Freescale Semiconductor Technical Data NOT RECOMMENDED FOR NEW DESIGN Heterojunction Bipolar Transistor Technology (InGaP HBT) MMG3003NT1 Broadband High Linearity Amplifier The MMG3003NT1 is a General Purpose Amplifier that is internally input matched and internally output prematched. It is designed for a broad range of Class A, small - signal, high linearity, general purpose applications. It is suitable for applications with frequencies from 40 to 3600 MHz such as Cellular, PCS, BWA, WLL, PHS, CATV, VHF, UHF, UMTS and general small - signal RF. 40 - 3600 MHz, 20 dB 24 dBm InGaP HBT Features • Frequency: 40 - 3600 MHz • P1dB: 24 dBm @ 900 MHz • Small - Signal Gain: 20 dB @ 900 MHz • Third Order Output Intercept Point: 40.5 dBm @ 900 MHz • Single Voltage Supply • Internally Matched to 50 Ohms • Low Cost SOT - 89 Surface Mount Package • RoHS Compliant • In Tape and Reel. T1 Suffix = 1000 Units per 12 mm, 7 inch Reel. Table 1. Typical Performance (1) 3 CASE 1514 - 02, STYLE 1 SOT - 89 PLASTIC Table 2. Maximum Ratings Characteristic Symbol 900 MHz 2140 MHz 3500 MHz Unit Small - Signal Gain (S21) Gp 20 16.9 12 dB Input Return Loss (S11) IRL - 15 - 14.1 - 11.2 dB Output Return Loss (S22) ORL - 9.3 −14.5 - 10.2 dB Power Output @1dB Compression P1db 24 23.3 20.5 dBm IP3 40.5 40 37 dBm Third Order Output Intercept Point 12 Rating Symbol Value Unit Supply Voltage VCC 7 V Supply Current ICC 400 mA RF Input Power Pin 15 dBm Storage Temperature Range Tstg - 65 to +150 °C Junction Temperature (2) TJ 150 °C 2. For reliable operation, the junction temperature should not exceed 150°C. 1. VCC = 6.2 Vdc, TC = 25°C, 50 ohm system Table 3. Thermal Characteristics (VCC = 6.2 Vdc, ICC = 180 mA, TC = 25°C) Characteristic Thermal Resistance, Junction to Case Symbol Value (3) Unit RθJC 31.6 °C/W NOT RECOMMENDED FOR NEW DESIGN Document Number: MMG3003NT1 Rev. 7, 3/2008 3. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf. Select Documentation/Application Notes - AN1955. © Freescale Semiconductor, Inc., 2004-2008. All rights reserved. RF Device Data Freescale Semiconductor MMG3003NT1 1 Characteristic NOT RECOMMENDED FOR NEW DESIGN Symbol Min Typ Max Unit Small - Signal Gain (S21) Gp 19.3 20 — dB Input Return Loss (S11) IRL — - 15 — dB Output Return Loss (S22) ORL — - 9.3 — dB Power Output @ 1dB Compression P1dB — 24 — dBm Third Order Output Intercept Point IP3 — 40.5 — dBm Noise Figure NF — 4 — dB Supply Current (1) ICC 160 180 205 mA Supply Voltage (1) VCC — 6.2 — V 1. For reliable operation, the junction temperature should not exceed 150°C. NOT RECOMMENDED FOR