Common Mode Filters For high-speed differential signal line (USB2.0, LVDS, etc.) MCZ series Type: MCZ1210AH MCZ2010AH [0504 inch]* [0804 inch] * Dimensions Code [EIA] Issue date: September 2012 • All specifications are subject to change without notice. • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. (1/4) Common Mode Filters For High-speed Differential Signal Line (USB2.0, LVDS, etc.) Conformity to RoHS Directive MCZ Series MCZ1210AH 3 1 2 1 Weight: 3mg 0.3±0.1 L2 T (5) (6) 0.7 to 0.75 4 3 0.5 4 0.55±0.1 PRODUCT IDENTIFICATION MCZ 1210 AH 360 (1) (2) (3) (4) 0.3 1.0±0.15 1.25±0.15 APPLICATIONS • High speed interface(LVDS and USB2.0) in electronics devices. • Digital cellular phones, PCs, DSCs, portable game machines, etc. SHAPES AND DIMENSIONS/ RECOMMENDED PC BOARD PATTERNS 0.5±0.1 FEATURES • Compact sized multilayer common mode filter. • By providing wide bandwidth for differential mode, this product has almost no effect for high-speed differential signals and can suppress the radiated emission. 2 0.25 Dimensions in mm CIRCUIT DIAGRAMS (1) Series name (2) Dimensions LW (3) Product identification number (4) Impedance[at 100MHz] 360: 36 (5) Number of line L2: 2-line (6) Packaging style T: Taping 4 3 1 2 ・No polarity TEMPERATURE RANGE Operating Storage(After mount) –40 to +85°C –40 to +85°C PACKAGING STYLE AND QUANTITIES RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 10s max. 250 to 260˚C Natural cooling 230˚C 180˚C 150˚C Preheating 60 to 120s Soldering 30 to 60s Time(s) Packaging style Taping Quantity 4000 pieces/reel HANDLING AND PRECAUTIONS • Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150°C. • After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. • Do not expose the inductors to stray magnetic fields. • Avoid static electricity discharge during handling. • When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed 350°C. Soldering time should not exceed 3 seconds. • This product does not apply to flow soldering construction method. • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 001-03 / 20120906 / e9712_mcz_ah (2/4) ELECTRICAL CHARACTERISTICS Common mode impedance ( ) [100MHz] 36±25% 90±25% 200±25% 300±25% Part No. MCZ1210AH360L2T MCZ1210AH900L2T MCZ1210AH201L2T MCZ1210AH301L2T DC resistance ( )max.[1 line] 1.00 1.75 4.00 4.50 Rated current Idc(mA)max. 200 100 100 100 Rated voltage Edc(V)max. 5 5 5 5 Insulation resistance (M )min. 10 10 10 10 TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 10000 10000 1000 900 Common mode Impedance(Ω) Impedance(Ω) 1000 360 Common mode 100 301 Common mode 201 Common mode 100 301 Differential mode 10 10 1 1 201 Differential mode 900 Differential mode 10 360 Differential mode 100 1000 Frequency (MHz) 10000 1 1 10 100 Frequency (MHz) 1000 10000 • All specifications are subject to change without notice. 001-03 / 20120906 / e9712_mcz_ah (3/4) Common Mode Filters For High-speed Differential Signal Line (USB2.0, LVDS, etc.) Conformity to RoHS Directive MCZ Series MCZ2010AH 6 5 1 2 3 4 5 0.6 7 6 0.2±0.15 8 7 1 2 0.5 Weight: 5.0mg 0.25±0.1 3 1.8 8 2.0±0.15 0.5±0.1 1.0±0.15 APPLICATIONS • High speed interface(LVDS and USB2.0) in electronics devices. • PDP/LCD/DLP/PJ TVs, DVD players, notebook PCs, DVCs, DSCs, amusement machines, portable audio, digital cellular phones, etc. SHAPES AND DIMENSIONS/ RECOMMENDED PC BOARD PATTERNS 0.5±0.1 FEATURES • Compact sized multilayer common mode filter. • By providing wide bandwidth for differential mode, this product has almost no effect for high-speed differential signals and can suppress the radiated emission. 4 0.25 Dimensions in mm Dimensions in mm PRODUCT IDENTIFICATION MCZ 2010 AH 900 (1) (2) (3) (4) CIRCUIT DIAGRAMS L4 T (5) (6) (1) Series name (2) Dimensions LW (3) Product identification number (4) Impedance[at 100MHz] 900: 90 (5) Number of line L4: 4line (6) Packaging style T: Taping 6 5 1 2 3 4 TEMPERATURE RANGE Operating Storage(After mount) –40 to +85°C –40 to +85°C PACKAGING STYLE AND QUANTITIES 10s max. 250 to 260˚C Natural cooling 180˚C 150˚C Preheating 60 to 120s 7 ・No polarity RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 230˚C 8 Soldering 30 to 60s Time(s) Packaging style Taping Quantity 5000 pieces/reel HANDLING AND PRECAUTIONS • Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150°C. • After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. • Do not expose the inductors to stray magnetic fields. • Avoid static electricity discharge during handling. • When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed 350°C. Soldering time should not exceed 3 seconds. • This product does not apply to flow soldering construction method. • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 001-03 / 20120906 / e9712_mcz_ah (4/4) ELECTRICAL CHARACTERISTICS Common mode impedance ( ) [100MHz] 90±25% 120±25% 200±25% Part No. MCZ2010AH900L4T MCZ2010AH121L4T MCZ2010AH201L4T DC resistance ( )max.[1 line] 1.50 2.00 3.50 Rated current Idc(mA)max. 100 100 100 Rated voltage Edc(V)max. 5 5 5 Insulation resistance (M )min. 10 10 10 TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 10000 10000 1000 121 Common mode Impedance(Ω) Impedance(Ω) 1000 900 Common mode 100 10 10 100 Frequency (MHz) 1000 100 10 121 Differential mode 900 Differential mode 1 1 201 Common mode 10000 1 1 201 Differential mode 10 100 Frequency (MHz) 1000 10000 • All specifications are subject to change without notice. 001-03 / 20120906 / e9712_mcz_ah