Agilent MGA-665P8 GaAs Enhancement-Mode PHEMT 0.5 – 6 GHz Low Noise Amplifier Data Sheet Surface Mount, 2.0 x 2.0 x 0.75 mm 8-lead LPCC Description Agilent’s MGA-665P8 is an economical, easy-to-use GaAs MMIC Low Noise Amplifier (LNA) with a unique active-low powerdown function. The LNA has low noise figure and high gain achieved through the use of Agilent Technologies’ proprietary GaAs Enhancement-mode PHEMT process. It is housed in a miniature 2.0 x 2.0 x 0.75 mm 8-pin Leadless-Plastic-ChipCarrier (LPCC) package. The compact footprint and low profile coupled with low noise, high gain and high linearity makes the MGA-665P8 an ideal choice as an LNA for broadband generalpurpose applications. Its excellent broadband isolation also makes it a good buffer amplifier. The output of the MGA-665P8 provides a very good broadband match to 50 Ω. Its input requires a simple external LC network to provide a low noise figure and good input return loss. Power supply voltage is applied to both the output terminal and a separate VD terminal. A simple external bias insertion circuit consisting of a shunt inductor and a series dc block capacitor is sufficient to apply power supply voltage to the output of the MGA665P8. The MGA-665P8 provides typical device performance of 1.45 dB noise figure, 16 dB gain and an OIP3 of +18.1 dBm at 5.25 GHz, at a bias point of 3 V and 20.5 mA. Pin Configuration, Top View Features • Active-low power-down function • Single +3 V supply operation • Low noise and high gain MMIC • Output 50 Ω match • Excellent isolation • Minimal match and external biasing components • Housed in miniature 2 x 2 x 0.75 mm LPCC package • Pb-free & MSL-1 package Specifications • 0.5 to 6 GHz operation • At 3 V, 20.5 mA, 2.4 GHz: NF = 1.2 dB Gain = 18.4 dB OIP3 = 19 dBm • At 3 V, 20.5 mA, 5.25 GHz: NF = 1.45 dB Gain = 16 dB OIP3 = 18.1 dBm GND PADDLE 1: GND 8: UNUSED 2: RFIN 7: RFOUT & VD 3: GND 6: VD 4: UNUSED 5: POWERDOWN POWER DOWN FUNCITON: LOGIC LOW (0-1 V): POWER ON LOGIC HIGH (2-3 V): POWER OFF NOTES: 1. PINS 1, 3, AND PADDLE NEED TO BE PROPERLY GROUNDED TO OBTAIN SPECIFIED PERFORMANCE. 2. SUPPLY VOLTAGE, VD, NEEDS TO BE APPLIED AT PINS 6 & 7. SUPPLY AT PIN 7 TO BE APPLIED USING A BIAS TEE OR EQUIVALENT. Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model = 40 V ESD Human Body Model = 150 V Refer to Agilent Application Note A004R: Electrostatic Discharge, Damage and Control. 1. Absolute Maximum Ratings[1] Symbol Parameter Units Absolute Maximum VD Supply Voltage[2] V 6 VC Control Voltage[2] V 6 mA 45.6 W 0.27 ID Drain Current[2] Dissipation[3] Pdiss Total Power Pin max. RF Input Power dBm 13 TCH Channel Temperature °C 150 TSTG Storage Temperature °C -65 to 150 qch_b Resistance[4] °C/W 44.76 Thermal Notes: 1. Operation of this device above any one of these parameters may cause permanent damage. 2. DC quiescent conditions. 3. Board (package belly) temperature TB is 25°C. Derate 29 mW/°C for TB > 133°C. 4. Channel-to-board thermal resistance measured using 150°C Liquid Crystal Measurement method. 