15W DC-DC Converter P15C-Series ● ● ● ● ● ● Output voltage up to 140V 4:1 wide input voltage range Six-Sided continuous shield High efficiency up to 86% Standard 2" x 1.6" x 0.4" package Fixed switching frequency Model selection guide Typ Input nominal Input current voltage full-load [VDC] [mA] Single output P15C24S05 P15C24S12 P15C24S15 P15C48S05 P15C48S12 P15C48S15 P15C48S110 P15C48S140 Dual output P15C24D05 P15C24D12 P15C24D15 P15C48D05 P15C48D12 P15C48D15 Output voltage [VDC] Output current [mA] Efficiency typ. [%] Capacitor load max. [uF] 9 ... 36 9 ... 36 9 ... 36 18 ... 75 18 ... 75 18 ... 75 20 ... 72 20 ... 72 822 801 801 411 401 401 382 373 5 12 15 5 12 15 110 140 3000 1250 1000 3000 1250 1000 140 110 79 82 82 80 82 82 84 86 6800 890 570 6800 890 570 - 9 ... 36 9 ... 36 9 ... 36 18 ... 75 18 ... 75 18 ... 75 822 801 801 411 401 401 ±5 ±12 ±15 ±5 ±12 ±15 ±1500 ±625 ±500 ±1500 ±625 ±500 80 82 82 80 82 82 2 x 1700 2 x 300 2 x 200 2 x 1700 2 x 300 2 x 200 The output voltage can be externally trimmed by using the method shown below. ( ) for dual output trim Circuit diagram 1 6 (5) + INPUT + OUTPUT R - Trim down Remote ON 4 DC/DC - Converter 8 (8) P15Cxxxxx Remote OFF 2 CL 7(7) - INPUT R - Trim up - OUTPUT Page 1 of 2 Deutschland: Inselkammerstraße 10 D-82008 Unterhaching Tel.: 089 614 503-10 E-Mail: [email protected] Schweiz: Gründenstraße 82 CH-8247 Flurlingen Tel.: 052 647 42 00 E-Mail: [email protected] 15W DC-DC Converter P15C-Series Specifications Input Voltage range General Efficiency Switching frequency Isolation voltage Isolation Resistance Isolation Capacitance MTBF Standard in accordance with Environmental Operating temperature 24V type : 9 ... 36 VDC 48V type : 18 … 75 VDC HV type : 20 … 72 VDC π Pi type 24V type : 50 VDC max. 48V type : 100 VDC max. On: open or 3.5..12 VDC Off : 0...1.2 VDC -2.5mA -Input Filter Input surge voltage for 100mS max. Remote CTRL Remote CTRL input current Remote CTRL input reference Output Power Voltage accuracy Trim adjustment range Ripple and noise (at 20 MHz BW) 15W max ± 2% ±10 % 5, 12, 15 V type: 75 mVp-p 110 V type: 100mVp-p 140 V type: 250mVp-p Hiccup, automatics recovery ± 0.5% single: ± 1% dual: ± 5% 110 V,140 V type: ± 1% 500 µs at 25 % load chance ± 0.02% / °C 10 % to maintain the specified regulation Short circuit protection Line voltage regulation Load voltage regulation 10% to full load Transient response recovery time Temperature coefficient Minimum load Dimensions Storage temperature Maximum case temp. Thermal impedance Thermal shock Vibration Humidity Cooling Physical Dimensions Weight Case material Potting material Conducted & radiated emissions See table 300 kHz, typ. 1600 VDC 9 10 Ω min. 300 pF, max. 6 2x10 hrs EN60950, IEC60950, UL1950 -40 °C to +85 °C (with derating) -55 °C to +105 °C +100 °C 10°C/W 8.24 °C/W with heat-sink 7G-0011A MIL-STD-810D 2G, 10-55 Hz, 30 min., XYZ-axis 5% to 95% RH Free-air convection 2 x 1.6 x 0.4 inches 50.8 x 40.6 x 10.4 mm 48 g Nickel-coated copper Epoxy (UL94-V0) EN55022 Level A Derating All dimensions in inches (mm) Pin Pitch tolerance ±0.014 (0.35) Pin connections Pin 1 2 4 5 6 7 8 Single + Input - Input CTRL No pin + Output - Output Trim Dual + Input - Input CTRL + Output Common - Output Trim Life Support Policy: HY-LINE does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Rev: 04 / 2005 f Page 2 of 2 Deutschland: Inselkammerstraße 10 D-82008 Unterhaching Tel.: 089 614 503-10 E-Mail: [email protected] Schweiz: Gründenstraße 82 CH-8247 Flurlingen Tel.: 052 647 42 00 E-Mail: [email protected]