NEW DESIGN Table 4. Electrical Characteristics (VCC = 6.2 Vdc, 900 MHz, TC = 25°C, 50 ohm system, in Freescale Application Circuit) MMG3003NT1 2 RF Device Data Freescale Semiconductor Table 5. Functional Pin Description 2 Pin Function 1 RFin 2 Ground 3 RFout/DC Supply 1 2 3 Figure 1. Functional Diagram Table 6. ESD Protection Characteristics Test Conditions/Test Methodology Class Human Body Model (per JESD 22 - A114) 1B (Minimum) Machine Model (per EIA/JESD 22 - A115) A (Minimum) Charge Device Model (per JESD 22 - C101) IV (Minimum) Table 7. Moisture Sensitivity Level Test Methodology Per JESD 22 - A113, IPC/JEDEC J - STD - 020 Rating Package Peak Temperature Unit 1 260 °C NOT RECOMMENDED FOR NEW DESIGN NOT RECOMMENDED FOR NEW DESIGN Pin Number MMG3003NT1 RF Device Data Freescale Semiconductor 3 50 OHM TYPICAL CHARACTERISTICS 25 0 −10 15 −20 S11 VCC = 6.2 Vdc ICC = 180 mA 10 −30 0 1 2 3 4 2 3 4 f, FREQUENCY (GHz) Figure 2. Small - Signal Gain (S21) versus Frequency Figure 3. Input/Output Return Loss versus Frequency 23 900 MHz, C5 = 2.7 pF 19 1960 MHz, C5, C6 = 1.3 pF 17 2140 MHz, C5, C6 = 1.3 pF 15 2600 MHz, C5 = 1.2 pF 13 3500 MHz, C5 = 0.5 pF 11 VCC = 6.2 Vdc ICC = 180 mA 9 5 10 15 20 P1dB, 1 dB COMPRESSION POINT (dBm) 25 21 24 23 22 21 20 19 VCC =6.2 Vdc ICC = 180 mA 18 17 0.5 25 1 1.5 2 2.5 3 Pout, OUTPUT POWER (dBm) f, FREQUENCY (GHz) Figure 4. Small - Signal Gain versus Output Power Figure 5. P1dB versus Frequency 200 150 100 50 0 4 4.5 5 5.5 6 VCC, COLLECTOR VOLTAGE (V) Figure 6. Collector Current versus Collector Voltage 6.5 IP3, THIRD ORDER OUTPUT INTERCEPT POINT (dBm) Gp, SMALL−SIGNAL GAIN (dB) 1 0 f, FREQUENCY (GHz) 3.5 45 42 39 36 VCC = 6.2 Vdc ICC = 180 mA 100 kHz Tone Spacing 33 30 0 1 2 3 NOT RECOMMENDED FOR NEW DESIGN −40°C 20 S11, S22(dB) Gp, SMALL−SIGNAL GAIN (dB) S22 25°C VCC = 6.2 Vdc ICC, COLLECTOR CURRENT (mA) NOT RECOMMENDED FOR NEW DESIGN TC = 85°C 4 f, FREQUENCY (GHz) Figure 7. Third Order Output Intercept Point versus Frequency MMG3003NT1 4 RF Device Data Freescale Semiconductor 42 39 36 33 f = 900 MHz 100 kHz Tone Spacing 30 6 5.8 6.2 6.4 6.6 VCC, COLLECTOR VOLTAGE (V) 42 41 40 39 −40 −20 0 20 40 60 80 100 T, TEMPERATURE (_C) Figure 9. Third Order Output Intercept Point versus Case Temperature Figure 8. Third Order Output Intercept Point versus Collector Voltage 105 −30 MTTF (YEARS) −40 −50 −60 −70 103 −80 9 12 15 18 21 24 120 125 130 135 140 145 150 Pout, OUTPUT POWER (dBm) TJ, JUNCTION TEMPERATURE (°C) Figure 10. Third Order Intermodulation versus Output Power Figure 11. MTTF versus Junction Temperature 8 6 