2. Product Consistency Distribution Charts at 5.25 GHz, 3.0 V, Id = 20.5 mA[5,6] 160 180 Stdev = 0.23 Stdev = 0.067 150 +3 Std 80 FREQUENCY FREQUENCY 120 120 –3 Std 90 60 40 30 0 0 1.2 1.3 1.4 1.5 1.6 17 1.7 17.5 18 18.5 19 OIP3 (dB) NF (dB) Figure 2. OIP3; LSL = 17.8, nominal = 18.2. Figure 1. NF; nominal = 1.45. 400 180 Stdev = 0.20 Stdev = 0.11 150 –3 Std 90 FREQUENCY FREQUENCY 300 120 +3 Std 60 –3 Std 200 +3 Std 100 30 0 0 15 16 GAIN (dB) Figure 3. Gain (dB); nominal = 16 dB. 17 11 11.5 12 P1dB (dB) Figure 4. P1dB; LSL = 11, nominal = 11.4. Notes: 5. Distribution data sample size is 500 samples taken from 3 different wafers lots. Future wafers allocated to this product may have nominal values anywhere between the upper and lower limits. 6. Measurements are made on production test board described in Figure 5, which represents a trade-off between optimal OIP3, P1dB, Gain and NF. Circuit losses have been de-embedded from actual measurements 2 3. MGA-665P8 Electrical Specifications TA = 25°C, DC Bias for RF Parameter is VD = 3.0 V (unless otherwise specified) Symbol Parameter and Test Condition Units Min. Typ. Max. VC Control Voltage V - ON: 0–1 V Off: 2–3 V - ID Device Current mA 18.2 20.5 23.8 ID (Off) Off current VC = 3 V µA - 180 220 Gtest[7] Gain Freq = 5.25 GHz dB 14.5 16 17.5 NFtest[7] Noise Figure Freq = 5.25 GHz dB - 1.45 1.9 OIP3test[7,8] Output Third Order Intercept Point Freq = 5.25 GHz dBm 16.5 18.2 - P1dBtest[7] Output Power at 1dB Gain Compression Freq = 5.25 GHz dBm - 11.4 - Psattest[7] Output Power at Saturation Freq = 5.25 GHz dBm - 15 - IRLtest[7] Input return Loss Freq = 5.25 GHz dB - 18 - ORLtest[7] Output Return Loss Freq = 5.25 GHz dB - 20 - Ga[8] Associated Gain at NFo Freq = 0.9 GHz Freq = 2.4 GHz Freq = 3.5 GHz Freq = 5.25 GHz Freq = 5.8 GHz dB - 22.58 18.42 16.99 16.00 17.16 - NFo[8] Optimum Noise Figure (Tuned for Lowest Noise Figure) Freq = 0.9 GHz Freq = 2.4 GHz Freq = 3.5 GHz Freq = 5.25 GHz Freq = 5.8 GHz dB - 1.30 1.18 1.36 1.45 1.44 - OIP3[8,9] Output Third Order Intercept Point at NFo Freq = 0.9 GHz Freq = 2.4 GHz Freq = 3.5 GHz Freq = 5.25 GHz Freq = 5.8 GHz dBm - 21.26 19.02 17.30 18.10 17.89 - P1dB[8] Output Power at 1 dB Gain Compression Point at NFo Freq = 0.9 GHz Freq = 2.4 GHz Freq = 3.5 GHz Freq = 5.25 GHz Freq = 5.8 GHz dBm - 8.62 7.41 6.89 7.80 8.32 - Notes: 7. Measurements obtained using production test board described in Figure 5, which represents a trade-off between optimal OIP3, P1dB, Gain and NF. Circuit losses have been de-embedded from actual measurements. 8. Measurements obtained using test fixture with input tuned for low noise figure. Gain, OIP3 and P1dB were measured at this tuned condition. Tuner and fixture losses have been de-embedded from actual measurements. The supply is connected to ground via a bypass capacitor. The OIP3 is approximately 3 dB lower without this bypass capacitor. 