OTS-1V1ETR Optiva Standard, 1 Composite Video and 1 Duplex 10/100 Mbps Ethernet ™ Composite Video and Ethernet The OTS-1V1ETR provides for the digital transmission of 1 Channel of Composite Video and 1 Channel of Duplex 10/100 Ethernet. Ethernet Data In Ethernet Data Out Video System Design Audio Data Ethernet All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. A L E R T S T A T U S Composite Video In Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. A L E R T S T A T U S Composite Video Out ST, LC, SC or FC ST, LC, SC or FC Optiv a™ Optiv a™ VAD Transmission VAD Transmission OTS-1VT1ETR For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. OTS-1VR1ERT Features • Composite Video and Ethernet over one fiber • 10-Bit Digital Transmission • TDM - Single fiber, dual wavelength • Complies with SMPTE standards for Video transmission Optiva™ Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). The Optiva™ bandwidth requirement of this system is 523 Mbps. • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Professional AV applications Versions Available* Wavelength (nm) & Fiber Transmit/Receive** Receive/Transmit** 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) OTS-1VT1ETR-A1/A3M-XX-IC OTS-1VT1ETR-A2/A3-XX-IC OTS-1VT1ETR-A2/A3D-XX-IC OTS-1VT1ETR-A2/A3H-XX-IC OTS-1VT1ETR-L4/L4-XX-IC OTS-1VR1ERT-A3M/A1-XX-IC OTS-1VR1ERT-A3/A2-XX-IC OTS-1VR1ERT-A3D/A2-XX-IC OTS-1VR1ERT-A3H/A2-XX-IC OTS-1VR1ERT-L4/L4-XX-IC Non-Optical Version OTS-1VT1ETR-NOC-IC OTS-1VR1ERT-NOC-IC Optical Connector Optical Budget (dB) Range*** (km) Form Factor ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC 10 12 17 25 Varies 3 20 40 60 20-70 IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) N/A N/A N/A IC (1-slot) * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Composite Video, Audio & Data Video Standard Bit Resolution Level Bandwidth Differential Gain Differential Phase Compatibility Signal to Noise Ratio Connector Data Standard Data Rate Connector General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Optiva™™Configurable Multi-Signal Optiva Transmission Platform Platform Communication SMPTE 170M; RS-250C 10-Bit Processing; 10-Bit Transmission 1.0 Volt p-p 5.5 MHz < 1% < 0.7° NTSC, PAL > 67 dB BNC (IEC 60169-8) Network Management Management Network SDI HD-SDI SDIand & HD-SDI Composite Video, Video, Composite Audio & & Data Data Audio Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) (Ethernet/Serial/USB) Data Ethernet IEEE 802.3 (Auto-Negotiation) 10/100 Mbps RJ-45 UTP Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 1 Amp Max per Insert Card Less than 1ms CATV/RF & & L-Band L-Band CATV/RF Optical Switching, Switching, Routing Routing Optical & Redundancy & Redundancy 11 oz Passive Multiplexing Multiplexing Passive Solutions Solutions Enclosures, Racks Racks Enclosures, & Frames Frames & Power Supplies Supplies Power and Accessories & Accessories LED Status Indication Compatible with OptivaView™ SNMP Management Suite MADE IN THE USA Sample Configuration