4 2 VCC = 6.2 Vdc ICC = 180 mA 0 0 104 VCC = 6.2 Vdc ICC = 180 mA f = 900 MHz 100 kHz Tone Spacing 0.5 1 1.5 2 2.5 3 3.5 NOTE: The MTTF is calculated with VCC = 6.2 Vdc, ICC = 180 mA ACPR, ADJACENT CHANNEL POWER RATIO (dBc) IMD, THIRD ORDER INTERMODULATION DISTORTION (dBc) VCC = 6.2 Vdc f = 900 MHz 100 kHz Tone Spacing 8 Vdc Supply with 10 W Dropping Resistor 4 −20 VCC = 6.2 Vdc, ICC = 180 mA, f = 2140 MHz, C5 = 1.3 pF Single−Carrier W−CDMA, 3.84 MHz Channel Bandwidth Input Signal PAR = 8.5 dB @ 0.01% Probability (CCDF) −30 −40 −50 −60 NOT RECOMMENDED FOR NEW DESIGN IP3, THIRD ORDER OUTPUT INTERCEPT POINT (dBm) IP3, THIRD ORDER OUTPUT INTERCEPT POINT (dBm) 45 NF, NOISE FIGURE (dB) NOT RECOMMENDED FOR NEW DESIGN 50 OHM TYPICAL CHARACTERISTICS −70 9 11 13 15 17 f, FREQUENCY (GHz) Pout, OUTPUT POWER (dBm) Figure 12. Noise Figure versus Frequency Figure 13. Single - Carrier W - CDMA Adjacent Channel Power Ratio versus Output Power 19 MMG3003NT1 RF Device Data Freescale Semiconductor 5 50 OHM APPLICATION CIRCUIT: 40- 800 MHz VSUPPLY C4 L1 RF INPUT Z1 DUT Z2 C1 Z1 Z2 Z3 Z4 0.347″ 0.575″ 0.172″ 0.403″ Z3 Z4 Z6 C2 VCC x 0.058″ Microstrip x 0.058″ Microstrip x 0.058″ Microstrip x 0.058″ Microstrip Z5 Z5 Z6 PCB RF OUTPUT C5 0.286″ x 0.058″ Microstrip 0.061″ x 0.058″ Microstrip Getek Grade ML200C, 0.031″, εr = 4.1 Figure 14. 50 Ohm Test Circuit Schematic 30 S21 20 R1 C4 C3 10 L1 0 C2 C1 S22 −10 C5 −20 VCC = 6.2 Vdc ICC = 180 mA S11 −30 200 0 400 600 MMG30XX Rev 2 800 f, FREQUENCY (MHz) Figure 15. S21, S11 and S22 versus Frequency Figure 16. 50 Ohm Test Circuit Component Layout Table 8. 50 Ohm Test Circuit Component Designations and Values Part Description Part Number Manufacturer C1, C2, C4 0.01 μF Chip Capacitors C0603C103J5RAC Kemet C3 68 pF Chip Capacitor C0805C680J5RAC Kemet C5 (1) 2.7 pF Chip Capacitor 12105J2R7BS AVX L1 470 nH Chip Inductor BK2125HM471 - T Taiyo Yuden R1 7.5 W Chip Resistor RK73B2ATTE7R5J KOA Speer 1. Tuning capacitor: Capacitor value and location on the transmission line are varied for different frequencies. Table 9. Supply Voltage versus R1 Values Supply Voltage 7 8 9 10 11 12 V R1 Value 4.4 10 15.6 21 27 32 Ω NOT RECOMMENDED FOR NEW DESIGN C3 S21, S11, S22 (dB) NOT RECOMMENDED FOR NEW DESIGN R1 Note: To provide VCC = 6.2 Vdc and ICC = 180 mA at the device. MMG3003NT1 6 RF Device Data Freescale Semiconductor 50 OHM APPLICATION CIRCUIT: 800 - 1100 MHz VSUPPLY C4 L1 RF INPUT Z1 DUT Z2 C1 Z1, Z6 Z2 Z3 Z3 Z4 0.347″ x 0.058″ Microstrip 0.575″ x 0.058″ Microstrip 0.172″ x 0.058″ Microstrip Z4 Z5 PCB Z6 Z5 C5 VCC RF OUTPUT C2 0.333″ x 0.058″ Microstrip 0.07″ x 0.058″ Microstrip Getek Grade ML200C, 0.031″, εr = 4.1 Figure 17. 