9. OIP3 test condition: Pin = -20 dBm, Df = f1 – f2 = 10 MHz. 3 8.2 nH 1000 pF VD = 3 V 9.1 Ω 2.2 nH 3 pF 0.6 pF 1 nH RFIN RF0UT 0.2 pF Figure 5: Simplified schematic of 5.25 GHz production test board, which represents a tradeoff between Gain, NF, OIP3, P1dB and return loss measurements. Circuit losses have been deembedded from actual measurements. 4. MGA-665P8 DC Performance Curves (at 25°C unless specified otherwise) 40 25 35 2.7 V 3.0 V 3.3 V 20 CURRENT (mA) CURRENT (mA) 30 25 20 15 10 15 -40°C 25°C 85°C 10 5 1.5 2.0 2.5 3.0 3.5 4.0 VOLTAGE (V) Figure 6. Current vs. supply voltage. 4 4.5 5 5.0 0 0 0.5 1.0 1.5 2.0 CONTROL VOLTAGE (V) Figure 7. Current vs. control voltage. 2.5 3.0 1.8 24 1.6 22 1.4 20 22 20 1.2 1.0 OIP3 (dB) 18 GAIN (dB) NOISE FIGURE (dB) 5. MGA-665P8 Performance Curves Tuned For NFmin at VD = 3.0 V, VC = 0 V, ID = 20.5 mA[10] (at 25°C unless specified otherwise) 18 16 14 14 0.8 -40°C 25°C 85°C 0.6 12 -40°C 25°C 85°C Figure 8. Minimum noise figure vs. frequency and temperature. FREQUENCY (GHz) Figure 9. Associated gain measured at NFmin tuned condition vs. frequency and temperature. Figure 10. Output third order intercept point measured at NFmin tuned condition vs. frequency and temperature. 24 9 1.6 22 8 1.4 20 6 5 4 -40°C 25°C 85°C GAIN (dB) 1.8 NOISE FIGURE (dB) 10 7 1.2 1.0 0.8 0.4 0.5 Figure 11. Output power for 1 dB gain compression measured at NFmin tuned condition vs. frequency and temperature. 16 1.5 2.5 3.5 4.5 12 5.5 FREQUENCY (GHz) FREQUENCY (GHz) 18 14 2.7 V 3.0 V 3.3 V 0.6 3 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 -40°C 25°C 85°C 10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz) FREQUENCY (GHz) P1dB (dB) 12 10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 0.4 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 16 2.7 V 3.0 V 3.3 V 10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz) Figure 12. Minimum noise figure vs. frequency and voltage. Figure 13. Associated gain measured at NFmin tuned condition vs. frequency and voltage. 10 22 9 20 8 P1dB (dB) OIP3 (dB) 18 16 14 7 6 5 2.7 V 3.0 V 3.3 V 12 10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz) Figure 14. Output third order intercept point measured at NFmin tuned condition vs. frequency and voltage. 2.7 V 3.0 V 3.3 V 4 3 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz) Figure 15. Output power for 1 dB gain compression measured at NFmin tuned condition vs. frequency and voltage. Note: 10. Measurements obtained using test fixture with input tuned for low noise figure with a double stub tuner. Gain, OIP3 and P1dB were measured at this tuned condition. Tuner and fixture losses have been de-embedded from actual measurements. The supply is connected to ground via a bypass capacitor. The OIP3 is approximately 3dB lower without this bypass capacitor. 