ECO-PACTM 1 Single Phase AC Controller Modules PSW1C175 PSW1H175 IRMS VRRM = 175 A = 600-1600 V Preliminary Data Sheet VRSM VDSM (V) 700 900 1300 1500 1700 VRRM VDRM (V) 600 800 1200 1400 1600 Type PSW1C PSW1C PSW1C PSW1C PSW1C 175/06 175/08 175/12 175/14 175/16 PSW1H PSW1H PSW1H PSW1H PSW1H 175/06 175/08 175/12 175/14 175/16 Symbol Test Conditions IRMS ITRMS ITAVM ITSM TC = 85 °C; 50-400 Hz (per single controller) ∫ i2 dt (di/dt)cr TC = 85 °C; Maximum Ratings 180° sine 175 A 125 A 80 A TVJ = 45 °C t = 10 ms (50 Hz), sine 1500 A VR = 0 t = 8.3 ms (60 Hz), sine 1600 A TVJ = 125 °C t = 10 ms (50 Hz), sine 1350 A VR = 0 t = 8.3 ms (60 Hz), sine 1450 A TVJ = 45 °C t = 10 ms (50 Hz), sine 11250 A²s VR = 0 t = 8.3 ms (60 Hz), sine 10620 A²s TVJ = 125 °C t = 10 ms (50 Hz), sine 9100 A²s VR = 0 8720 A²s 150 A/µs 500 A/µs 1000 V/µs t = 8.3 ms (60 Hz), sine TVJ = 125 °C repetitive, IT = 80 A f=50Hz, tP=200µs VD=2/3VDRM IG=0.45 A non repetitive,IT = ITAVM diG/dt=0.45A/µs (dv/dt)cr TVJ = 125 °C VD=2/3VDRM PGAVM VRGM TVJ TVJM Tstg VISOL TVJ = 125 °C tP=30µs ≤ 10 W IT =ITAVM ≤ 5 W 0.5 W 10 V -40... + 150 150 °C °C -40... + 125 °C 2500 V∼ tP=300µs 50/60 Hz, RMS t = 1 min IISOL ≤ 1 mA 3000 V∼ 1.5 - 1.8 14 - 16 16 Nm lb.in. g t=1s Md Mounting torque (M4) Weight typ. • • • • • • Thyristor controller for AC (circuit W1C acc. to IEC) for mains frequency Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering UL registered, E 148688 Applications • • • • Switching and control of single and three phase AC circuits Light and temperature control Softstart AC motor controller Solid state switches Advantages RGK= ∞, method 1 (linear voltage rise) PGM Features • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight Data according to IEC 60747 refer to a single thyristor unless otherwise stated 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 1 Symbol Test Conditions Characteristic Value ID,IR VT VTO rT VGT TVJ = 125°C, VR = VRRM, VD=VDRM ≤ 5 mA IT = 200 A, ≤ 1.57 V 0.85 V 3.7 mΩ TVJ = 25 °C For power-loss calculations only VD=6V TVJ= 25°C ≤ 1.5 V TVJ=-40°C ≤ 1.6 V ≤ 100 mA IGT VD=6V TVJ= 25°C TVJ=-40°C ≤ 200 mA VGD IGD IL TVJ= 125°C VD=2/3VDRM ≤ 0.2 V TVJ= 125°C VD=2/3VDRM ≤ 10 mA ≤ 450 mA TVJ= 25°C, VD=6V, RGK= ∞ ≤ 200 mA TVJ= 25°C, VD=1/2VDRM ≤ 2 µs per thyristor; DC per module per thyristor; sine 180° el 0.5 0.25 0.65 K/W K/W K/W per module 0.33 K/W Creeping distance on surface Creeping distance in air Max. allowable acceleration 11.2 17.0 50 mm mm m/s² TVJ= 25°C, tP=10µs IG=0.45A, diG/dt=0.45A/µs IH tgd IG=0.45A, diG/dt=0.45A/µs RthJC RthJH ds dA a Package style and outline Dimensions in mm (1mm = 0.0394“) W1C W1H 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20