2012.05 - Rev.B EMH10 / UMH10N Data Sheet Electrical characteristic curves 100 10m VO=0.3V VO=5V 500 20 10 5 Ta=−40°C 25°C 100°C 2 1 500m 200m 2m DC CURRENT GAIN : GI OUTPUT CURRENT : Io (A) INPUT VOLTAGE : VI (on) (V) 1k VCC=5V 5m 50 1m 500μ Ta=100°C 25°C −40°C 200μ 100μ 50μ 20μ 10μ 500μ 1m 2m 5m 10m 20m 50m100m OUTPUT CURRENT : IO (A) 1 50 20 10 5 2 1μ 0 0.5 1.0 1.5 2.0 2.5 3.0 INPUT VOLTAGE : VI (off) (V) Fig.1 Input voltage vs. output current (ON characteristics) 100 Ta=100°C 25°C −40°C 5μ 2μ 100m 100μ 200μ 200 Fig.2 Output current vs. input voltage (OFF characteristics) 1 100μ 200μ 500μ 1m 2m 5m 10m 20m 50m 100m OUTPUT CURRENT : IO (A) Fig.3 DC current gain vs. output current lO/lI=20 OUTPUT VOLTAGE : VO (on) (V) 500m Ta=100°C 25°C −40°C 200m 100m 50m 20m 10m 5m 2m 1m 100μ 200μ 500μ 1m 2m 5m 10m 20m 50m 100m OUTPUT CURRENT : IO (A) Fig.4 Output voltage vs. output current www.rohm.com c 2012 ROHM Co., Ltd. All rights reserved. ○ 2/2 2012.05 - Rev.B Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. R1120A