5 2.2 24 22 2.0 22 20 1.8 20 1.6 1.4 18 16 -40°C 25°C 85°C 12 FREQUENCY (GHz) FREQUENCY (GHz) Figure 16. Noise figure (50 Ω) vs. frequency and temperature. Figure 17. Gain (50 Ω) vs. frequency and temperature. Figure 18. Output third order intercept point (50 Ω) vs. frequency and temperature. 24 9 1.8 22 8 1.6 20 6 5 -40°C 25°C 85°C 4 3 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz) Figure 19. Output power for 1 dB gain compression (50 Ω) vs. frequency and temperature. GAIN (dB) 2.0 NOISE FIGURE (dB) 10 7 -40°C 25°C 85°C 10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz) P1dB (dB) -40°C 25°C 85°C 12 0.8 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 16 14 14 1.2 1.0 6 18 OIP3 (dB) GAIN (dB) NOISE FIGURE (dB) 6. MGA-665P8 Performance Curves with 50 Ω Input and Output at VD = 3.0 V, VC = 0 V, ID = 20.5 mA[11] (at 25°C unless specified otherwise) 1.4 1.2 1.0 18 16 14 2.7 V 3.0 V 3.3 V 0.8 0.6 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz) Figure 20. Noise figure (50 Ω) vs. frequency and voltage. 2.7 V 3.0 V 3.3 V 12 10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz) Figure 21. Gain (50 Ω) vs. frequency and voltage. 20 P1dB (dB) OIP3 (dB) 25 9 15 8 18 16 14 12 10 S-PARAMETERS (dB) 22 7 6 5 2.7 V 3.0 V 3.3 V 2.7 V 3.0 V 3.3 V 4 3 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz) FREQUENCY (GHz) Figure 22. Output third order intercept point (50 Ω) vs. frequency and temperature. Figure 23. Output power for 1 dB gain compression (50 Ω) vs. frequency and voltage. 20 5 -5 -15 -25 S22 S21 S11 -35 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz) Figure 24. S-Parameters (50 Ω) vs. frequency. 6 5 15 VSWR_IN VSWR_OUT VSWR (n:1) Pout (dBm) 4 10 5 3 2 Pout vs. Pin GAIN P1dB 0 -5 -20 -15 -10 -5 0 5 1 10 Pin (dBm) Figure 25. Output power and gain vs. input power at 5.25 GHz. 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz) Figure 26. Input and output VSWR (50 Ω) vs. frequency. Note: 11. Measurements obtained using a 50 Ω test fixture with input and output connected directly to the fixture. Gain, OIP3 and P1dB were measured at this 50 Ω condition. 7 7. MGA-665P8 Typical Scattering Parameters, TC = 25°C, ZO = 50 Ω, VD = 3 V, VC = 0 V, ID = 20.5 mA (ON State)[12] Freq S11 S21 S12 S22 (GHz) dB Ang (deg) dB Ang (deg) dB Ang (deg) dB Ang (deg) K-factor 0.1 -0.25 -12.7 15.56 43.5 -60.00 114.3 -10.17 -39.8 ∞ 0.5 -3.06 -43.6 21.14 0.9 -60.00 104.2 -13.64 -18.8 ∞ 1.0 -6.47 -60.0 21.60 -41.0 -60.00 101.8 -14.38 -23.2 30.94 1.5 -8.71 -70.1 20.63 -71.4 -53.98 100.7 -15.28 -31.9 19.48 2.0 -9.92 -79.8 19.48 -95.6 -53.98 94.4 -17.27 -39.4 23.35 2.2 -10.43 -80.6 19.00 -104.3 -50.46 93.6 -18.06 -41.9 16.71 2.4 -10.81 -82.8 18.60 -112.5 -50.46 90.8 -18.56 -45.9 17.69 2.6 -10.87 -85.3 18.18 -120.3 -50.46 89.2 -19.41 -49.2 18.63 2.8 -11.21 -86.9 17.83 -128.1 -47.96 91.5 -20.00 -53.7 14.68 3.0 -11.15 -87.1 17.47 -135.3 -47.96 89.1 -21.01 -57.4 15.31 3.5 -11.06 -91.1 16.74 -153.1 -46.02 84.8 -22.85 -62.4 13.34 4.0 -10.12 -95.5 16.08 -170.1 -43.10 74.6 -26.20 -74.7 10.11 4.5 -9.47 -97.1 15.85 171.4 -40.92 83.7 -23.61 -88.6 7.92 5.0 -8.18 -105.0 