50 Ohm Test Circuit Schematic 30 S21 20 R1 10 C4 C3 0 L1 S22 −10 C2 C1 C5 −20 S11 −30 VCC = 6.2 Vdc ICC = 180 mA −40 600 700 800 900 1000 1100 MMG30XX Rev 2 1200 f, FREQUENCY (MHz) Figure 18. S21, S11 and S22 versus Frequency Figure 19. 50 Ohm Test Circuit Component Layout Table 10. 50 Ohm Test Circuit Component Designations and Values Part Description Part Number Manufacturer C1, C2 47 pF Chip Capacitors C0805C470J5RAC Kemet C3 68 pF Chip Capacitor C0805C680J5RAC Kemet C4 0.01 μF Chip Capacitor C0603C103J5RAC Kemet C5 (1) 2.7 pF Chip Capacitor 06035J2R7BS AVX L1 22 nH Chip Inductor HK160822NJ - T Taiyo Yuden R1 7.5 W Chip Resistor RK73B2ATTE7R5J KOA Speer 1. Tuning capacitor: Capacitor value and location on the transmission line are varied for different frequencies. NOT RECOMMENDED FOR NEW DESIGN C3 S21, S11, S22 (dB) NOT RECOMMENDED FOR NEW DESIGN R1 MMG3003NT1 RF Device Data Freescale Semiconductor 7 50 OHM APPLICATION CIRCUIT: 1800- 2400 MHz VSUPPLY C4 L1 RF INPUT Z1 DUT Z2 C1 Z3 Z4 Z1, Z7 Z2 Z3 Z4 0.347″ 0.575″ 0.172″ 0.047″ Z6 Z5 C6 C5 VCC x 0.058″ Microstrip x 0.058″ Microstrip x 0.058″ Microstrip x 0.058″ Microstrip Z5 Z6 PCB RF OUTPUT Z7 C2 0.062″ x 0.058″ Microstrip 0.466″ x 0.058″ Microstrip Getek Grade ML200C, 0.031″, εr = 4.1 Figure 20. 50 Ohm Test Circuit Schematic 30 20 S21 R1 C4 C3 10 0 L1 S11 −10 C2 C1 C5 C6 −20 S22 VCC = 6.2 Vdc ICC = 180 mA −30 MMG30XX Rev 2 −40 1600 1800 2000 2200 2400 2600 f, FREQUENCY (MHz) Figure 21. S21, S11 and S22 versus Frequency Figure 22. 50 Ohm Test Circuit Component Layout Table 11. 50 Ohm Test Circuit Component Designations and Values Part Description Part Number Manufacturer C1, C2 47 pF Chip Capacitors C0805C470J5RAC Kemet C3 68 pF Chip Capacitor C0805C680J5RAC Kemet C4 0.01 μF Chip Capacitor C0603C103J5RAC Kemet C5 (1) 1.2 pF Chip Capacitor 06035J1R2BS AVX (1) C6 0.1 pF Chip Capacitor 06035J0R1BS AVX L1 22 nH Chip Inductor HK160822NJ - T Taiyo Yuden R1 7.5 W Chip Resistor RK73B2ATTE7R5J KOA Speer 1. Tuning capacitor: Capacitor value and location on the transmission line are varied for different frequencies. NOT RECOMMENDED FOR NEW DESIGN C3 S21, S11, S22 (dB) NOT RECOMMENDED FOR NEW DESIGN R1 MMG3003NT1 8 RF Device Data Freescale Semiconductor 50 OHM APPLICATION CIRCUIT: 2500 - 2700 MHz VSUPPLY C4 L1 RF INPUT Z1 Z2 DUT C1 Z1, Z6 Z2 Z3 Z3 VCC 0.347″ x 0.058″ Microstrip 0.575″ x 0.058″ Microstrip 0.086″ x 0.058″ Microstrip Z4 Z5 C5 RF OUTPUT Z6 C2 Z4 Z5 PCB 0.085″ x 0.058″ Microstrip 0.404″ x 0.058″ Microstrip Getek Grade ML200C, 0.031″, εr = 4.1 Figure 23. 