NTE NTE5411

NTE5411 thru NTE5416
Silicon Controlled Rectifier (SCR)
4 Amp, Sensitive Gate
Description:
The NTE5411 through NTE5416 are PNPN silicon controlled rectifier (SCR) devices designed for
high volume consumer applications such as temperature, light, and speed control: process and remote control, and warning systems where reliability of operation is important.
Features:
D Passivated Surface for Reliability and Uniformity
D Power Rated at Economical Prices
D Practical Level Triggering and Holding Characteristics
Absolute Maximum Ratings: (TC = +110°C unles otherwise specified)
Repetitive Peak Forward and Reverse Blocking Voltage, VDRM, VRRM
(1/2 Sine Wave, RGK = 1000Ω, TC = –40° to +110°C, Note 1)
NTE5411 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V
NTE5412 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60V
NTE5413 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100V
NTE5414 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200V
NTE5415 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400V
NTE5416 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600V
Non–Repetitive Peak Reverse Blocking Voltage , VRSM
(1/2 Sine Wave, RGK = 1000Ω, TC = –40° to +110°C)
NTE5411 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100V
NTE5412 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100V
NTE5413 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150V
NTE5414 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250V
NTE5415 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450V
NTE5416 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 650V
Average On–State Current, IT(AV)
TC = –40° to +110°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6A
TC = +100°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6A
Surge On–State Current (TC = +90°C), ITSM
1/2 Sine wave, 60Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25A
1/2 Sine wave, 1.5ms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35A
Circuit Fusing (t = 8.3ms), I2t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6A2s
Peak Gate Power (Pulse Width = 10µs, TC = +90°C), PGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5W
Note 1. Ratings apply for zero or negative gate voltage. Devices shall not have a positive bias applied to the gate concurrently with a negative potential on the anode. Devices should not
be tested with a constant current source for forward or reverse blocking capability such that
the voltage applied exceeds the rated blocking voltage.
Absolute Maximum Ratings (Cont’d): (TC = +110°C unles otherwise specified)
Average Gate Power (t = 8.2ms, TC = +90°C), PG(AV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1W
Peak Forward Gate Current, IGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.2A
Peak Reverse Gate Voltage, VRGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V
Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +110°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +150°C
Thermal Resistance, Junction–to–Case, RthJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3°C/W
Thermal Resistance, Junction–to–Ambient, RthJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75°C/W
Mounting Torque (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 in. lb.
Note 2. Torque rating applies with the use of a compression washer. Mounting torque in excess of
6 in. lb. does not appreciably lower case–to–sink thermal resistance. Anode lead and heatsink contact pad are common.
Electrical Characteristics: (TC = +25°C, RGK = 1000Ω unles otherwise specified)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Unit
Peak Forward or Reverse
Blocking Current
IDRM,
IRRM
Rated VDRM or VRRM, TC = +25°C
–
–
10
µA
Rated VDRM or VRRM, TC = +110°C
–
–
200
µA
Peak Forward “ON” Voltage
VTM
ITM = 8.2A Peak, Note 3
–
–
2.2
V
Gate Trigger Current
(Continuous DC, Note 4)
IGT
VAK = 12V, RL = 24Ω
–
–
200
µA
VAK = 12V, RL = 24Ω, TC = –40°C
–
–
500
µA
Gate Trigger Voltage
(Continuous DC)
VGT
Source Voltage = 12V, RS = 50Ω,
VAK = 12V, RL = 24Ω, TC = –40°C
–
–
1
V
Gate Non–Trigger Voltage
VGD
VAK = Rated VDRM, RL = 100Ω,
TC = +110°C
0.2
–
–
V
VAK = 12V, IGT = 2mA, TC = +25°C
–
–
5
mA
Initiating On–State Current = 200mA,
TC = –40°C
–
–
10
mA
Source Voltage = 12V, RS = 6kΩ,
ITM = 8.2A, IGT = 2mA, Rated VDRM,
Rise Time = 20ns, Pulse Width = 10µs
–
2
–
µs
VD = Rated VDRM, TC = +110°C
–
10
–
V/µs
Holding Current
Total Turn–On Time
Forward Voltage Application Rate
IH
tgt
dv/dt
Note 3. Pulse Width = 1ms to 2ms, Duty Cycle = 2%.
Note 4. Measurement does not include RGK current.
.330 (8.38) Max
.175
(4.45)
Max
.450
(11.4)
Max
.118
(3.0)
Dia
.655
(16.6)
Max
.030 (.762) Dia
K
A
G
.090 (2.28)
.130 (3.3)
Max