15.64 154.2 -40.00 67.7 -24.01 -105.7 6.98 5.2 -7.68 -107.0 15.80 146.6 -40.00 70.3 -23.22 -106.5 6.70 5.4 -6.84 -110.0 15.92 137.7 -39.17 70.1 -21.94 -114.1 5.73 5.6 -6.02 -116.6 15.95 128.2 -38.42 66.2 -21.62 -129.5 4.95 5.8 -5.50 -122.8 15.99 118.4 -37.72 61.9 -21.83 -137.6 4.35 6.0 -5.29 -131.6 15.89 107.6 -37.72 57.5 -24.15 -149.1 4.33 7.0 -4.07 -176.2 13.91 51.1 -36.48 45.9 -18.56 175.5 3.99 8.0 -6.82 145.9 8.74 1.9 -33.98 9.9 -18.42 156.6 7.11 9.0 -10.75 105.8 3.65 -30.7 -37.08 30.5 -16.42 115.7 20.97 10.0 -14.80 69.1 -1.02 -56.3 -31.37 -7.1 -13.15 94.7 19.14 11.0 -23.35 11.8 -5.80 -79.7 -27.96 -46.2 -11.21 79.5 22.41 12.0 -21.41 1.7 -11.15 -95.8 -40.00 -35.5 -9.76 75.1 160.24 13.0 -14.29 -128.0 -13.94 -100.4 -27.74 -55.3 -8.27 67.8 49.64 14.0 -7.391 170.2 -13.07 -123.0 -21.41 -106.8 -7.41 59.7 17.56 15.0 -5.65 121.1 -13.43 -170.4 -19.33 -159.0 -7.35 52.1 12.69 16.0 -7.45 88.6 -12.92 138.4 -17.14 158.4 -7.33 45.7 10.47 17.0 -13.56 97.3 -11.57 87.6 -15.39 117.3 -7.64 37.3 8.75 18.0 -6.06 130.6 -10.23 31.6 -14.11 66.8 -7.74 31.6 4.98 8 8. MGA-665P8 Typical Noise Parameters, TC = 25°C, ZO = 50 Ω, VD = 3 V, VC = 0 V, ID = 20.5 mA[12] Gamma Opt Mag Ang (deg) Rn @ 50 ohm NF50 (dB) 0.5 1.48 0.61 26.8 0.61 2.49 1.0 1.27 0.54 32.1 0.35 1.83 1.5 1.10 0.53 42.0 0.30 1.62 2.0 1.08 0.55 44.3 0.31 1.65 2.4 1.18 0.50 53.2 0.29 1.67 2.8 1.24 0.48 61.3 0.27 1.70 3.2 1.32 0.45 69.3 0.24 1.71 3.5 1.36 0.43 75.9 0.23 1.73 4.0 1.45 0.37 88.6 0.20 1.74 4.5 1.50 0.34 97.9 0.18 1.75 5.0 1.46 0.34 102.9 0.16 1.69 5.2 1.42 0.35 107.8 0.15 1.67 5.4 1.42 0.35 111.3 0.14 1.66 5.6 1.40 0.36 114.3 0.13 1.65 5.8 1.40 0.36 120.1 0.13 1.67 6.0 1.46 0.34 128.3 0.13 1.72 7.0 2.08 0.36 148.2 0.11 2.37 8.0 3.35 0.30 176.0 0.14 3.55 9.0 5.50 0.21 -150.6 0.36 5.61 10.0 8.74 0.11 -106.6 1.00 8.77 25 6 20 5 15 10 5 4 MAG GAIN NFmin NF50 3 2 1 0 0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 8.5 9.5 9 NOISE FIGURE (dB) NFmin (dB) GAIN (dB) Freq (GHz) 9. MGA-665P8 Typical Scattering Parameters, TC = 25°C, ZO = 50 Ω, VD = 3 V, VC = 3 V, ID = 180 µA (OFF State)[12] Freq S11 S21 S12 S22 (GHz) dB Ang (deg) dB Ang (deg) dB Ang (deg) dB Ang (deg) 0.1 -0.04 -2.2 -50.46 100.6 -53.98 70.9 -0.09 -1.9 0.5 -0.26 -8.2 -46.02 66.3 -46.02 55.5 -0.10 -8.4 1.0 -0.27 -15.6 -43.10 58.7 -41.94 53.5 -0.26 -17.0 1.5 -0.34 -23.3 -39.17 51.7 -39.17 51.6 -0.54 -25.8 2.0 -0.37 -32.9 -37.08 44.3 -37.08 45.4 -0.91 -33.1 2.2 -0.40 -36.0 -35.92 46.8 -36.48 44.6 -1.05 -36.5 2.4 -0.46 -38.9 -35.92 44.4 -35.39 42.5 -1.19 -40.2 2.6 -0.51 -42.2 -34.89 37.8 -34.89 38.6 -1.36 -43.3 2.8 -0.55 -44.9 -34.42 40.0 -34.42 38.3 -1.55 -47.4 3.0 -0.47 -48.0 -33.15 35.5 -33.98 35.2 -1.81 -50.5 3.5 -0.52 -55.4 -33.56 29.6 -33.15 27.2 -2.27 -58.9 4.0 -0.57 -62.3 -30.17 23.2 -29.90 23.4 -2.95 -65.3 4.5 -0.47 -69.3 -29.37 17.6 -29.63 18.3 -3.56 -75.8 5.0 -0.41 -76.0 -28.18 7.5 -28.40 5.6 -4.17 -80.6 5.2 -0.28 -78.3 -28.40 5.5 -28.18 4.4 -4.25 -83.6 5.4 -0.05 -81.2 -27.54 2.2 -27.74 2.5 -4.39 -87.1 5.6 0.04 -86.1 -27.13 0.5 -26.94 -1.5 -4.67 -90.0 5.8 0.02 -89.6 -26.20 -5.3 -26.38 -5.8 -4.87 -92.6 6.0 -0.48 -94.1 -26.02 -10.3 -26.02 -10.8 -5.26 -95.6 7.0 -1.03 -111.8 -19.58 -46.8 -19.66 -47.2 -6.02 -114.4 8.0 -0.98 -119.5 -28.18 -141.7 -28.40 -142.7 -6.80 -113.8 9.0 -1.77 -137.0 -28.87 -102.7 -26.94 -110.8 -7.19 -130.3 10.0 -1.45 -143.7 -32.04 170.5 -33.15 165.2 -7.90 -150.5 11.0 -1.72 -166.6 -34.89 148.1 -37.72 145.6 -9.09 179.6 12.0 -2.50 173.7 -37.08 97.0 -37.08 105.5 -8.20 166.6 13.0 -2.56 155.8 -24.88 -0.2 -25.04 1.3 -7.23 136.5 14.0 -3.25 145.4 -16.25 -75 -15.97 -74.9 -7.92 120.9 15.0 -2.03 126.4 -15.65 -138.4 -15.55 -137.8 -5.97 112.6 16.0 -2.15 102.9 -13.85 -172.9 -13.94 -172.1 -5.10 95.7 17.0 -4.45 75.0 -10.17 147.1 -10.31 147.6 -5.76 75.8 18.0 -8.45 108.0 -8.64 75.1 -8.68 75.9 -7.92 78.8 Note: 12. Measurements are made to the package leads as the reference plane. 10 Device Models Refer to Agilent’s Web Site www.agilent.com/view/rf Part Number Ordering Information Part Number No. of Devices Container MGA-665P8-TR1 3000 7” Reel MGA-665P8-TR2 10000 13” Reel MGA-665P8-BLK 100 antistatic bag 2x2 LPCC (JEDEC DFP-N) Package Dimensions D1 P PIN 1 D PIN 1 8 1 b A 1AX e BOTTOM VIEW L 7 2 R E1 6 4 5 TOP VIEW A A1 A2 SIDE VIEW SYMBOL A A1 A2 b D D1 E E1 e MIN. 0.70 0.00 0.225 1.9 0.65 1.9 1.45 DIMENSIONS NOM. 0.75 0.02 0.203 REF 0.25 2.0 0.80 2.0 1.6 0.50 BSC. END VIEW MAX. 0.80 0.05 0.275 2.1 0.95 2.1 1.75 NOTE: MEASUREMENTS ARE IN MILLIMETERS. 11 E 3 PCB Land Pattern and Stencil Design 2.80 (110.24) 2.72 (107.09) 0.70 (27.56) 0.63 (24.80) 0.22 (8.86) 0.25 (9.84) 0.32 (12.79) 0.25 (9.84) PIN 1 PIN 1 ∅0.20 (∅7.87) 0.50 (19.68) 0.50 (19.68) 0.28 (10.83) SOLDER MASK 0.25 (9.74) 1.60 (62.99) 0.63 (24.80) 0.60 (23.62) 0.72 (28.35) 0.80 (31.50) RF TRANSMISSION LINE 0.15 (5.91) 0.55 (21.65) STENCIL LAYOUT (TOP VIEW) PCB LAND PATTERN (TOP VIEW) NOTE: TYPICAL STENCIL THICKNESS IS 5 MILS. MEASUREMENTS ARE IN MILLIMETERS (MILS). Device Orientation REEL 4 mm CARRIER TAPE 8 mm 1AX USER FEED DIRECTION COVER TAPE 12 1AX 1AX 1AX 1.54 (60.61) Tape Dimensions P D P0 P2 E F W D1 t1 10° MAX. Tt K0 10° MAX. A0 CAVITY PERFORATION CARRIER TAPE COVER TAPE DISTANCE 13 B0 DESCRIPTION SYMBOL SIZE (mm) SIZE (inch) LENGTH A0 2.30 ± 0.05 0.091 ± 0.004 WIDTH B0 2.30 ± 0.05 0.091 ± 0.004 DEPTH K0 1.00 ± 0.05 0.039 ± 0.002 PITCH P 4.00 ± 0.10 0.157 ± 0.004 BOTTOM HOLE DIAMETER D1 1.00 ± 0.25 0.039 ± 0.002 DIAMETER D 1.50 ± 0.10 0.060 ± 0.004 PITCH P0 4.00 ± 0.10 0.157 ± 0.004 POSITION E 1.75 ± 0.10 0.069 ± 0.004 WIDTH W 8.00 + 0.30 0.315 ± 0.012 8.00 – 0.10 0.315 ± 0.004 THICKNESS t1 0.254 ± 0.02 0.010 ± 0.0008 WIDTH C 5.4 ± 0.10 0.205 ± 0.004 TAPE THICKNESS Tt 0.062 ± 0.001 0.0025 ± 0.0004 CAVITY TO PERFORATION (WIDTH DIRECTION) F 3.50 ± 0.05 0.138 ± 0.002 CAVITY TO PERFORATION (LENGTH DIRECTION) P2 2.00 ± 0.05 0.079 ± 0.002 www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2005 Agilent Technologies, Inc. February 2, 2005 5989-2314EN