50 Ohm Test Circuit Schematic 30 S21 20 R1 10 C4 C3 0 L1 S22 −10 C2 C1 C5 −20 S11 VCC = 6.2 Vdc ICC = 180 mA −30 −40 2200 2300 2400 2500 2600 2700 MMG30XX Rev 2 2800 f, FREQUENCY (MHz) Figure 24. S21, S11 and S22 versus Frequency Figure 25. 50 Ohm Test Circuit Component Layout Table 12. 50 Ohm Test Circuit Component Designations and Values Part Description Part Number Manufacturer C1, C2 2.2 pF Chip Capacitors 06035J2R2BS AVX C3 68 pF Chip Capacitor C0805C680J5RAC Kemet C4 0.01 μF Chip Capacitor C0603C103J5RAC Kemet C5 (1) 1.2 pF Chip Capacitor 06035J1R2BS AVX L1 39 nH Chip Inductor HK160839NJ - T Taiyo Yuden R1 7.5 W Chip Resistor RK73B2ATTE7R5J KOA Speer 1. Tuning capacitor: Capacitor value and location on the transmission line are varied for different frequencies. NOT RECOMMENDED FOR NEW DESIGN C3 S21, S11, S22 (dB) NOT RECOMMENDED FOR NEW DESIGN R1 MMG3003NT1 RF Device Data Freescale Semiconductor 9 50 OHM APPLICATION CIRCUIT: 3400 - 3600 MHz VSUPPLY C4 L1 RF INPUT Z1 DUT Z2 C1 Z1, Z6 Z2 Z3 Z3 VCC 0.347″ x 0.058″ Microstrip 0.575″ x 0.058″ Microstrip 0.086″ x 0.058″ Microstrip Z4 RF OUTPUT Z6 Z5 C5 C2 Z4 Z5 PCB 0.085″ x 0.058″ Microstrip 0.404″ x 0.058″ Microstrip Getek Grade ML200C, 0.031″, εr = 4.1 Figure 26. 50 OhmTest Circuit Schematic 20 15 S21 R1 10 C4 C3 5 L1 0 C2 C1 −5 C5 S22 −10 S11 VCC = 6.2 Vdc ICC = 180 mA −15 −20 3200 3300 3400 3500 3600 3700 MMG30XX Rev 2 3800 f, FREQUENCY (MHz) Figure 27. S21, S11 and S22 versus Frequency Figure 28. 50 Ohm Test Circuit Component Layout Table 13. 50 OhmTest Circuit Component Designations and Values Part Description Part Number Manufacturer C1, C2 2.2 pF Chip Capacitors 06035J2R2BS AVX C3 68 pF Chip Capacitor C0805C680J5RAC Kemet C4 0.01 μF Chip Capacitor C0603C103J5RAC Kemet C5 (1) 0.5 pF Chip Capacitor 06035J0R5BS AVX L1 39 nH Chip Inductor HK160839NJ - T Taiyo Yuden R1 7.5 W Chip Resistor RK73B2ATTE7R5J KOA Speer 1. Tuning capacitor: Capacitor value and location on the transmission line are varied for different frequencies. NOT RECOMMENDED FOR NEW DESIGN C3 S21, S11, S22 (dB) NOT RECOMMENDED FOR NEW DESIGN R1 MMG3003NT1 10 RF Device Data Freescale Semiconductor 50 OHM TYPICAL CHARACTERISTICS S11 S21 S12 S22 f MHz |S11| ∠φ |S21| ∠φ |S12| ∠φ |S22| ∠φ 0100 0.141 178.297 12.985 173.850 0 0.057 0.785 0 0.087 - 167.704 0150 0.153 175.556 12.654 168.9 0.057 - 0.913 0.136 - 137.479 0200 0.155 160.177 13.067 164.046 0.059 - 2.423 0.125 - 131.397 0250 0.152 159.068 12.851 160.334 0.058 - 2.897 0.159 - 130.233 0300 0.147 156.309 12.685 156.518 0.058 - 3.227 0.187 - 128.649 0350 0.139 153.853 12.519 152.664 0.058 - 3.971 0.212 - 128.651 0400 0.135 150.838 12.327 149.087 0.057 - 4.471 0.239 - 129.263 0450 0.129 148.378 12.124 145.521 0.057 - 4.799 0.263 - 130.237 0500 0.123 145.160 11.915 142.009 0.057 - 5.285 0.285 - 131.637 0550 0.117 142.332 11.694 138.634 0.057 - 5.623 0.306 - 133.294 0600 0.112 139.364 11.470 135.366 0.057 - 6.012 0.326 - 135.284 0650 0.106 136.769 11.238 132.093 0.057 - 6.295 0.345 - 137.146 0700 0.101 133.592 11.004 128.948 0.057 - 6.705 0.362 - 139.07 0750 0.096 131.187 10.770 125.882 0.057 - 7.044 0.378 - 141.171 0800 0.090 128.979 10.532 122.88 0.056 - 7.277 0.394 - 143.273 0850 0.086 126.711 10.298 119.942 0.056 - 7.495 0.408 - 145.372 0900 0.081 124.541 10.066 117.117 0.056 - 7.847 0.422 - 147.618 0950 0.076 122.189 9.841 114.276 0.056 - 8.05 0.435 - 149.849 1000 0.073 121.191 9.611 111.625 0.056 - 8.311 0.447 - 151.947 1050 0.069 119.451 9.393 108.992 0.056 - 8.582 0.458 - 154.142 1100 0.065 118.827 9.170 106.412 0.056 - 8.89 0.470 - 156.289 1150 0.062 118.851 8.957 103.879 0.056 - 9.079 0.480 - 158.481 1200 0.059 118.882 8.742 101.417 0.056 - 9.405 0.490 - 160.544 1250 0.056 119.703 8.541 99.039 0.056 - 9.615 0.498 - 162.608 1300 0.054 120.919 8.340 96.664 0.056 - 9.805 0.507 - 164.561 1350 0.051 123.223 8.143 94.364 0.056 - 10.198 0.515 - 166.501 1400 0.048 125.019 7.957 92.107 0.056 - 10.536 0.522 - 168.351 1450 0.046 128.063 7.774 89.892 0.056 - 10.724 0.530 - 170.229 1500 0.033 135.869 7.640 87.599 0.057 - 11.197 0.529 - 172.918 1550 0.030 139.127 7.475 85.482 0.057 - 11.434 0.536 - 174.487 1600 0.027 142.585 7.322 83.442 0.057 - 11.649 0.541 - 175.93 1650 0.024 146.640 7.170 81.444 0.057 - 11.993 0.546 - 177.394 1700 0.023 152.580 7.040 79.397 0.058 - 12.335 0.552 - 179.018 1750 0.021 158.266 6.890 77.439 0.058 - 12.616 0.555 179.899 1800 0.021 166.196 6.756 75.477 0.058 - 12.879 0.560 178.582 1850 0.022 171.633 6.621 73.576 0.058 - 13.16 0.563 177.318 1900 0.023 177.431 6.495 71.695 0.058 - 13.445 0.566 176.139 1950 0.025 - 176.142 6.371 69.952 0.059 - 13.806 0.570 175.08 2000 0.027 - 173.137 6.251 67.988 0.059 - 14.176 0.573 173.812 2050 0.029 - 170.367 6.135 66.175 0.059 - 14.413 0.577 172.704 2100 0.031 - 168.467 6.025 64.385 0.060 - 14.882 0.580 171.566 2150 0.033 - 168.388 5.921 62.595 0.060 - 15.338 0.583 170.426 2200 0.036 - 169.515 5.815 60.823 0.060 - 15.659 0.586 169.283 2250 0.039 - 170.197 5.716 59.079 0.061 - 16.136 0.589 168.164 NOT RECOMMENDED FOR NEW DESIGN NOT RECOMMENDED FOR NEW DESIGN Table 14. Common Emitter S - Parameters (VCC = 6.2 Vdc, ICC = 180 mA, TC = 25°C, 50 Ohm System) (continued) MMG3003NT1 RF Device Data Freescale Semiconductor 11 50 OHM TYPICAL CHARACTERISTICS S11 S21 S12 S22 f MHz |S11| ∠φ |S21| ∠φ |S12| ∠φ |S22| ∠φ 2300 0.042 - 171.944 5.618 57.331 0.061 - 16.513 0.591 167.003 2350 0.045 - 173.747 5.525 55.573 0.061 - 16.98 0.593 165.803 2400 0.048 - 175.268 5.431 53.848 0.062 - 17.435 0.595 164.669 2450 0.052 - 177.409 5.345 52.136 0.062 - 17.955 0.597 163.447 2500 0.056 - 178.703 5.258 50.405 0.062 - 18.404 0.598 162.182 2550 0.060 179.650 5.173 48.736 0.063 - 19.004 0.600 160.854 2600 0.063 177.705 5.096 47.012 0.063 - 19.505 0.602 159.516 2650 0.067 175.894 5.015 45.266 0.063 - 20.1 0.603 158.1 2700 0.071 174.932 4.938 43.452 0.064 - 20.75 0.605 156.649 2750 0.074 172.453 4.861 41.831 0.064 - 21.297 0.607 155.174 2800 0.079 170.595 4.788 40.113 0.065 - 21.999 0.609 153.675 2850 0.083 168.962 4.715 38.402 0.065 - 22.577 0.610 152.104 2900 0.087 167.373 4.643 36.711 0.065 - 23.239 0.612 150.539 2950 0.091 165.543 4.573 35.036 0.066 - 23.942 0.614 148.941 3000 0.095 164.513 4.506 33.356 0.066 - 24.652 0.616 147.251 3050 0.099 163.309 4.438 31.684 0.066 - 25.269 0.618 145.747 3100 0.103 162.077 4.373 29.98 0.067 - 26.085 0.620 144.105 3150 0.107 161.249 4.308 28.307 0.067 - 26.717 0.622 142.483 3200 0.110 160.222 4.244 26.653 0.067 - 27.483 0.624 140.894 3250 0.114 159.057 4.182 25.007 0.068 - 28.223 0.626 139.31 3300 0.117 158.018 4.121 23.381 0.068 - 29.013 0.629 137.737 3350 0.119 156.94 4.061 21.791 0.068 - 29.779 0.631 136.267 3400 0.122 155.757 4.004 20.196 0.069 - 30.535 0.633 134.76 3450 0.126 154.754 3.949 18.618 0.069 - 31.29 0.635 6 3500 0.12826 153.898 3.895 17.049 0.06938 - 31.957 0.6367 131.951 3550 0.13168 152.875 3.84045 15.491 0.06971 - 32.814 0.6392 130.655 3600 0.13497 152.157 3.78882 13.97 0.07016 - 33.474 0.64031 129.412 NOT RECOMMENDED FOR NEW DESIGN NOT RECOMMENDED FOR NEW DESIGN Table 14. Common Emitter S - Parameters (VCC = 6.2 Vdc, ICC = 180 mA, TC = 25°C, 50 Ohm System) (continued) MMG3003NT1 12 RF Device Data Freescale Semiconductor 1.7 0.305 diameter 2.49 3.48 5.33 1.27 1.27 0.58 0.86 0.64 3.86 Recommended Solder Stencil NOTES: 1. THERMAL AND RF GROUNDING CONSIDERATIONS SHOULD BE USED IN PCB LAYOUT DESIGN. 2. DEPENDING ON PCB DESIGN RULES, AS MANY VIAS AS POSSIBLE SHOULD BE PLACED ON THE LANDING PATTERN. 3. IF VIAS CANNOT BE PLACED ON THE LANDING PATTERN, THEN AS MANY VIAS AS POSSIBLE SHOULD BE PLACED AS CLOSE TO THE LANDING PATTERN AS POSSIBLE FOR OPTIMAL THERMAL AND RF PERFORMANCE. 4. RECOMMENDED VIA PATTERN SHOWN HAS 0.381 x 0.762 MM PITCH. Figure 29. Recommended Mounting Configuration 2.54 NOT RECOMMENDED FOR NEW DESIGN NOT RECOMMENDED FOR NEW DESIGN 7.62 MMG3003NT1 RF Device Data Freescale Semiconductor 13 NOT RECOMMENDED FOR NEW DESIGN NOT RECOMMENDED FOR NEW DESIGN PACKAGE DIMENSIONS MMG3003NT1 14 RF Device Data Freescale Semiconductor MMG3003NT1 RF Device Data Freescale Semiconductor 15 NOT RECOMMENDED FOR NEW DESIGN NOT RECOMMENDED FOR NEW DESIGN MMG3003NT1 16 RF Device Data Freescale Semiconductor NOT RECOMMENDED FOR NEW DESIGN NOT RECOMMENDED FOR NEW DESIGN PRODUCT DOCUMENTATION Refer to the following documents to aid your design process. REVISION HISTORY The following table summarizes revisions to this document. Revision Date Description 5 Mar. 2007 • Corrected and updated Part Numbers in Tables 8, 10, 11, 12, and 13, Component Designations and Values, to RoHS compliant part numbers, p. 6 - 10 6 July 2007 • Replaced Case Outline 1514 - 01 with 1514 - 02, Issue D, p. 1, 14 - 16. Case updated to add missing dimension for Pin 1 and Pin 3. 7 Mar. 2008 • Removed Footnote 2, Continuous voltage and current applied to device, from Table 2, Maximum Ratings, p. 1 • Corrected Fig. 13, Single - Carrier W - CDMA Adjacent Channel Power Ratio versus Output Power y - axis (ACPR) unit of measure to dBc, p. 5 • Corrected S - Parameter table frequency column label to read “MHz” versus “GHz” and corrected frequency values from GHz to MHz, p. 11, 12 NOT RECOMMENDED FOR NEW DESIGN NOT RECOMMENDED FOR NEW DESIGN Application Notes • AN1955: Thermal Measurement Methodology of RF Power Amplifiers • AN3100: General Purpose Amplifier Biasing MMG3003NT1 RF Device Data Freescale Semiconductor 17 Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516 2100 East Elliot Road Tempe, Arizona 85284 +1 - 800 - 521 - 6274 or +1 - 480 - 768 - 2130 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1 - 8 - 1, Shimo - Meguro, Meguro - ku, Tokyo 153 - 0064 Japan 0120 191014 or +81 3 5437 9125 [email protected] Asia/Pacific: Freescale Semiconductor China Ltd. Exchange Building 23F No. 118 Jianguo Road Chaoyang District Beijing 100022 China +86 010 5879 8000 [email protected] For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1 - 800 - 441 - 2447 or 303 - 675 - 2140 Fax: 303 - 675 - 2150 [email protected] Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2004-2008. All rights reserved. NOT RECOMMENDED FOR NEW DESIGN NOT RECOMMENDED FOR NEW DESIGN How to Reach Us: MMG3003NT1 Document Number: MMG3003NT1 Rev. 7, 3/2008 18 RF Device Data Freescale Semiconductor